adios4dolfinx (0.8.1.post0-2) unstable; urgency=medium
 .
   * set OMPI_MCA_rmaps_base_oversubscribe=true to allow 2-process
     tests to run on single CPU systems. Closes: #1071722.

alsa-tools (1.2.11-1.1) unstable; urgency=medium
 .
   * Non-maintainer upload.
   * Use udev.pc to place udev files. (Closes: #1058857)
   * Avoid hard-coding path to udev helpers in udev rules, as it will
     change.
   * Update firmware path to /usr/lib/firmware.

atop (2.10.0-3) unstable; urgency=medium
 .
   * the #gpn22 upload
   * fix crash on 64bit time_t.
     Thanks to Steve Langasek (Closes: #1069859)
   * proper use of pkg-config to allow cross build.
     Thanks to Helmut Grohne (Closes: #1063698)
atop (2.10.0-2) unstable; urgency=medium
 .
   * install to /usr.
     Thanks to Chris Hofstaedtler (Closes: #1060334)
atop (2.10.0-1) unstable; urgency=medium
 .
   * new upstream version 2.10.0
     * avoids floating point exception when atopacctd fails.
       Thanks to Witold Baryluk (Closes: #1053731)
   * refresh patches
   * add libglib2.0-dev to build-depends
   * remove unnecessary lintian override
   * properly use dpkg-buildflags
   * add new patch that honors locally set LDFLAGS
atop (2.9.0-2) unstable; urgency=medium
 .
   * Apply patch to fix dh_installsystemd.
     Thanks to Helmut Grohne (Closes: #1054092)
atop (2.9.0-1) unstable; urgency=medium
 .
   * new upstream version 2.9.0
   * disable mkdate invocation in Makefile
atop (2.8.1-1) unstable; urgency=medium
 .
   * new upstream version 2.8.1
   * activate atopacctd before atop, install atop.default.
     Thanks to Fei Li (Closes: #999448)
   * Remove atop restart from cron.d file (we have a systemd job)
     Thanks to Paweł Bogusławski (Closes: #1020565)
   * Mark atop as buildable without (fake)root
     Thanks to Niels Thykier <niels@thykier.net>
   * simplify 01-numcpus test
   * fix accidentally renamed postinst
   * add debian/README
   * Standards-Version: 4.6.2 (no changes necessary)
atop (2.7.1-2) unstable; urgency=medium
 .
   [ Marc Haber ]
   * we of course need to conflict with acct
   * remove -R from default command line
     upstream has done the same, we're following
     Thanks to Manuel Arostegui (Closes: #896767)
   * fix syntax issue in autopkgtest, add debug output
   * add patch description to atop-rotate-systemctl-path
   * Standards-Version: 4.6.1 (no changes necessary)
   * use https in debian/watch
   * patch some manual page typos flagged by lintian
   * enable all hardening in debian/rules
   * override some lintian warnings
 .
   [ Debian Janitor ]
   * Remove constraints unnecessary since buster
     * atop: Drop versioned constraint on lsb-base in Depends.
     Changes-By: deb-scrub-obsolete
atop (2.7.1-1) unstable; urgency=medium
 .
   * new upstream version 2.7.1
      * atop.service now defining type explicitly
      * Correct disk stats in atopsar
      * documentation changes
   * refresh patches
   * copyright clarification in upstream README
atop (2.7.0-1) unstable; urgency=medium
 .
   * new upstream version 2.7.0
     * better handling of accounting data
     * psacc[su]_atop is no longer necessary
     * make systemdinstall is now make install
   * remove rotation helper logrotate snippets
   * don't start atop-rotate.service, it is invoked by timer
   * remove helper log file imitations in postinst
   * Janitor fixes:
     * use debhelper-compat
     * remove obsolete maintscript entry
     * use secure URI in Homepage field
     * trim trailing whitespace
   * add basic salsa-ci. Thanks to Otto Kekäläinen
   * add Upstream metadata
   * create /etc/default/atop as patch from Upstreams file.
     Thanks to Fei Li (Closes: #999448)
   * remove conflicts on non-existing acct.service
   * add first trivial autopkgtest
   * debian/copyright:
     * clarify license for files without explicit license
     * fix double file name
     * fix a typo
     * update year for debian packagin
atop (2.6.0-2) unstable; urgency=medium
 .
   * The acct coexistence patch was flawed. Improve it
     Thanks to Joerg Dorchain (Closes: #981091)
atop (2.6.0-1) unstable; urgency=medium
 .
   * New upstream version 2.6.0
     * refresh patches
     * adapt debian/copyright
   * fix path to systemctl.
     Thanks to Aaron M. Ucko (Closes: #976125)
   * remove atopsar on debian/rules clean.
     Thanks to Andreas Beckmann (Closes: #976125)
   * add patch to better handle coexistence with the acct package
     Thanks to Sergio Gelato (Closes: #922224)
atop (2.5.0-1+exp1) experimental; urgency=medium
 .
   * upload to experimental
   * add patch to better handle coexistence with the acct package.
     Thanks to Sergio Gelato (Closes: #922224)
atop (2.5.0-1) unstable; urgency=medium
 .
   * new upstream version 2.5.0
     * refresh patches
     * add patch to disable defaults file handling
   * machine readable debian/copyright
   * watch file version 4
   * Rules-Requires-Root
   * debhelper compatibility level 13
   * Standards-Version 4.5.1
   * prevent ls warning from being printed in postinst on new install
   * give back meaning to /etc/default/atop
     Thanks to Thomas Arendsen Hein (Closes: #960393)
atop (2.4.0-3) unstable; urgency=medium
 .
   * upload to unstable
 .
 atop (2.4.0-2) experimental; urgency=medium
 .
   * postinst: check whether atop will read the latest raw file. If not,
     convert the file using atopconvert. Thanks to Sven Hartge (Closes: #919922)
atop (2.4.0-2) experimental; urgency=medium
 .
   * postinst: check whether atop will read the latest raw file. If not,
     convert the file using atopconvert.
atop (2.4.0-1) unstable; urgency=medium
 .
   * New upstream version 2.4.0
     * refresh patches
     * disable atopgpud (needs things from non-free nVidia universe)
     * will now build with glibc 2.28. Thanks to Adrian Bunk (Closes: #916013)
     * will hopefully no longer crash with "Malloc failed for deviated tasks"
       Thanks to Vincent Lefevre for staying on top of this. (Closes: #913910)
     * now calls init script as /bin/bash explicitly. Thanks to Cristian
       Ionescu-Idbohrn (Closes: #853166)
     * command line options are now run-time configurable from
       /etc/defaults/atop. This allows the owners of very big machines to
       turn off options like -R that might affect production on such huge
       boxes. This is mean to address #896767 without deviating from upstream's
       default configuration. Thanks to Manuel Arostegui. This also allows
       local setting of INTERVAL and DAYS. Thanks to Costas Drogos and Roberto
       Suarez Soto (Closes: #861874) (Closes: #877148)
     * now also supports NVMe SSDs. Thanks to Carsten Burkhardt and Damyan
       Ivanov (Closes: #904638)
     * formats process table nicely even with kernel.pid_max > 99999.
       Thanks to Sven Hartge (Closes: #850189)
   * fix outdated mail addresses and URLs in debian/copyright (Closes: #900487)
   * lintian: use dh_maintscript instead of calls to dpkg-maintscript-helper
   * split systemd switch in debian/atop.cron.d in two cron jobs to avoid
     an incomprehensible quoting issue that might cause a cron job to stay
     lingering around on non-systemd systems. Thanks to Arnt Karlsen
     (Closes: #913364)
atop (2.3.0-1) unstable; urgency=medium
 .
   * new upstream release
   * new git URLs
   * Maintainer address on packages.debian.org
   * fix Makefile to allow consecutive clean
   * Standards-Version: 4.1.2 (no changes necessary)
atop (2.2.6-5) unstable; urgency=medium
 .
   * install systemd unit and initscript in dh_auto_install.
     Thanks to Adrian Bunk and nthykier (Closes: #881479)
   * get rid of dh-systemd dependency, bump debhelper dependency
   * bump debhelper level to 10
atop (2.2.6-4) unstable; urgency=medium
 .
   * remove versioned dependency on initscripts. See also #852314.
     Thanks to Stephen Kitt (Closes: 852239)
atop (2.2.6-3) unstable; urgency=medium
 .
   * use nocompress in logrotate files, workaround for logrotate < 3.11.
     Thanks to Yuri D'Elia (Closes: 851138)
   * add reference to #848682 and #484683 to NEWS.
     Thanks to Martin Steigerwald (Closes: 833997)
atop (2.2.6-2) unstable; urgency=medium
 .
   * upload to unstable (finally)
   * add NEWS.Debian explanation for #842136 and #849138
 .
 atop (2.2.6-1~exp1) experimental; urgency=medium
 .
   * New upstream version 2.2.6
     * This is 2.2.5 plus a (yet unreleased) upstream change to
       implement a polling mode in case NETLINK refuses with
       error EINVAL, working around kernel bug 190711.
     * 2.2.6 upstream version used in coordination with Upstream,
       orig.tar.gz created by Debian.
     * This hopefully takes care of installation issues.
       Thanks to Vincent Lefevre (Closes: 848657)
       Thanks to Yuri D'Elia (Closes: 848582)
 .
 atop (2.2.5-1~exp1) experimental; urgency=medium
 .
   * New upstream version 2.2.5
     * This cannot possibly go without saying big THANKS to Upstream.
       Your help was great!
     * Fix c/p Error in man atop(1).
       Thanks to Alexandre Kieffer (Closes: #840645)
     * Take care that atopacctd terminates upon receipt of SIGTERM
       signal. Thanks to Vincent Lefevre (Closes: #834226)
   * install atop-pm to /etc/systemd/system-sleep (Closes: 834039)
   * Architecture: linux-any
   * fix path typo in cron.d.
     Thanks to Sam Morris (Closes: #846954)
 .
 atop (2.2.4-1~exp1) experimental; urgency=medium
 .
   * New upstream version 2.2.4
     * this is an upstream bugfix release
     * adapt patches
   * move "lock" files to /run/lock.
     Thanks to Vincent Lefevre (Closes: #833955)
   * check for systemd via /run/systemd/system.
     Thanks to Sam Morris (Closes: #840407)
   * set nomail in logrotate files (Closes: #833982)
   * fix wrong URL to X-Vcs-Browser
 .
 atop (2.2.3-1~exp1) experimental; urgency=low
 .
   * New upstream version 2.2.3
     * adapt patches
     * fix no-version-symlinks patch
     * add var-run patch to replace /var/run with /run
     * create dummy files in /var/log/atop in postinst
     * install atop.daily to /usr/share instead of /etc
     * move away old log file if upgrading (incompatible format)
     * unfortunately this version is not suitable for unstable since it
       sometimes does not cleanly restart when restarted during the day
   * init scripts:
     * remove debian specific init script
     * use upstream's init scripts, install them using debhelper.
       (Closes: #730167)
     * add dependency on $remote_fs to init scripts
     * implement force-reload in init scripts
     * fix swapped lsb headers (Short-Description and Description)
     * call lsb/init-functions in init scripts
   * systemd units
     * use upstream's systemd units, install them using debhelper
     * do not depend on syslog.target (lintian)
     * put systemd unit in /lib/systemd
     * have systemd unit start atopaccd from /usr/sbin
   * packaging:
     * do call both systemdinstall and sysvinstall. order matters.
     * remove grossly outdated README.Debian and NEWS
     * document in atop.default that the file is no longer used
     * recommend cron | cron-daemon.
       Thanks to Alexandre Detiste (Closes: #798233)
     * fix project homepage in debian/control (Closes: #740359)
     * versioned depends on initscripts (/run)
     * Standards-Version: 3.9.8 (no changes necessary)
     * fix watch file
   * new Debian cron.d script (cross of upstream's two cron.d scripts)
atop (2.2.6-1~exp1) experimental; urgency=medium
 .
   * New upstream version 2.2.6
     * This is 2.2.5 plus a (yet unreleased) upstream change to
       implement a polling mode in case NETLINK refuses with
       error EINVAL, working around kernel bug 190711.
     * 2.2.6 upstream version used in coordination with Upstream,
       orig.tar.gz created by Debian.
     * This hopefully takes care of installation issues.
       Thanks to Vincent Lefevre (Closes: 848657)
       Thanks to Yuri D'Elia (Closes: 848582)
atop (2.2.5-1~exp1) experimental; urgency=medium
 .
   * New upstream version 2.2.5
     * This cannot possibly go without saying big THANKS to Upstream.
       Your help was great!
     * Fix c/p Error in man atop(1).
       Thanks to Alexandre Kieffer (Closes: #840645)
     * Take care that atopacctd terminates upon receipt of SIGTERM
       signal. Thanks to Vincent Lefevre (Closes: #834226)
   * install atop-pm to /etc/systemd/system-sleep (Closes: 834039)
   * Architecture: linux-any
   * fix path typo in cron.d.
     Thanks to Sam Morris (Closes: #846954)
atop (2.2.4-1~exp1) experimental; urgency=medium
 .
   * New upstream version 2.2.4
     * this is an upstream bugfix release
     * adapt patches
   * move "lock" files to /run/lock.
     Thanks to Vincent Lefevre (Closes: #833955)
   * check for systemd via /run/systemd/system.
     Thanks to Sam Morris (Closes: #840407)
   * set nomail in logrotate files (Closes: #833982)
   * fix wrong URL to X-Vcs-Browser
atop (2.2.3-1~exp1) experimental; urgency=low
 .
   * New upstream version 2.2.3
     * adapt patches
     * fix no-version-symlinks patch
     * add var-run patch to replace /var/run with /run
     * create dummy files in /var/log/atop in postinst
     * install atop.daily to /usr/share instead of /etc
     * move away old log file if upgrading (incompatible format)
     * unfortunately this version is not suitable for unstable since it
       sometimes does not cleanly restart when restarted during the day
   * init scripts:
     * remove debian specific init script
     * use upstream's init scripts, install them using debhelper.
       (Closes: #730167)
     * add dependency on $remote_fs to init scripts
     * implement force-reload in init scripts
     * fix swapped lsb headers (Short-Description and Description)
     * call lsb/init-functions in init scripts
   * systemd units
     * use upstream's systemd units, install them using debhelper
     * do not depend on syslog.target (lintian)
     * put systemd unit in /lib/systemd
     * have systemd unit start atopaccd from /usr/sbin
   * packaging:
     * do call both systemdinstall and sysvinstall. order matters.
     * remove grossly outdated README.Debian and NEWS
     * document in atop.default that the file is no longer used
     * recommend cron | cron-daemon.
       Thanks to Alexandre Detiste (Closes: #798233)
     * fix project homepage in debian/control (Closes: #740359)
     * versioned depends on initscripts (/run)
     * Standards-Version: 3.9.8 (no changes necessary)
     * fix watch file
   * new Debian cron.d script (cross of upstream's two cron.d scripts)
atop (1.27.3-1) experimental; urgency=low

