patch-2.2.14 linux/arch/s390/kernel/setup.c

• Lines: 309
• Date: Tue Jan 4 10:12:12 2000
• Orig file: v2.2.13/linux/arch/s390/kernel/setup.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.2.13/linux/arch/s390/kernel/setup.c linux/arch/s390/kernel/setup.c
@@ -0,0 +1,308 @@
+/*
+ *  arch/s390/kernel/setup.c
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "arch/i386/kernel/setup.c"
+ *    Copyright (C) 1995, Linus Torvalds
+ */
+
+/*
+ * This file handles the architecture-dependent parts of initialization
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/malloc.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#ifdef CONFIG_BLK_DEV_RAM
+#include <linux/blk.h>
+#endif
+#include <linux/console.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/smp.h>
+
+/*
+ * Machine setup..
+ */
+__u16 boot_cpu_addr;
+int cpus_initialized = 0;
+unsigned long cpu_initialized = 0;
+
+/*
+ * Setup options
+ */
+
+#ifdef CONFIG_BLK_DEV_RAM
+extern int rd_doload;                  /* 1 = load ramdisk, 0 = don't load */
+extern int rd_prompt;           /* 1 = prompt for ramdisk, 0 = don't prompt*/
+extern int rd_image_start;             /* starting block # of image        */
+#endif
+
+extern int root_mountflags;
+extern int _etext, _edata, _end;
+
+
+/*
+ * This is set up by the setup-routine at boot-time
+ * for S390 need to find out, what we have to setup
+ * using address 0x10400 ...
+ */
+
+#include <asm/setup.h>
+
+static char command_line[COMMAND_LINE_SIZE] = { 0, };
+       char saved_command_line[COMMAND_LINE_SIZE];
+
+/*
+ * cpu_init() initializes state that is per-CPU.
+ */
+void cpu_init (void)
+{
+        int nr = smp_processor_id();
+
+        if (test_and_set_bit(nr,&cpu_initialized)) {
+                printk("CPU#%d ALREADY INITIALIZED!!!!!!!!!\n", nr);
+                for (;;) __sti();
+        }
+        cpus_initialized++;
+
+        /*
+         * Store processor id in lowcore (used e.g. in timer_interrupt)
+         */
+        asm volatile ("stidp %0": "=m" (S390_lowcore.cpu_data.cpu_id));
+        S390_lowcore.cpu_data.cpu_addr = hard_smp_processor_id();
+        S390_lowcore.cpu_data.cpu_nr = nr;
+
+        /*
+         * Force FPU initialization:
+         */
+        current->flags &= ~PF_USEDFPU;
+        current->used_math = 0;
+}
+
+/*
+ * Reboot, halt and power_off routines for non SMP.
+ */
+#ifndef __SMP__
+void machine_restart(char * __unused)
+{
+        if (MACHINE_IS_VM) {
+                cpcmd("IPL", NULL, 0);
+        } else {
+                /* FIXME: how to reipl ? */
+                disabled_wait(2);
+        }
+}
+
+void machine_halt(void)
+{
+        if (MACHINE_IS_VM) {
+                cpcmd("IPL 200 STOP", NULL, 0);
+        } else {
+                disabled_wait(0);
+        }
+}
+
+void machine_power_off(void)
+{
+        if (MACHINE_IS_VM) {
+                cpcmd("IPL CMS", NULL, 0);
+        } else {
+                disabled_wait(0);
+        }
+}
+#endif
+
+/*
+ * Waits for 'delay' microseconds using the tod clock
+ */
+void tod_wait(unsigned long delay)
+{
+        uint64_t start_cc, end_cc;
+
+	if (delay == 0)
+		return;
+        asm volatile ("STCK %0" : "=m" (start_cc));
+	do {
+		asm volatile ("STCK %0" : "=m" (end_cc));
+	} while (((end_cc - start_cc)/4096) < delay);
+}
+
+/*
+ * Setup function called from init/main.c just after the banner
+ * was printed.
