patch-2.2.14 linux/drivers/char/moxa.c

Next file: linux/drivers/char/msbusmouse.c
Previous file: linux/drivers/char/mixcomwd.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.2.13/linux/drivers/char/moxa.c linux/drivers/char/moxa.c
@@ -0,0 +1,3319 @@
+/*****************************************************************************/
+/*
+ *           moxa.c  -- MOXA Intellio family multiport serial driver.
+ *
+ *      Copyright (C) 1999-2000  Moxa Technologies (support@moxa.com.tw).
+ *
+ *      This code is loosely based on the Linux serial driver, written by
+ *      Linus Torvalds, Theodore T'so and others.
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ *    MOXA Intellio Series Driver
+ *      for             : LINUX
+ *      date            : 1999/1/7
+ *      version         : 5.1
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/config.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/serial.h>
+#include <linux/tty_driver.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/segment.h>
+#include <asm/bitops.h>
+#include <asm/uaccess.h>
+
+#define		MOXA_VERSION		"5.1k"
+
+#define MOXAMAJOR       172
+#define MOXACUMAJOR     173
+
+#define put_to_user(arg1, arg2) put_user(arg1, (unsigned long *)arg2)
+#define get_from_user(arg1, arg2) get_user(arg1, (unsigned int *)arg2)
+
+#define MAX_BOARDS 		4	/* Don't change this value */
+#define MAX_PORTS_PER_BOARD	32	/* Don't change this value */
+#define MAX_PORTS 		128	/* Don't change this value */
+
+/*
+ *    Define the Moxa PCI vendor and device IDs.
+ */
+#define MOXA_BUS_TYPE_ISA		0
+#define MOXA_BUS_TYPE_PCI		1
+
+#ifndef	PCI_VENDOR_ID_MOXA
+#define	PCI_VENDOR_ID_MOXA	0x1393
+#endif
+#ifndef PCI_DEVICE_ID_CP204J
+#define PCI_DEVICE_ID_CP204J	0x2040
+#endif
+#ifndef PCI_DEVICE_ID_C218
+#define PCI_DEVICE_ID_C218	0x2180
+#endif
+#ifndef PCI_DEVICE_ID_C320
+#define PCI_DEVICE_ID_C320	0x3200
+#endif
+
+enum {
+	MOXA_BOARD_C218_PCI = 1,
+	MOXA_BOARD_C218_ISA,
+	MOXA_BOARD_C320_PCI,
+	MOXA_BOARD_C320_ISA,
+	MOXA_BOARD_CP204J,
+};
+
+static char *moxa_brdname[] =
+{
+	"C218 Turbo PCI series",
+	"C218 Turbo ISA series",
+	"C320 Turbo PCI series",
+	"C320 Turbo ISA series",
+	"CP-204J series",
+};
+
+typedef struct {
+	unsigned short vendor_id;
+	unsigned short device_id;
+	unsigned short board_type;
+} moxa_pciinfo;
+
+static moxa_pciinfo moxa_pcibrds[] =
+{
+	{PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_C218, MOXA_BOARD_C218_PCI},
+	{PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_C320, MOXA_BOARD_C320_PCI},
+	{PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_CP204J, MOXA_BOARD_CP204J},
+};
+
+typedef struct _moxa_isa_board_conf {
+	int boardType;
+	int numPorts;
+	unsigned long baseAddr;
+} moxa_isa_board_conf;
+
+static moxa_isa_board_conf moxa_isa_boards[] =
+{
+/*       {MOXA_BOARD_C218_ISA,8,0xDC000}, */
+};
+
+typedef struct _moxa_pci_devinfo {
+	ushort busNum;
+	ushort devNum;
+} moxa_pci_devinfo;
+
+typedef struct _moxa_board_conf {
+	int boardType;
+	int numPorts;
+	unsigned long baseAddr;
+	int busType;
+	moxa_pci_devinfo pciInfo;
+} moxa_board_conf;
+
+static moxa_board_conf moxa_boards[MAX_BOARDS];
+static unsigned long moxaBaseAddr[MAX_BOARDS];
+
+struct moxa_str {
+	int type;
+	int port;
+	int close_delay;
+	unsigned short closing_wait;
+	int count;
+	int blocked_open;
+	int event;