  * New upstream version 1.27.3
    * will not exceed 50 MB of memory allocation. Closes: #575547
  * upstream is no longer repacked
  * refresh patches
  * remove virtio-disks patch (applied upstream)
  * remove patch logfiles (applied upstream)
  * fix wrongly escaped quote in atoprc.5 man page

atop (1.26-2) unstable; urgency=low

  * fix typo in bug number in changelog. Sorry, sur5r
  * add patch to handle vd* disks as well (Closes: 640527)
  * remove set -e from init script, /etc/init.d/skeleton doesn't have it
  * Depend on lsb-base (>= 3.2-14) as we use log_* functions
  * streamlinie init script with current skeleton, add default file.
    Thanks to Vincent Lefevre (Closes: 675443)
  * add DEP-3 headers to patches
  * Roll back Debian patches breaking a feature:
    * Now, only use mkstemp to create temp file
    * Roll back Debian change: use upstream cronjob to rotate logs
      (Closes: 611616)
  * merge daily cron job and init script, debianize process
  * use a wrapper to obtain correct redirection
  * add cron to Recommends
  * remove atop binary in clean target

atop (1.26-1) unstable; urgency=low

  * New upstream version 1.26 (Closes: #569175)
    * repack source: remove binary that was contained in the source package
  * use dh level 9, source format 3.0 (quilt)
    * roll back Makefile to original state
    * roll /var/run patch into a quilt patch
    * roll logfile mkstemp patch into a quilt patch
    * add README.source
  * disable most functions of Makefile
    * disable process accounting (no kernel patch)
    * don't install package's init script
    * disable upstream's cron job
    * disable versioned symlinks
    * disable chkconfig call from Makefile
  * postinst: remove path from logrotate, move DEBHELPER last, set -e
  * new init script
    * Thanks to Peter Eisentraut for a patch that didn't get used
      (Closes: #529009)
  * put proper Copyright statement in debian/copyright
  * debian/control
    * add ${misc:Depends}
    * Standards-Version: 3.9.3 (no further changes necessary)
    * versioned build dep on debhelper
    * add Vcs-Lines
  * Import sources to alioth/collab-maint
  * New Maintainer (cleared with mia@qa) (Closes: #646744)

atop (1.23-1.1) unstable; urgency=high

  * Non-maintainer upload.
  * Fix CVE-2011-XXXX: Insecure use of a temporary files rawlog.c and
    acctproc.c (Closes: #622794)

atop (1.22) unstable; urgency=low

  * new upstream release

atop (1.21-1) unstable; urgency=low

  * new upstream release
  * made rules and init.d script lintian clean

atop (1.20-2) unstable; urgency=low

  * do not install upstream's crontab file

atop (1.20-1) unstable; urgency=low

  * New upstream release (Closes: #411133, #372935)
  * include upstream Changelog (Closes: #340093)
  * bumped standards to 3.7.2
  * applied patch to cooperate with sa from acct package, thanks Dominique
    (Closes: #420676)
  * restart daemon by logrotate via invoke-rc.d (Closes: #393545)

atop (1.16-2) unstable; urgency=low

  * depend on logrotate (Closes: #362893), thanks Tommi

atop (1.16-1) unstable; urgency=low

  * New upstream release. Most notable upstream changes:

     - New line with system-level counters called PAG (paging-related counters
       like scan, stall, swin and swout).
     - For network-interfaces the effective line-speed in bits-per-second for
       incoming and outgoing traffic is shown now (so Kbps/Mbps/Gbps).
     - New function '1': show averages *per second* where applicable.
     - Improved output that is easier to parse (fixed number of fields per
       line).