+ */
+__initfunc(void setup_arch(char **cmdline_p,
+        unsigned long * memory_start_p, unsigned long * memory_end_p))
+{
+        unsigned long memory_start, memory_end;
+        char c = ' ', *to = command_line, *from = COMMAND_LINE;
+        static unsigned int smptrap=0;
+        unsigned long delay = 0;
+        int len = 0;
+
+        if (smptrap)
+                return;
+        smptrap=1;
+
+        printk("Command line is: %s\n", COMMAND_LINE);
+
+        /*
+         * Setup lowcore information for boot cpu
+         */
+        cpu_init();
+        boot_cpu_addr = S390_lowcore.cpu_data.cpu_addr;
+
+        /*
+         * print what head.S has found out about the machine 
+         */
+        if (MACHINE_IS_VM)
+                printk("We are running under VM\n");
+        else
+                printk("We are running native\n");
+        if (MACHINE_HAS_IEEE)
+                printk("This machine has an IEEE fpu\n");
+        else
+                printk("This machine has no IEEE fpu\n");
+
+        ROOT_DEV = to_kdev_t(ORIG_ROOT_DEV);
+#ifdef CONFIG_BLK_DEV_RAM
+        rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
+        rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
+        rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
+#endif
+	/* nasty stuff with PARMAREAs. we use head.S or parameterline
+	  if (!MOUNT_ROOT_RDONLY)
+	  root_mountflags &= ~MS_RDONLY;
+	*/
+        memory_start = (unsigned long) &_end;    /* fixit if use $CODELO etc*/
+	memory_end = MEMORY_SIZE;
+        init_task.mm->start_code = PAGE_OFFSET;
+        init_task.mm->end_code = (unsigned long) &_etext;
+        init_task.mm->end_data = (unsigned long) &_edata;
+        init_task.mm->brk = (unsigned long) &_end;
+
+        /* Save unparsed command line copy for /proc/cmdline */
+        memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
+        saved_command_line[COMMAND_LINE_SIZE-1] = '\0';
+
+        for (;;) {
+                /*
+                 * "mem=XXX[kKmM]" sets memsize != 32M
+                 * memory size
+                 */
+                if (c == ' ' && strncmp(from, "mem=", 4) == 0) {
+                        if (to != command_line) to--;
+                        memory_end = simple_strtoul(from+4, &from, 0);
+                        if ( *from == 'K' || *from == 'k' ) {
+                                memory_end = memory_end << 10;
+                                from++;
+                        } else if ( *from == 'M' || *from == 'm' ) {
+                                memory_end = memory_end << 20;
+                                from++;
+                        }
+                }
+                if (c == ' ' && strncmp(from, "ipldelay=", 9) == 0) {
+			if (to != command_line) to--;
+                        delay = simple_strtoul(from+9, &from, 0);
+			if (*from == 's' || *from == 'S') {
+				delay = delay*1000000;
+				from++;
+			} else if (*from == 'm' || *from == 'M') {
+				delay = delay*60*1000000;
+				from++;
+			}
+			tod_wait(delay);
+                }
+                c = *(from++);
+                if (!c)
+                        break;
+                if (COMMAND_LINE_SIZE <= ++len)
+                        break;
+                *(to++) = c;
+        }
+        *to = '\0';
+        *cmdline_p = command_line;
+        memory_end += PAGE_OFFSET;
+        *memory_start_p = memory_start;
+        *memory_end_p = memory_end;
+
+#ifdef CONFIG_BLK_DEV_INITRD
+        initrd_start = INITRD_START;
+        if (initrd_start) {
+                initrd_end = initrd_start+INITRD_SIZE;
+                printk("Initial ramdisk at: 0x%p (%lu bytes)\n",
+                       (void *) initrd_start, INITRD_SIZE);
+                initrd_below_start_ok = 1;
+                if (initrd_end > *memory_end_p) {
+                        printk("initrd extends beyond end of memory "
+                               "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
+                               initrd_end, (unsigned long) memory_end_p);
+                        initrd_start = initrd_end = 0;
+                }
+        }
+#endif
+
+}
+
+void print_cpu_info(struct cpuinfo_S390 *cpuinfo)
+{
+   printk("cpu %d "
+#ifdef __SMP__
+           "phys_idx=%d "
+#endif
+           "vers=%02X ident=%06X machine=%04X unused=%04X\n",
+           cpuinfo->cpu_nr,
+#ifdef __SMP__
+           cpuinfo->cpu_addr,
+#endif
+           cpuinfo->cpu_id.version,
+           cpuinfo->cpu_id.ident,
+           cpuinfo->cpu_id.machine,
+           cpuinfo->cpu_id.unused);
+}
+
+/*
+ *	Get CPU information for use by the procfs.
+ */
+
+int get_cpuinfo(char * buffer)
+{
+        struct cpuinfo_S390 *cpuinfo;
+        char *p = buffer;
+        int i;
+
+        p += sprintf(p,"vendor_id       : IBM/S390\n"
+                       "# processors    : %i\n"
+                       "bogomips per cpu: %lu.%02lu\n",
+                       smp_num_cpus, loops_per_sec/500000,
+                       (loops_per_sec/5000)%100);
+        for (i = 0; i < smp_num_cpus; i++) {
+                cpuinfo = &safe_get_cpu_lowcore(i).cpu_data;
+                p += sprintf(p,"processor %i: "
+                               "version = %02X,  "
+                               "identification = %06X,  "
+                               "machine = %04X\n",
+                               i, cpuinfo->cpu_id.version,
+                               cpuinfo->cpu_id.ident,
+                               cpuinfo->cpu_id.machine);
+        }
+        return p - buffer;
+}
+