atop (1.15-2) unstable; urgency=low

  * remove log files on purge (Closes: #359083), thanks Justin

atop (1.14-1) unstable; urgency=low

  * New upstream release
  * added URL of the new website where appropriate (copyright, control, README
    and watch)

atop (1.13-1) unstable; urgency=low

  * New upstream release (added recognition of thread-groups and scheduling
    information)
  * fixed missing options in manpage and help-screen

atop (1.12-1) unstable; urgency=low

  * New upstream release

atop (1.10-2) unstable; urgency=low

  * changed default for raw data filename to /var/log/atop.1 to reflect the
    Debian layout (Closes: #217387); adapted man page
  * bumped policy to 3.6.1 (no changes needed)

atop (1.10-1) unstable; urgency=low

  * New upstream release
  * increased storage for a number of resources to allow larger values (like
    reported in #197626)
  * new commands (see /usr/share/doc/atop/NEWS.Debian.gz for details)
  * upstream replaced sys/acct.h by linux/acct.h (Closes: #198890)
  * trailing `pidof atop` removed from init.d/atop (Closes: #199330)

atop (1.9-6) unstable; urgency=low

  * changed some 'long's to 'long long's to prevent overflows at 2GB
    (Closes: #197626)
  * bumped standards to 3.5.10

atop (1.9-5) unstable; urgency=low

  * changed Architecture to any (Closes: #192620)
  * logrotate now should work - seems that atop needs more time after stopping
    via start-stop-daemon than logrotate waits
  * changed maintainer e-mail to my debian account
  * force inclusion of orig.tar.gz via dpkg-buildpackage -sa

atop (1.9-3) unstable; urgency=low

  * fixed upload

atop (1.9-1) unstable; urgency=low

  * Initial Release.
  * removed atop.{daily,24hours,cron}, rely on init.d/atop instead
  * add support for logrotate
  * Initial upload (Closes: #190729)


ccid (1.6.0-1) unstable; urgency=medium
 .
   * New upstream release

corectrl (1.4.1+ds-1) unstable; urgency=medium
 .
   * New upstream release
   * Drop armel-build-failure patch; applied in upstream release

dcmstack (0.9-3) unstable; urgency=medium
 .
   * d/t/control: ignore autopkgtest failures on s390x.
     The package has a history of having always failed tests since debci
     supports s390x sunners.
dcmstack (0.9-2) unstable; urgency=medium
 .
   [ Alexandre Detiste ]
   * patch-out usage of legacy python3-mock
 .
   [ Étienne Mollier ]
   * pytest-8.patch: new: fix test failures with pytest 8.
     (Closes: #1063943, #1071794)
   * d/control: add myself to uploaders.
   * d/control: declare compliance to standards version 4.7.0.
   * d/man/*.1: fix slight issue in scripted manuals.
dcmstack (0.9-1) unstable; urgency=medium
 .
   * Fresh upstream release
     - should have addressed compatibility issues with recent nibabel etc
     - uses pytest (dropping custom debian/patch)
dcmstack (0.8-3) unstable; urgency=medium
 .
   [ Andreas Tille ]
   * Team upload.
   * Standardize repository to Debian Med policy and remove debian/gbp.conf
   * Move repository to Debian Med team Salsa space
   * Maintain package in Debian Med team
   * Fix watch file
   * Standards-Version: 4.6.0 (routine-update)
   * debhelper-compat 13 (routine-update)
   * Secure URI in copyright format (routine-update)
   * Cleanup d/rules
   * Do not parse d/changelog (routine-update)
   * Add salsa-ci file (routine-update)
   * Rules-Requires-Root: no (routine-update)
   * Remove unnecessary 'Testsuite: autopkgtest' header.
   * Set upstream metadata fields: Bug-Database, Bug-Submit, Repository,
     Repository-Browse.
 .
   [ Nilesh Patra ]
   * Add patch to move tests from using nose->pytest
   * Add B-D on pytest instead of nose
   * Fix autopkgtests
   * Improve autopkgtests: run in AUTOPKGTEST_TMP instead of
     source root to ensure they work
   * Avoid generating manpage during build, rather maintain them
     as maintainer manuals
dcmstack (0.8-2) unstable; urgency=medium
 .
   * Replace nosetests-3 with python3 -m nose for autopkgtest invocation
     (Closes: #982119)
dcmstack (0.8-1) unstable; urgency=medium
 .
   * Fresh upstream release
     - should resolve incompatibility with fresh nibabel
   * debian/control
     - Announce that it conflicts with python-dcmstack because they
       both provide /usr/bin scripts; Closes: #946992
   * debian/gbp.conf
     - Added to facilitate usability of our non-standard VCS setup
dcmstack (0.7-2) unstable; urgency=medium
 .
   * Team upload.
   * Drop python2 support; Closes: #942992, #936372, #913015
   * dont fail build if test fails
   * Drop obsolete X-Python fields
   * Build manpage in a PYBUILD_AFTER_INSTALL command
dcmstack (0.7-1) unstable; urgency=medium
 .
   * Fresh upstream release
     + includes python3 support. python3-dcmstack binary package was added
       with necessary changes to debian/{control,rules}
     - debian/patches/* - upstreamed now
dcmstack (0.6.2+git33-gb43919a.1-1) unstable; urgency=low
 .
   * Initial release (Closes: #798040).

dde-network-utils (5.4.13-3) unstable; urgency=medium
 .
   * debian/control:
     + Change pkg-config to pkgconf in B-D.
   * debian/clean:
     + Clean .qm, .gcda and .gcno files to fix
       ftbfs-source-after-build. (Closes: #1044419)

dh-coq (0.9) unstable; urgency=medium
 .
   * coq-check-packages: simplified code.
   * coq_packages.py: more features.

dlm (4.3.0-1) unstable; urgency=medium
 .
   * [9653793] New upstream release (4.3.0)
   * [8a65b69] Delete upstream patches, refresh the rest

dqlite (1.16.4-4) unstable; urgency=medium
 .
   * Cherry-pick upstream fix for nanosecond calculations
dqlite (1.16.4-3) unstable; urgency=medium
 .
   * Revert back to an older fix for alpha and x32 FTBFS
dqlite (1.16.4-2) unstable; urgency=medium
 .
   * Cherry-pick upstream fix for FTBFS on alpha and x32
   * Enable tracing when running tests to help figure out why flaky tests are
     failing (see #1069400)
   * Update Standards-Version to 4.7.0 in d/control (no changes needed)

eartag (0.6.1-1) unstable; urgency=medium
 .
   * Team upload
   * New upstream release
   * Add Build-Depends: blueprint-compiler
   * Bump minimum libadwaita to 1.5
   * Bump Standards Version to 4.7.0

ecryptfs-utils (111-7) unstable; urgency=medium
 .
   * Use no for Rules-Requires-Root.
   * Update debhelper level to 13 .
   * Update Standards-Version to 4.6.2 .
   * Sync with Ubuntu.
 .
   [ Chris Hofstaedtler <zeha@debian.org> ]
   * Install aliases files into /usr (DEP17 M2) (closes: #1060344).
 .
   [ Matthias Klose <doko@ubuntu.com> ]
   * debian/patches/swapfile-support.patch: Fix swapfile support. (LP: #1670336)
   - src/utils/ecryptfs-setup-swap: revise script for a world with swapfiles.
   - src/utils/ecryptfs-setup-swap: make sure we can restart ecryptfs with
     systemd.

efl (1.27.0-2) unstable; urgency=medium
 .
   * B-d on systemd-dev instead of systemd. Closes: #1060602

elixir-ex-doc (0.33.0+dfsg-1) unstable; urgency=low
 .
   * New upstream release.

emacs-cfrs (1.6.0-2) unstable; urgency=medium
 .
   * Add d/salsa-ci.yml with default settings
emacs-cfrs (1.6.0-1) unstable; urgency=medium
 .
   * Initial release (Closes: #1070096)

emacs-lsp-ui (9.0.0-1) unstable; urgency=medium
 .
   [ Debian Janitor ]
   * Remove constraints unnecessary since buster
   * Remove MIA uploaders.  Thanks Thomas Koch for your maintenance
     (Closes: #1019024)
   * Set upstream metadata fields: Bug-Database, Bug-Submit,
     Repository-Browse
   * Update standards version to 4.6.1, no changes needed
   * Set upstream metadata fields: Repository
   * Update standards version to 4.6.2, no changes needed
 .
   [ Xiyue Deng ]
   * New upstream version
   * Update Standards-Version to 4.7.0; no change needed
   * Disable pristine-tar in d/gbp.conf to match the current practice
   * Add myself to uploaders
   * Add elpa-lsp-mode and elpa-flycheck to build-depends in d/control as
     required by tests
   * Enable ERT tests
   * Keep testing files to fix autopkgtest
   * Add d/salsa-ci.yml with default settings
   * Refresh patches
   * Add patches to fix tests
     - Properly provide and require test-helper
     - Fix lsp-ui-doc--make-smaller-empty-lines
     - Disable tests using rustic
   * Update metadata for patches
     - Add upstream bug and forwarded status

emacs-popon (0.13-2) unstable; urgency=medium
 .
   * Add d/salsa-ci.yml with default settings
emacs-popon (0.13-1) unstable; urgency=medium
 .
   * Initial release (Closes: #1068441).

eterm (0.9.6-7.2) unstable; urgency=medium
 .
   * Non-maintainer upload.
   * Apply patch from Steve Langasek <steve.langasek@canonical.com> to fix
     FTBFS. (Closes: #1066342)
eterm (0.9.6-7.1) unstable; urgency=medium
 .
   * Non-maintainer upload.
   * Drop unused Build-Depends: libpcre3-dev. Closes: #1000101.
eterm (0.9.6-7) unstable; urgency=medium
 .
   * Fix FTBFS with imlib2 1.9.1. Closes: #1018023.
     Thanks to Matthew Vernon for pointing me to the patch used by netbsd.
eterm (0.9.6-6.1) unstable; urgency=high
 .
   * Non-maintainer upload.
   * Add patch from rxvt-unicode to fix CVE-2021-33477.
     (Closes: #989041)
eterm (0.9.6-6) unstable; urgency=low
 .
   * New maintainer. Closes: #620507.
   * debian/control: Change Build-Depends from man2html to man2html-base
     to allow cross build from source.
     Thanks to Helmut Grohne for the patch. Closes: #902481.
   * debian/rules: Added hardening=+all to DEB_BUILD_MAINT_OPTIONS.
   * Standards-Version bumped to 3.9.7.
eterm (0.9.6-5) unstable; urgency=medium
 .
   * QA upload.
   * Rename all patches to have .patch ending.
   * Fix Esetroot on PseudoColor visual. Closes: #728813.
     Thanks to Kevin Ryde for the patch.
eterm (0.9.6-4) unstable; urgency=medium
 .
   * QA upload.
   * Eterm now should run shell correctly. Closes: #770369.
eterm (0.9.6-3) unstable; urgency=medium
 .
   * QA upload.
   * Add debian/patches/manpage-is-dated-2008-08-17 to hardcode
     manpage date to the timestamp it has in upstream tarball.
   * debian/control: Pre-Depends: ${misc:Pre-Depends}.
   * debian/rules: Obsolete builddir stuff and use standard dh.
   * debian/eterm.lintian: Update to current version.
   * Add debian/patches/typos-in-eterm-1-in. Closes: #351426.
   * Add debian/patches/typos-in-eterm-reference-html.
   * Fix typo in eterm-utils.1. Closes: #351427.
eterm (0.9.6-2) unstable; urgency=low
 .
   * QA upload.
   * Switch to "3.0 (quilt)" source format.
   * We will do fine without using the build date.
eterm (0.9.6-1) unstable; urgency=low

  * QA upload.
  * New upstream version.
    (Closes: #502316).
  * Add debian/source/format.
  * Remove patch 000_build_hacks.diff
  * Drop quilt as build-depend (no more patches left) and remove patch target
    in debian/rules.
  * debian/control: add Homepage.

eterm (0.9.5-5) unstable; urgency=low

  * QA upload.
  * Provide build-arch target in debian/builddir.mk to fix FTBFS.
    (Closes: #666367).

eterm (0.9.5-4) unstable; urgency=low

  * QA upload.
  * Maintainer field set to QA Group.
  * Pre-Depend on multiarch-support to ensure libEterm.so can be found by the
    dynamic linker at every point during an upgrade.
  * Standards-Version bumped to 3.9.3.
  * debian/eterm.copyright renamed to debian/copyright as per Debian Policy
    Manual section 12.5.
  * ${misc:Depends} added to the dependencies.
  * Text of the BSD license included in debian/copyright.
  * Debhelper compatibility version set to 9.

eterm (0.9.5-3) unstable; urgency=low

  * QA upload.
  * Don't ship .la files (Closes: #621226).

eterm (0.9.4.0debian1-2) unstable; urgency=low

  * debian/copyright: uploaded wrong copy in 0.9.4.0debian1-1

eterm (0.9.4.0debian1-1) unstable; urgency=low

  * New upstream release
  * removed src/grkelot.c and src/gkrelot.h from the orig.tar.gz
  * gkrelot removal and upstream license corrections closes: 359707
  * debian/copyright: added file specific license and copyright info
  * updated standards version to 3.7.2.1
  * removed doc/Eterm.tcap for now

eterm (0.9.3-1) unstable; urgency=low

  * New upstream version + 20060111 CVS pull
  * build depend on libast2-dev (>= 0.7)
  * dropped src/command.c patch introduced in 0.9.2-8.1

eterm (0.9.2-8.1) unstable; urgency=low

  * Non-maintainer upload.
  * Apply patch from Andreas Jochens to fix GCC 4.0 build failure,
    by not casting lvalues (Closes: #297917).
  * debian/control:
    - Remove duplicate Depends lines.
    - Update to Standards-Version 3.6.2.

eterm (0.9.2-8) unstable; urgency=low

  * src/startup.c: disable use of ~/user.cfg, patch provdided by Michael
    Jennings. Thanks.

eterm (0.9.2-7) unstable; urgency=low

  * debian/control: description update: removed unicode support and
    changed Imlib to Imlib2

eterm (0.9.2-6) unstable; urgency=low

  * debian/control: removed Depends ncurses-term. Eterm term definitions
    are in ncurses-base now, thanks to Daniel Jacobowitz.
  * debian/control: adjusted Build-Depends for xlibs-dev split, added:
    libxmu-dev, libsm-dev, libice-dev, libxext-dev, libx11-dev, libxt-dev
  * Closes: Bug#233806, missing README.Escreen, reported by Grant Bowman.
    Thanks.
  * Closes: Bug#243366, saving theme settings saves executed command,
    reported by Ben Armstrong and corrected by upstream. Thanks.
  * Addresses: Bug#244808, compile with disabled title-reporting and
    iconname-reporting, problem reported by Jan Minar. Thanks.
  *

eterm (0.9.2-5) unstable; urgency=low

  * added upstream CVS changes to src/startup.{c,h} for EWMH-compliant
    desktop atom. Fixes a problem with syncing desktop backgrounds that
    was reported by Elmoe.

eterm (0.9.2-4) unstable; urgency=low

  * Closes: Bug#221582, Eterm crashes when Kinput2 (XIM) exits, reported
    and corrected (configure.in patch) by Horms . Thanks.

eterm (0.9.2-3) unstable; urgency=low

  * dancing with buiildds, libast2-dev out of sync snafu
  * corrected source, use non-native format
  * debian/control: Build-Depends: libast2-dev (>= 0.6-0pre2003010606)
  * configure.in: removed another screen test
  * debian/eterm.postinst: removed ldconfig
  * debian/eterm.postrm: removed ldconfig
  * debian/prerm: added #DEBHELPER# tag
  * debian/compat: removed
  * Closes: Bug#205526, postinst's chown should use ':' not '.',
    reported by  Norbert Tretkowski. Thanks.
  * Closes: Bug#172058, minor description improvement, s/unicode/Unicode,
    reported by Martin Michlmayr. Thanks.
  * Closes: Bug#197123, missing Build-Depend, reported by Norbert
    Tretkowski, Thanks. mangled configure.in test
  * Closes: Bug#176274, wrong assumption on char signedness, reported by
    Gerhard Tonn. Fixed upstream by Michael Jennings. Thanks.

eterm (0.9.2-2) unstable; urgency=low

  * converted to CDBS
  * removed configure.in's -lttf and screen tests
  * regenerated various autotools files, config* and all
  * removed debian/compat debian/eterm.shlibs debian/local.shlibs
  * added debian/eterm.install debian/eterm.manpages
  * moved debian/eterm-prerm to debian/eterm.prerm

eterm (0.9.2-1) unstable; urgency=low

  * reverted to actual 0.9.2 source + CVS patches, no code changes
  * options.c patch from Matt Zimmerman corrects PATH_ENV buffer overflow

eterm (0.9.2-0pre2003010602) unstable; urgency=low

  * rebuild for libast2

eterm (0.9.2-0pre2003010601) unstable; urgency=low

  * CVS snapshot


extension-helpers (1.1.1-2) unstable; urgency=medium
 .
   * Team Upload
   * Remove stale dependency on python3-distutils (Closes: #1065856)
   * Set Rules-Requires-Root: no

fcitx5 (5.1.10-1) unstable; urgency=medium
 .
   * New upstream release.

fcitx5-bamboo (1.0.6-1) unstable; urgency=medium
 .
   * New upstream release.

fcitx5-chewing (5.1.4-1) unstable; urgency=medium
 .
   * Team upload.
   * New upstream release.

fcitx5-chinese-addons (5.1.6-1) unstable; urgency=medium
 .
   * New upstream release.

fcitx5-configtool (5.1.6-1) unstable; urgency=medium
 .
   * New upstream release.

fcitx5-hangul (5.1.4-1) unstable; urgency=medium
 .
   * New upstream release.

fcitx5-kkc (5.1.4-1) unstable; urgency=medium
 .
   * New upstream release.

fcitx5-skk (5.1.4-1) unstable; urgency=medium
 .
   * New upstream release.

fcitx5-table-extra (5.1.6-1) unstable; urgency=medium
 .
   * New upstream release.

fcitx5-table-other (5.1.3-1) unstable; urgency=medium
 .
   * New upstream release.

feedbackd (0.3.0-2) unstable; urgency=medium
 .
   * d/control: Fix package description
   * doc: Add NEWS.  It's basically the upstream changelog
   * doc: Add upstream README.
     It contains useful information regarding configuration
     (Closes: #1050601)

geary (46.0-2) unstable; urgency=medium
 .
   * Run dh_auto_test with LIBGL_ALWAYS_SOFTWARE=true to avoid zink stderr
     (Closes: #1072130)
   * Bump Standards Version to 4.7.0

gfxreconstruct (1.0.4+dfsg-1) unstable; urgency=medium
 .
   * New upstream version 1.0.4+dfsg
   * Bump version of libvulkan-dev to >= 1.3.283

glibc (2.38-12) unstable; urgency=medium
 .
   [ Aurelien Jarno ]
   * debian/debhelper.in/libc.postinst: do not try to call telinit if it is
     provided by systemd, it is just broken.  Closes: #1071462.
   * debian/debhelper.in/libc.postinst: test for $DPKG_ROOT first.
   * debian/debhelper.in/libc.postinst: emit libc-upgrade trigger on every
     upgrade and libc-major-upgrade on major glibc upgrade. This interface
     should be used by depending packages to restart themselves if needed.
   * debian/patches/git-updates.diff: update from upstream stable branch.
 .
   [ Dominik Stadler ]
   * debian/local/usr_sbin/update-locale: improve error reporting in
    update-locale.  Closes: #1071084.
 .
   [ Bjarni Ingi Gislason ]
   * debian/local/manpages/gencat.1: editorial fixes.  Closes: #1071549.

glslang (14.2.0-1) unstable; urgency=medium
 .
   [ Timo Aaltonen ]
   * New upstream release.
 .
   [ Philippe SWARTVAGHER ]
   * Convert d/source/format to "3.0 (quilt)"
   * Build-Depends on pkgconf instead of pkg-config
   * Remove spurious ${shlibs:Depends} from Depends of glslang-dev
   * Do not use dpkg-parsechangelog in d/rules, as suggested by Lintian
   * Bump Standards-Version to 4.7.0: no change needed
   * Build with hardening=+all
   * Rename overridden lintian tag binary-without-manpage to no-manual-page
   * Add 'Rules-Requires-Root: no' to d/control
   * Add a patch to fix few typos
   * Add d/upstream/metadata
   * Fix linking glslang and spirv. Closes: #1062799
glslang (14.1.0-1) unstable; urgency=medium
 .
   * New upstream release.
   * control: Bump spirv-tools depends.
   * patches: Refreshed.
glslang (14.0.0-2) unstable; urgency=medium
 .
   * tests, patches: OGLCompiler got removed, update pkgconfig patch and
     tests to link correctly.
glslang (14.0.0-1) unstable; urgency=medium
 .
   * New upstream release.
   * control: Bump spirv-tools depends.
   * patches: Refreshed.

golang-github-imdario-mergo (0.3.16-2) unstable; urgency=medium
 .
   * Team upload.
   * Bump Standards-Version to 4.7.0 (no changes)
   * Symlink to dario.cat/mergo import path

golang-github-xanzy-go-gitlab (0.105.0-1) unstable; urgency=medium
 .
   * New upstream version 0.105.0
   * Add lintian-override for extra-license-file
   * debian/copyright: Add missing entries and update several copyright
     years
   * debian/copyright: Update upstream name and link to upstream source
     project

hamradio-files (20240604) unstable; urgency=medium
 .
   * Update country files to version 20240604.
   * Update supercheckpartial MASTER.SCP to version 2024.06.02.00.

image-analyzer (3.2.6-5) unstable; urgency=medium
 .
   * debian/appstream/net.sf.cdemu.image_analyzer.metainfo.xml:
     - Revert id to previous version, because AppStream documentation and
       implementation are not on the same page. This format should work
       for both.
image-analyzer (3.2.6-4) unstable; urgency=medium
 .
   * debian/appstream/net.sf.cdemu.image-analyzer.metainfo.xml:
     - Change id to correct format.

jfsutils (1.1.15-6) unstable; urgency=medium
 .
   * Use no for Rules-Requires-Root.
   * Update Standards-Version to 4.6.2 .
 .
   [ Helmut Grohne ]
   * Move files to /usr for DEP17 (closes: #1063572).

kakasi (2.3.6-4.2) unstable; urgency=medium
 .
   * Non-maintainer upload.
   * Fix "FTBFS: configure: error: can not use EUC-JP or UTF-8 encoding
     on iconv": add patch kakasi-configure-c99.patch from Fedora.
     (Closes: #1066575)
kakasi (2.3.6-4.1) unstable; urgency=medium
 .
   * Non maintainer upload by the Reproducible Builds team.
   * No source change upload to rebuild on buildd with .buildinfo files.
kakasi (2.3.6-4) unstable; urgency=medium
 .
   * Team upload
 .
   * debian/control
     - revert maintainer address
     - set Standards-Version: 4.2.1
     - drop unnecessary Build-Depends
     - use "Build-Depends: debhelper-compat", instead of debian/compat
   * debian/compat
     - drop it
   * debian/watch
     - use version 4
   * debian/libkakasi2.postinst
     - unnecessary, drop it
kakasi (2.3.6-3) unstable; urgency=medium
 .
   [ Ondřej Nový ]
   * d/changelog: Remove trailing whitespaces
   * d/control: Remove trailing whitespaces
 .
   [ NOKUBI Takatsugu ]
   * d/control: fix email address for tracker
kakasi (2.3.6-2) unstable; urgency=medium
 .
   * Update VCS to new salsa service in compliance to the Debian
     Policy 5.6.26 (version 4.1.4).
   * Migrate from alioth to lists.debian.org for the maintainer address.
     Closes: #899560
   * Bump standards version to 4.1.4 and compat to 11.
   * Format with wrap-and-sort.
kakasi (2.3.6-1) unstable; urgency=medium
 .
   * New upstream release.
kakasi (2.3.5-2) unstable; urgency=medium
 .
   * Fix kakasi-config script.  Closes: #737378
kakasi (2.3.5-1) unstable; urgency=medium
 .
   * New upstream release.
   * Update package with M-A and fortify.
   * Fix manpages over - etc.
   * Add symbols support to libkakasi2.
   * Use UTF-8 for the Japanese documenmtation.
kakasi (2.3.5~pre1+cvs20071101-3) unstable; urgency=medium
 .
   * QA upload.
 .
   [ Logan Rosen ]
   * Use dh-autoreconf instead of autotools-dev to also fix FTBFS on ppc64el
     by getting new libtool macros (still updates config.{sub,guess}; closes:
     #733709).
kakasi (2.3.5~pre1+cvs20071101-2) unstable; urgency=low
 .
   * Set the Maintainer field to Debian QA Group.
kakasi (2.3.5~pre1+cvs20071101-1) unstable; urgency=low

  * Maintainer release.
  * New upstream snapshot (Closes: #184286, #162890, #273249, #273250,
    #545045).
  * Updated Standards-Version to 3.8.4.
  * Switch to dpkg-source 3.0 (quilt) format.
  * Switch to debhelper 7.
  * Updated references to the upstream URL.
  * Now libkakasi2-dev is in section libdevel.
  * Removed symlinks to undocumented(7).
  * Added missing upstream docs.
  * Moved kakasi-config to libkakasi2-dev.

kakasi (2.3.4-3.2) unstable; urgency=low

  * Non-maintainer upload.
  * Fix FTBFS on avr32 (Closes: #535748) and ppc64 (Closes: #327131):
     - Copy config.{guess,sub} before ./configure.
     - Add autotools-dev to Build-Depends accordingly.
  * Fix FTBFS on GNU/kFreeBSD (Closes: #306935):
     - Call “autoreconf -vfi” before ./configure.
     - Add autoconf, automake, libtool to Build-Depends accordingly.
  * Fix watch file (Closes: #449790, #529120):
     - Thanks to Yan Morin for the patch.
  * Fix a few lintian warnings:
     - Use debian/compat rather than DH_COMPAT.
     - Add ${misc:Depends} to Build-Depends.
     - Use ${binary:Version} in Build-Depends.
     - Move dh_installdeb after dh_shlibdeps.

kakasi (2.3.4-3.1) unstable; urgency=low

  * Non-maintainer upload to fix almost empty copyright file.
    (Closes: #381338)

kakasi (2.3.4-3) unstable; urgency=low

  * Added README.wakati (closes: Bug#189803).


kirigami-addons (0.11.0-2) unstable; urgency=low
 .
   * Source only upload
kirigami-addons (0.11.0-1) unstable; urgency=medium
 .
   [ Pino Toscano ]
   * Update copyright.
   * Add new qml-module-org-kde-kirigami-addons-components,
     qml-module-org-kde-kirigami-addons-delegates,
     qml-module-org-kde-kirigami-addons-formcard, and
     qml-module-org-kde-kirigami-addons-settings packages for the new
     QML modules.
 .
   [ Salvo 'LtWorf' Tomaselli ]
   * New upstream release.

libaqbanking (6.5.11beta-1) unstable; urgency=medium
 .
   * New upstream version 6.5.11beta.

libarchive (3.7.2-2.1) unstable; urgency=medium
 .
   * Non-maintainer upload.
   * fix: OOB in rar e8 filter (CVE-2024-26256) (Closes: #1072107)
   * fix: OOB in rar delta filter
   * fix: OOB in rar audio filter

libbusiness-isbn-data-perl (20240601.001-1) unstable; urgency=medium
 .
   * Import upstream version 20240601.001.

libime (1.1.8-1) unstable; urgency=medium
 .
   * New upstream release.

liblocale-codes-perl (3.79-1) unstable; urgency=medium
 .
   * Team upload.
   * Import upstream version 3.79.
   * Declare compliance with Debian Policy 4.7.0.

libtext-kakasi-perl (2.04-6) unstable; urgency=medium
 .
   * debian/control: update Build-Depends for cross builds.
   * Refresh debian/control, set Maintainer to team.
   * Declare compliance with Debian Policy 4.7.0.
   * Set Rules-Requires-Root: no.
   * Bump debhelper-compat to 13.
   * Drop unneeded version constraints from (build) dependencies.
   * Update Build-Depends for cross builds.
   * Use standard Vcs fields for perl package.
   * Update long description.
libtext-kakasi-perl (2.04-5) unstable; urgency=medium
 .
   * d/control: Add Vcs-* fields.
   * d/rules: Use dh. (Closes: #998916)
libtext-kakasi-perl (2.04-4) unstable; urgency=medium
 .
   * Rebuild with libkakasi 2.3.5.
libtext-kakasi-perl (2.04-1) unstable; urgency=low

  * New upstream release
  * New manpages, closes #407091.


lynx (2.9.2-1) unstable; urgency=medium
 .
   * New upstream version.
   * Add 40_out-of-tree-build.diff to allow out of tree build.
   * Use out-of-tree build.

lyx (2.4.0-1) unstable; urgency=medium
 .
   * New upstream version 2.4.0
     - Refresh patches
   * Update Standards-Version to 4.7.0, no changes needed

memcached (1.6.28-1) unstable; urgency=medium
 .
   * New upstream release.

monit (1:5.33.0-2.1) unstable; urgency=medium
 .
   * Non-maintainer upload.
 .
   [ Helmut Grohne ]
   * Let dh_installsystemd choose the location of units (Closes: #1054093)

mp4h (1.3.1-17.1) unstable; urgency=medium
 .
   * Non-maintainer upload.
 .
   [ Yavor Doganov ]
   * debian/patches/pcre2.patch: New; port to PCRE2 (Closes: #1000015).
   * debian/control (Build-Depends): Replace libpcre3-dev with libpcre2-dev.

msgpack-c (6.0.1-3) unstable; urgency=medium
 .
   * Add a libmsgpack-dev transitional package
   * Revert "Move packaging to debian/experimental to prepare for 6.0.0 testing"
msgpack-c (6.0.1-2) unstable; urgency=medium
 .
   * Upload to unstable
 .
 msgpack-c (6.0.1-1) experimental; urgency=medium
 .
   * New upstream release
   * Add a salsa-ci config with nodoc/nocheck profile testing enabled
   * Declare compliance with Policy 4.7.0, no changes needed
 .
 msgpack-c (6.0.0-5) experimental; urgency=medium
 .
   * Revert "Remove "Provides: libmsgpack-dev" from libmsgpack-c-dev" so
     packages which already support both library names don't need any source
     changes.
 .
 msgpack-c (6.0.0-4) experimental; urgency=medium
 .
   * Remove "Multi-Arch: same" from libmsgpack-c-dev
   * Fix directory name in jdupes command
 .
 msgpack-c (6.0.0-3) experimental; urgency=medium
 .
   * autopkgtest: Depend on libmsgpack-c-dev, not libmsgpack-dev
 .
 msgpack-c (6.0.0-2) experimental; urgency=medium
 .
   * Add Breaks/Replaces for libmsgpack-dev < 6.0.0-1~ (Closes: #1037928)
   * Remove "Provides: libmsgpack-dev" from libmsgpack-c-dev
 .
 msgpack-c (6.0.0-1) experimental; urgency=medium
 .
   * New upstream release
     + CMake project renamed from msgpack to msgpack-c
     + Library renamed from msgpackc to msgpack-c
   * Define whether to build tests based on $DEB_BUILD_OPTIONS
   * Update packaging for msgpackc -> msgpack-c library renaming
   * Drop Depends: libmsgpack-cxx-dev (Closes: #1018679)
   * Declare compliance with Policy 4.6.2, no changes needed
msgpack-c (6.0.1-1) experimental; urgency=medium
 .
   * New upstream release
   * Add a salsa-ci config with nodoc/nocheck profile testing enabled
   * Declare compliance with Policy 4.7.0, no changes needed
msgpack-c (6.0.0-5) experimental; urgency=medium
 .
   * Revert "Remove "Provides: libmsgpack-dev" from libmsgpack-c-dev" so
     packages which already support both library names don't need any source
     changes.
msgpack-c (6.0.0-4) experimental; urgency=medium
 .
   * Remove "Multi-Arch: same" from libmsgpack-c-dev
   * Fix directory name in jdupes command
msgpack-c (6.0.0-3) experimental; urgency=medium
 .
   * autopkgtest: Depend on libmsgpack-c-dev, not libmsgpack-dev
msgpack-c (6.0.0-2) experimental; urgency=medium
 .
   * Add Breaks/Replaces for libmsgpack-dev < 6.0.0-1~ (Closes: #1037928)
   * Remove "Provides: libmsgpack-dev" from libmsgpack-c-dev
msgpack-c (6.0.0-1) experimental; urgency=medium
 .
   * New upstream release
     + CMake project renamed from msgpack to msgpack-c
     + Library renamed from msgpackc to msgpack-c
   * Define whether to build tests based on $DEB_BUILD_OPTIONS
   * Update packaging for msgpackc -> msgpack-c library renaming
   * Declare compliance with Policy 4.6.2, no changes needed

namazu2 (2.0.21-24) unstable; urgency=medium
 .
   * Remove -Werror=implicit-function-declaration flag on configure (Closes: #1066430)
namazu2 (2.0.21-23) unstable; urgency=medium
 .
   * d/control: Add Homepage and Vcs-*
namazu2 (2.0.21-22.2) unstable; urgency=medium
 .
   * Non-maintainer upload.
   * Switch to debhelper-compat (= 13).
   * Sanitize debhelper usage.  (Closes: #979301, #980776)
   * Don't skip the tests, but ignore failures for now.
   * Minor cleanups.
namazu2 (2.0.21-22.1) unstable; urgency=medium
 .
   * Non maintainer upload by the Reproducible Builds team.
   * No source change upload to rebuild on buildd with .buildinfo files.
namazu2 (2.0.21-22) unstable; urgency=medium
 .
   * d/p/0002-escape-branckets.patch: escape branckets in regex,
     Closes: #890012
   * d/control: s/apache/apache2/
namazu2 (2.0.21-21) unstable; urgency=medium
 .
   * debian/rules: remove -pie from maint option, closes: 865610
namazu2 (2.0.21-20) unstable; urgency=medium
 .
   * debian/emacsen-*: Update from new deb-make template.
   * debian/patches/0001-fix-old-backquote.patch: Remove ancienct backquote
namazu2 (2.0.21-19) unstable; urgency=medium
 .
   * debian/rules: fix build error on binary-indep, closes: #832531
namazu2 (2.0.21-18) unstable; urgency=medium
 .
   * debian/control: Change Breaks, Replaces from namazu2-index-tools
     to namazu2.
namazu2 (2.0.21-17) unstable; urgency=medium
 .
   * debian/control: Add Breaks, Replaces headers, some tools moved from
     namazu2-index-tools to namazu2, closes: #833335.
namazu2 (2.0.21-16) unstable; urgency=medium
 .
   * Remove mknmz.1.gz from namazu2 package, closes: #833335.
namazu2 (2.0.21-15) unstable; urgency=medium
 .
   * Remove some $(CURDIR), closes: #832531.
namazu2 (2.0.21-14) unstable; urgency=medium
 .
   * debian/rules: ignore status of rm, closes: #831251.
namazu2 (2.0.21-13) unstable; urgency=medium
 .
   * Change to use dh version 9, source format 3.0 (quilt)
namazu2 (2.0.21-12) unstable; urgency=medium
 .
   * debian/rules: commented dh_undocumented out more, Closes: #815607
namazu2 (2.0.21-11) unstable; urgency=medium
 .
   * debian/rules: commented dh_undocumented out, Closes: #815607
namazu2 (2.0.21-10) unstable; urgency=medium
 .
   * filter/mp3.pl: Remove ineffective regex, Closes: #762533.
namazu2 (2.0.21-9) unstable; urgency=medium
 .
   * Use dh_autoreconf closes: #736697
     Reported by Logan Rosen, thank you.
namazu2 (2.0.21-8.1) unstable; urgency=low
 .
   * Non-maintainer upload.
   * Switched to tk build-dependency instead of tk8.4 because the package
     needs /usr/bin/wish which soon will be provided only by tk,
     Closes: #725027
namazu2 (2.0.21-8) unstable; urgency=low
 .
   * Add pt_BR.po , Closes: #693379
namazu2 (2.0.21-6) unstable; urgency=low
 .
   * Remove cgidirs in postrm, Closes: #688498
namazu2 (2.0.21-5) unstable; urgency=low
 .
   * Remove /etc/namazu/cgidirs from conffiles.
namazu2 (2.0.21-4) unstable; urgency=low
 .
   * Specify conffiles explicitly, Closes: #688498
namazu2 (2.0.21-3.1) unstable; urgency=low

  * Non-maintainer upload.
  * Fix typo in debconf templates. Closes: #657679
  * Fix pending l10n issues. Debconf translations:
    - Danish (Joe Hansen).  Closes: #621369
    - Polish (Michał Kułach).  Closes: #657970
    - Italian (Francesca Ciceri).  Closes: #658200

namazu2 (2.0.21-3) unstable; urgency=low

  * Update autotools for kFreeBSD (closes: #634772).

namazu2 (2.0.21-2) unstable; urgency=low

  * Update config.guess (closes: #634772).

namazu2 (2.0.21-1) unstable; urgency=low

  * New upstream release

namazu2 (2.0.20-2) unstable; urgency=low

  * Remove .la file (closes: #622426).

namazu2 (2.0.20-1.0+nmu1) unstable; urgency=low

  * Non-maintainer upload.
  * Fix "FTBFS in squeeze: Nonexistent build-dependency: 'tk8.3'"
    switch build dependency to "tk8.4 | wish" since tk8.3 is gone
    (closes: #595845).
  * Fix lintian error "weak-library-dev-dependency libnmz7-dev on libnmz7" by
    adding "(= ${binary:Version})" to libnmz7-dev's Depends.

namazu2 (2.0.20-1.0) unstable; urgency=low

  * New upstream.
  * Run autoreconf -ivf, Closes: #501401

namazu2 (2.0.17-1) unstable; urgency=low

  [ NOKUBI Takatsugu ]
  * New upstream release

namazu2 (2.0.17~rc4-2) unstable; urgency=low

  * Added es.po, closes: #408853.

namazu2 (2.0.17~rc4-1) unstable; urgency=low

  [ NOKUBI Takatsugu ]
  * Release Candidate 4.

namazu2 (2.0.17~rc3-1) unstable; urgency=low

  [ NOKUBI Takatsugu ]
  * Release Candidate 3.

namazu2 (2.0.17~rc2-1) unstable; urgency=low

  [ NOKUBI Takatsugu ]
  * Release Candidate 2.

namazu2 (2.0.17~rc1-2) unstable; urgency=low

  * Updated libtool, closes: #392566.

namazu2 (2.0.17~rc1-1) unstable; urgency=low

  * Release Candidate 1.

namazu2 (2.0.16-8) unstable; urgency=low

  * Fixed invalid de.po message, closes: #275868.

namazu2 (2.0.16-7) unstable; urgency=low

  * Removed loading confmodules in postrm, closes: #388666.

namazu2 (2.0.16-6) unstable; urgency=low

  * More cleanup bashism, closes: #377128.

  * Fixed tknamazu related invalid DESTDIR, closes: #377536.

namazu2 (2.0.16-5) unstable; urgency=low

  * Cleanup bashism, closes: #376480.

  * debian/rules: Fixed some tknamazu related things.

namazu2 (2.0.16-4) unstable; urgency=low

  * Regenerate configure.

namazu2 (2.0.16-3) unstable; urgency=low

  * Added file on Build-Depends, it would be close #361022.

namazu2 (2.0.16-2) unstable; urgency=low

  * Updated libtool, it would be close #361022.

namazu2 (2.0.16-1) unstable; urgency=high

  [ NOKUBI Takatsugu ]
  * New upstream release
  * Fixed directory traversal issue.
    ref: http://www.namazu.org/security.html#dir-traversal
  * Fixed debconf issue, closes: #332043.
  * Updated de.po, closes: #275868.
  * Added vi.po, closes: #315657.
  * Added cs.po, closes: #318594.
  * Added sv.po, closes: #331561.
  * Fixed emacs startup script, closes: #251807.

namazu2 (2.0.15-1) unstable; urgency=low

  * New upstream release

namazu2 (2.0.14-2.1) unstable; urgency=high

  * Non-maintainer upload.
  * High-urgency upload for sarge-targetted RC bugfix.
  * Package contained up-to-date ltmain.sh and aclocal.m4, but the
    configure script was not updated to match.  Re-run autoconf, so that
    libtool library detection is done correctly on arm.  Closes: #292565.

namazu2 (2.0.14-2) unstable; urgency=low

  * Changed wish path in tknamazu, closes: #288689.

namazu2 (2.0.14-1) unstable; urgency=high

  * New upstream release

  * Fix cross-site scripting on namazu.cgi

  * Fixed description, chasen was already installed in Debian.

namazu2 (2.0.13-4) unstable; urgency=low

  * Moved "dh_movefiles -pnamazu2-common" from binary-indep target to
    install target, closes Bug#260745.

namazu2 (2.0.13-3) unstable; urgency=low

  * Added versioning conflict to avoid an overwriting file, closes: #256579.

namazu2 (2.0.13-2) unstable; urgency=low

  * Added some versioning dependency, closes: #250184.
  * Updated latest libtool, closes: #253606.
  * Changed description for libnmz*, closes: #210121.

namazu2 (2.0.13-1) unstable; urgency=low

  * New upstream release

namazu2 (2.0.12-4) unstable; urgency=low

  * Updated debian/po/ja.po, closes: #241803.

namazu2 (2.0.12-3) unstable; urgency=low

  * Added debian/po/fr.po, closes #240858.

namazu2 (2.0.12-2) unstable; urgency=low

  * Moved document files into namazu2-common, closes #189374.
  * Switched to po-debconf, closes #237438.
  * Fixed a typo, closes #178760.
  * Changed index directory on namazurc example, closes #222761.


neochat (23.08.5-2) unstable; urgency=medium
 .
   * Team upload.
   * Add missing QML dependencies
neochat (23.08.5-1) unstable; urgency=medium
 .
   * Team upload.
   * New upstream release.
   * Update the build dependencies according to the upstream build system:
     - bump Qt packages to 5.15.8
     - bump libquotient-dev to 0.7
     - add libqt5sql5-sqlite for the tests
   * Bump Standards-Version to 4.7.0, no changes required.
   * Add more runtime dependencies needed by the new version: libqt5sql5-sqlite,
     qml-module-org-kde-quickcharts, and qml-module-qtlocation.
   * Add -ffloat-store -fexcess-precision=fast to the CXXFLAGS on i386
     architectures to fix float usages/comparisons.
   * The rebuild with libquotient 0.7+ will enable the support for E2EE
     encryption. (Closes: #1040931)

network-manager (1.48.0-1) unstable; urgency=medium
 .
   * New upstream version 1.48.0
   * Drop automake Build-Depends, no longer needed after the switch to Meson
   * Bump 1.47.90 symbol versions to 1.48.0 for the final release

ninja-build (1.12.1-1) unstable; urgency=medium
 .
   * New upstream release.
   * Drop support_32bit_system_like_i386.patch, applied upstream.
   * Build using cmake instead of using upstream's bootstrapping script.
     It doesn't support building the unit tests anymore.

nmzmail (1.1-4) unstable; urgency=medium
 .
   * QA upload.
   * Convert to 3.0 source format. Closes: #1007374.
nmzmail (1.1-3) unstable; urgency=medium
 .
   * QA upload.
   * Set maintainer to Debian QA Group <packages@qa.debian.org>. (see: #929541)
nmzmail (1.1-2) unstable; urgency=low
 .
   * debian/control:
     + Updated Standards-Version to 3.9.3.
     + Add ${misc:Depends} to binary Depends.
     + Add dpkg-dev to Build-Depends to support hardening.
     + Updated debhelper version to 9.2~.
   * debian/compat updated from 7 to 9.
   * Changes to debian/rules to support hardening.
   * Closing bug related to modifying conffiles. These files were modified by
     namazu2 and were addressed in Bug #688498. Closes: #688290.
   * A mutt macro and cron suggestion are provided in the man page. Additional
     usage details are suggested in README.Debian. Closes: #552731.
nmzmail (1.1-1) unstable; urgency=low

  * New upstream release.
  * debian/control:
    + Updated Standards-Version to 3.8.3.
    + Updated debhelper version to 7.4~.
    + Updated Build-Depends from to libreadline-dev. Closes: #553816.
  * debian/compat updated from 5 to 7.
  * Removed obsolete file debian/docs.
  * debian/rules:
    + Changed dh_clean -k to dh_prep.

nmzmail (0.1.3-3) unstable; urgency=low

  * Small grammatical changes to the nmzmail man file. Thanks to Reuben
    Thomas. Closes: #438809.

nmzmail (0.1.3-2) unstable; urgency=low

  * Bumped debian/compat to 5.
  * debian/control:
    + Bumped debhelper version to 5.
    + Bumped Standards-Version to 3.7.2. No changes.
    + Updated homepage address.
  * Updated homepage address in debian/copyright and README.Debian.
  * Fixed debian/watch.
  * Removed some cruft from debian/rules.
  * Changed to new e-mail address for all maintainer fields throughout
    debian/*.

nmzmail (0.1.3-1) unstable; urgency=low

  * Initial release Closes: #325043


pgbackrest (2.52-1) unstable; urgency=medium
 .
   [ Bradford D. Boyle ]
   * New Upstream Release
     - Features:
       * Add GCS batch delete support.
       * S3 SSE-C encryption support.
       * PostgreSQL 17 support.
     - Improvements:
       * Allow explicit disabling of optional dependencies in meson builds.
       * Dynamically find python in meson build.
       * Tag pgbackrest build target in meson as installable.
     - Documentation Improvements:
       * Update start/stop documentation to reflect actual functionality.
 .
   [ Christoph Berg ]
   * Depend on python 3.10 | python3-distutils.

php-giggsey-libphonenumber (8.13.26-3) unstable; urgency=medium
 .
   * Team upload.
   * Fix compatibility with pkg-php-tools 1.45
   * Fix PHPUnit 11 compatibility (Closes: #1070549)

php-giggsey-locale (2.5-2) unstable; urgency=medium
 .
   * Team upload.
   * Fix compatibility with pkg-php-tools 1.45
   * Fix PHPUnit 11 compatibility (Closes: #1070550)

pkg-js-tools (0.15.21) unstable; urgency=medium
 .
   * Add command pkgjs
     (simple wrapper to replace yarn during Debian package build)
   * Clean debian/rules (drop useless fields)

plasma-wayland-protocols (1.13.0-1) unstable; urgency=medium
 .
   [ Aurélien COUDERC ]
   * New upstream release (1.13.0).
   * Bump Standards-Version to 4.7.0, no change required.

plasma-workspace (4:5.27.11.1-1) unstable; urgency=medium
 .
   [ Patrick Franz ]
   * New upstream release 5.27.11.1, fixes CVE-2024-36041.
   * Build-depend on pkgconf instead of pkg-config as the latter has been
     superseded by the former.

plpgsql-check (2.7.6-1) unstable; urgency=medium
 .
   * New upstream version 2.7.6.

psensor (1.2.1-2) unstable; urgency=medium
 .
   [ Gianfranco Costamagna ]
   * Add unity integration
   * Add two proposed upstream patches to fix FTBFS.
     - 30.patch: clean generated manpages, fixing build twice in a row
       (Closes: #1045882)
     - 31.patch: make sure manpage generation depends on the generated
       binary, not on the source code (fixing parallel builds)
psensor (1.2.1-1) unstable; urgency=medium
 .
   [ xiao sheng wen ]
   * New maintainer (Closes: #1072190) "ITS: psensor"
   * New upstream version (Closes: #953896)
   * Bump Standards-Version: 4.7.0
   * debhelper-compat 13 (routine-update)
   * Secure URI in copyright format (routine-update)
   * Add salsa-ci file (routine-update)
   * Rules-Requires-Root: no (routine-update)
   * Use secure URI in Homepage field. (routine-update)
   * Remove overrides for lintian tags that are no longer supported:
     no-upstream-changelog, no-upstream-changelog, no-upstream-changelog
   * watch file standard 4 (routine-update)
   * Apply multi-arch hints. (routine-update)
     + psensor-common: Add Multi-Arch: foreign.
   * refresh d/patches for new upstream version
   * add d/p/test-cppcheck.sh-check-level=exhaustive.patch (Closes: #1071336)
   * not install *.html doc
   * d/rules: add export DEB_BUILD_MAINT_OPTIONS = hardening=+all
   * d/watch: use https uri
   * add d/u/metadata
   * d/control:
       - remove Recommends hddtemp in psensor-server (Closes: #1001944)
       - Annotate perl build dependency with :native (Closes: #912694)
       - update Vcs-Browser Vcs-Git to salsa
   * d/copyright: add 2024 xiao sheng wen <xsw@atzlinux.com> line
   * update new d/u/signing-key.asc key, not outdate
 .
   [ Jean-Philippe Orsini ]
   * debian/control
       + build dependency to asciidoctor-base. (Closes: #850369)
   * added missing glade file

pyim-el (5.3.4-1) unstable; urgency=medium
 .
   * New upstream version 5.3.4
   * d/control: Declare Standards-Version 4.7.0 (no changes needed)
   * d/copyright: Bump copyright years

python-hypothesis (6.103.0-1) unstable; urgency=medium
 .
   * New upstream version 6.103.0
   * Reenable ghostwriter tests (fixed by upstream)

python-itemloaders (1.3.1-1) unstable; urgency=medium
 .
   * New upstream version.

python-preshed (4.0.0-2) unstable; urgency=medium
 .
   * Team upload.
   * Skip two legacy tests on big-endian.
python-preshed (4.0.0-1) unstable; urgency=medium
 .
   * Team upload.
   * New upstream version
   * Remove dependency on python3-distutils (Closes: #1065933)
   * Standards-Version: 4.7.0 (routine-update)
   * Build-Depends: s/dh-python/dh-sequence-python3/ (routine-update)
   * Rules-Requires-Root: no (routine-update)

python-pyproject-hooks (1.1.0-1) unstable; urgency=medium
 .
   * d/watch: Switch to GitHub tarballs to fix uscan
   * Update to new upstream release 1.1.0
   * Update Standards-Version to 4.7.0 (no changes needed)

r-cran-qlcmatrix (0.9.8-1) unstable; urgency=medium
 .
   * Team upload.
   * New upstream version
   * Standards-Version: 4.7.0 (routine-update)
   * Set upstream metadata fields: Archive, Bug-Database, Bug-Submit, Repository,
     Repository-Browse.

r-cran-rcpparmadillo (0.12.8.4.0-1) unstable; urgency=medium
 .
   * New upstream release

r-cran-sparsem (1.83-1) unstable; urgency=medium
 .
   * New upstream release
 .
   * debian/control: Set Build-Depends: to current R version
   * debian/control: Set Standards-Version: to current version
   * debian/control: Switch to virtual debhelper-compat (= 13)

request-tracker4 (4.4.7+dfsg-1.1) unstable; urgency=medium
 .
   * Non-maintainer upload.
   * No source change upload to move systemd units into /usr.
     (Closes: #1072075)

ruby-googleapis-common-protos-types (1.14.0-1) unstable; urgency=medium
 .
   * Team upload
   * New upstream version 1.14.0

ruby-kakasi-ffi (1.0.2-4) unstable; urgency=medium
 .
   * Team Upload.
     - Re-build against new ruby and get autopkgtests passing
       (Closes: #1033910)
   [ Debian Janitor ]
   * Apply multi-arch hints. + ruby-kakasi-ffi: Add Multi-Arch: same.
 .
   [ Nilesh Patra ]
   * Bump Standards-Version to 4.6.2 (no changes needed)
ruby-kakasi-ffi (1.0.2-3) unstable; urgency=medium
 .
   * Team upload
 .
   [ Utkarsh Gupta ]
   * Add salsa-ci.yml
 .
   [ Cédric Boutillier ]
   * Use https:// in Vcs-* fields
   * Update team name
   * Add .gitattributes to keep unwanted files out of the source package
   * Move debian/watch to gemwatch.debian.net
   * Bump Standards-Version to 4.5.1 (no changes needed)
   * Drop compat file, rely on debhelper-compat and bump compat level to 13
   * (build-)depend on ruby-ffi explicitly, fixing autopkgtests
   * Use ${ruby:Depends} for dependencies
   * Remove explicit dep on ruby interpreter
   * Rules does not require root
   * Use https in copyright format URL
   * Update Vcs-* fields to point to salsa
   * Add upstream metadata
   * Remove test control file
   * Install README.md as doc
   * Use gem install layout
   * Install README.md as doc
ruby-kakasi-ffi (1.0.2-2) unstable; urgency=medium
 .
   * Team upload.
   * Support "make clean" target (Closes: #762133)
ruby-kakasi-ffi (1.0.2-1) unstable; urgency=medium
 .
   * Team upload.
   * New upstream version
   * Update Debian packaging using dh-make-ruby -w
   * Update Standards-Version to 3.9.7 (no source level changes)
   * Fix missing build dependency libkakasi2-dev (Closes: #762133)
   * Run tests without bundler
ruby-kakasi-ffi (1.0.1-1) unstable; urgency=medium
 .
   * Initial release (Closes: #760262)

shaderc (2023.8-1) unstable; urgency=medium
 .
   * New upstream release
     - Refresh patches
     - Add patch to fix name of Python interpreter
     - Fix FTBFS (Closes: #1058397)
     - Refresh d/glslc.lintian-overrides
   * Fix linking of libshaderc.so, add autopkgtest (Closes: #1029939)
   * Add obj-x86_64-linux-gnu to d/clean
   * Use printf instead of echo to generate build-version.inc. Thanks to
     Vagrant Cascadian! (Closes: #1035324)
   * Build-Depends on pkgconf instead of pkg-config
   * d/copyright: update copyright year
   * Add Built-Using since we are linking against static libraries

snmptrapfmt (1.19) unstable; urgency=medium
 .
   * QA upload
   * d/copyright: Convert to machine-readable format
   * Drop non-existing Homepage
   * Convert to source format 3.0
   * Update debhelper to compat 13
   * Use dh for building
   * Source init functions
   * Add missing Pre-Depends
 .
   [ Jelmer Vernooij ]
   * Migrate repository from alioth to salsa
 .
   [ Leos Kunc ]
   * Process longer SNMP trap lines without dying (Closes: #805635)

specreduce (1.4.0-2) unstable; urgency=medium
 .
   * Don't install non-package files (Closes: #1072391)
specreduce (1.4.0-1) unstable; urgency=medium
 .
   * New upstream version 1.4.0
   * Rediff patches
   * Push Standards-Version to 4.7.0. Add Rules-Requires-Root: no
   * Build-Depend on pybuild-plugin-pyproject
   * Add photutils to test dependencies

syndication (1:5.115.0-3) unstable; urgency=medium
 .
   [ Aurélien COUDERC ]
   * Mark a test-only symbol as optional to fix building with the `nocheck’
     build profile. Thanks to Samuel Thibault for the bug report and fix.
     (Closes: #1072338)

tetex-brev (4.24-3) unstable; urgency=medium
 .
   * Include patch from upstream to switch to UTF-8.
   * Updated Standards-Version from 4.6.2 to 4.7.0.

tin (1:2.6.4~20240531-1) unstable; urgency=medium
 .
   * New upstream snapshot.

tmate (2.4.0-3) unstable; urgency=medium
 .
   [ francisco1code ]
   * Change Forwarded to Applied-Upstream:
     - d/p/04-fix-spelling-error-in-binary.patch.
     - d/p/03-manpage.patch.
   * d/watch: Change upstream tarball path.
 .
   [ Sergio de Almeida Cipriano Junior ]
   * d/rules: Simplify target by using execute_before_* from dh 13.
   * d/p/0004-Fix-finding-msgpack-6.patch: Backport fix for msgpack 6+
     Thanks to James McCoy for the bug report (Closes: #1070693).
   * d/patches: Rename and refresh patches with gbp.
   * Update build dependency: libmsgpack-dev -> libmsgpack-c-dev.
   * d/rules: export DEB_BUILD_MAINT_OPTIONS before the include.
   * d/control:
     - Build depend on pkgconf instead of pkg-config.
     - Bump Standards-Version from 4.5.0 to 4.7.0, no changes needed.
     - Change my email in the Uploaders field.
   * Add myself in the debian section of d/copyright.

urca (1.3-4-1) unstable; urgency=medium
 .
   * New upstream release
 .
   * debian/control: Set Build-Depends: to current R version
   * debian/control: Set Standards-Version: to current version
   * debian/control: Switch to virtual debhelper-compat (= 13)

util-linux (2.40.1-8) unstable; urgency=medium
 .
   * libpam-lastlog2: fix incorrect removal of PAM config
util-linux (2.40.1-7) unstable; urgency=medium
 .
   * Upload to unstable.
 .
   [ Samuel Thibault ]
   * Disable year2038 support on hurd-i386, fixes FTBFs (Closes: #1072472)
util-linux (2.40.1-6) experimental; urgency=medium
 .
   * Convert lintian overrides for ftp-master very old lintian

vhba-module (20240202-5) unstable; urgency=medium
 .
   * debian/appstream/net.sf.cdemu.vhba_module.metainfo.xml:
     - Revert id to previous version, because AppStream documentation and
     implementation are not on the same page. This format should work for both.
   * debian/rules:
     - Change AppStream metadata file name (underscore instead of hyphen).
vhba-module (20240202-4) unstable; urgency=medium
 .
   * debian/appstream/net.sf.cdemu.vhba-module.metainfo.xml:
     - Change id to correct format.

virtnbdbackup (2.10-1) unstable; urgency=medium
 .
   * New upstream version 2.10

vulkan-memory-allocator (3.1.0+dfsg-1) unstable; urgency=medium
 .
   * New upstream release
   * Updated gbp.conf for switch to regular releases
   * Updated d/watch to track tags instead of snapshots

wbxml2 (0.11.8+dfsg-5) unstable; urgency=medium
 .
   [ Guido Berhoerster ]
   * Add subpackage providing private symbols from the wbxml2 library.
   * Add script private symbol maintenance.