+	int asyncflags;
+	long session;
+	long pgrp;
+	unsigned long statusflags;
+	struct tty_struct *tty;
+	struct termios normal_termios;
+	struct termios callout_termios;
+	struct wait_queue *open_wait;
+	struct wait_queue *close_wait;
+	struct tq_struct tqueue;
+};
+
+struct mxser_mstatus {
+	tcflag_t cflag;
+	int cts;
+	int dsr;
+	int ri;
+	int dcd;
+};
+
+static struct mxser_mstatus GMStatus[MAX_PORTS];
+
+/* statusflags */
+#define TXSTOPPED	0x1
+#define LOWWAIT 	0x2
+#define EMPTYWAIT	0x4
+#define THROTTLE	0x8
+
+/* event */
+#define MOXA_EVENT_HANGUP	1
+
+#define SERIAL_DO_RESTART
+
+
+#define SERIAL_TYPE_NORMAL	1
+#define SERIAL_TYPE_CALLOUT	2
+
+#define WAKEUP_CHARS		256
+
+#define PORTNO(x)		(MINOR((x)->device) - (x)->driver.minor_start)
+
+static int verbose = 0;
+static int ttymajor = MOXAMAJOR;
+static int calloutmajor = MOXACUMAJOR;
+#ifdef MODULE
+/* Variables for insmod */
+static int baseaddr[] 	= 	{0, 0, 0, 0};
+static int type[]	=	{0, 0, 0, 0};
+static int numports[] 	=	{0, 0, 0, 0};
+
+MODULE_AUTHOR("William Chen");
+MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
+MODULE_PARM(type, "1-4i");
+MODULE_PARM(baseaddr, "1-4i");
+MODULE_PARM(numports, "1-4i");
+MODULE_PARM(ttymajor, "i");
+MODULE_PARM(calloutmajor, "i");
+MODULE_PARM(verbose, "i");
+
+#endif				//MODULE
+
+static struct tty_driver moxaDriver;
+static struct tty_driver moxaCallout;
+static struct tty_struct *moxaTable[MAX_PORTS + 1];
+static struct termios *moxaTermios[MAX_PORTS + 1];
+static struct termios *moxaTermiosLocked[MAX_PORTS + 1];
+static struct moxa_str moxaChannels[MAX_PORTS];
+static int moxaRefcount;
+unsigned char *moxaXmitBuff;
+static int moxaTimer_on;
+struct timer_list moxaTimer;
+static int moxaEmptyTimer_on[MAX_PORTS];
+struct timer_list moxaEmptyTimer[MAX_PORTS];
+struct semaphore moxaBuffSem = MUTEX;
+
+int moxa_init(void);
+#ifdef MODULE
+int init_module(void);
+void cleanup_module(void);
+#endif
+/*
+ * static functions:
+ */
+static int moxa_get_PCI_conf(struct pci_dev *, int, moxa_board_conf *);
+static void do_moxa_softint(void *);
+static int moxa_open(struct tty_struct *, struct file *);
+static void moxa_close(struct tty_struct *, struct file *);
+static int moxa_write(struct tty_struct *, int, const unsigned char *, int);
+static int moxa_write_room(struct tty_struct *);
+static void moxa_flush_buffer(struct tty_struct *);
+static int moxa_chars_in_buffer(struct tty_struct *);
+static void moxa_flush_chars(struct tty_struct *);
+static void moxa_put_char(struct tty_struct *, unsigned char);
+static int moxa_ioctl(struct tty_struct *, struct file *, unsigned int, unsigned long);
+static void moxa_throttle(struct tty_struct *);
+static void moxa_unthrottle(struct tty_struct *);
+static void moxa_set_termios(struct tty_struct *, struct termios *);
+static void moxa_stop(struct tty_struct *);
+static void moxa_start(struct tty_struct *);
+static void moxa_hangup(struct tty_struct *);
+static void moxa_poll(unsigned long);
+static void set_tty_param(struct tty_struct *);
+static int block_till_ready(struct tty_struct *, struct file *,
+			    struct moxa_str *);
+static void setup_empty_event(struct tty_struct *);
+static void check_xmit_empty(unsigned long);
+static void shut_down(struct moxa_str *);
+static void receive_data(struct moxa_str *);
+/*
+ * moxa board interface functions:
+ */
+static void MoxaDriverInit(void);
+static int MoxaDriverIoctl(unsigned int, unsigned long, int);
+static int MoxaDriverPoll(void);
+static int MoxaPortsOfCard(int);
+static int MoxaPortIsValid(int);
+static void MoxaPortEnable(int);
+static void MoxaPortDisable(int);
+static long MoxaPortGetMaxBaud(int);
+static long MoxaPortSetBaud(int, long);
+static int MoxaPortSetTermio(int, struct termios *);
+static int MoxaPortGetLineOut(int, int *, int *);
+static void MoxaPortLineCtrl(int, int, int);
+static void MoxaPortFlowCtrl(int, int, int, int, int, int);
+static int MoxaPortLineStatus(int);
+static int MoxaPortDCDChange(int);
+static int MoxaPortDCDON(int);
+static void MoxaPortFlushData(int, int);
+static int MoxaPortWriteData(int, unsigned char *, int);
+static int MoxaPortReadData(int, unsigned char *, int);
+static int MoxaPortTxQueue(int);
+static int MoxaPortRxQueue(int);
+static int MoxaPortTxFree(int);
+static void MoxaPortTxDisable(int);
+static void MoxaPortTxEnable(int);
+static int MoxaPortResetBrkCnt(int);
+static void MoxaPortSendBreak(int, int);
+static int moxa_get_serial_info(struct moxa_str *, struct serial_struct *);
+static int moxa_set_serial_info(struct moxa_str *, struct serial_struct *);
+static void MoxaSetFifo(int port, int enable);
+
+#ifdef MODULE
+int init_module(void)
+{
+	int ret;
+
+	if (verbose)
+		printk("Loading module moxa ...\n");
+	ret = moxa_init();
+	if (verbose)
+		printk("Done\n");
+	return (ret);
+}
+
+void cleanup_module(void)
+{
+	int i;
+
+	if (verbose)
+		printk("Unloading module moxa ...\n");
+
+	if (moxaTimer_on)
+		del_timer(&moxaTimer);
+
+	for (i = 0; i < MAX_PORTS; i++)
+		if (moxaEmptyTimer_on[i])
+			del_timer(&moxaEmptyTimer[i]);
+
+	if (tty_unregister_driver(&moxaCallout))
+		printk("Couldn't unregister MOXA Intellio family callout driver\n");
+	if (tty_unregister_driver(&moxaDriver))
+		printk("Couldn't unregister MOXA Intellio family serial driver\n");
+	if (verbose)
+		printk("Done\n");
+
+}
+#endif
+
+int moxa_init(void)
+{
+	int i, n, numBoards;
+	struct moxa_str *ch;
+	int ret1, ret2;
+
+	printk(KERN_INFO "MOXA Intellio family driver version %s\n", MOXA_VERSION);
+
+	memset(&moxaDriver, 0, sizeof(struct tty_driver));
+	memset(&moxaCallout, 0, sizeof(struct tty_driver));
+	moxaDriver.magic = TTY_DRIVER_MAGIC;
+	moxaDriver.name = "ttya";
+	moxaDriver.major = ttymajor;
+	moxaDriver.minor_start = 0;
+	moxaDriver.num = MAX_PORTS + 1;
+	moxaDriver.type = TTY_DRIVER_TYPE_SERIAL;
+	moxaDriver.subtype = SERIAL_TYPE_NORMAL;
+	moxaDriver.init_termios = tty_std_termios;
+	moxaDriver.init_termios.c_iflag = 0;
+	moxaDriver.init_termios.c_oflag = 0;
+	moxaDriver.init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
+	moxaDriver.init_termios.c_lflag = 0;
+	moxaDriver.flags = TTY_DRIVER_REAL_RAW;
+	moxaDriver.refcount = &moxaRefcount;
+	moxaDriver.table = moxaTable;
+	moxaDriver.termios = moxaTermios;
+	moxaDriver.termios_locked = moxaTermiosLocked;
+
+	moxaDriver.open = moxa_open;
+	moxaDriver.close = moxa_close;
+	moxaDriver.write = moxa_write;
+	moxaDriver.write_room = moxa_write_room;
+	moxaDriver.flush_buffer = moxa_flush_buffer;
+	moxaDriver.chars_in_buffer = moxa_chars_in_buffer;
+	moxaDriver.flush_chars = moxa_flush_chars;
+	moxaDriver.put_char = moxa_put_char;
+	moxaDriver.ioctl = moxa_ioctl;
+	moxaDriver.throttle = moxa_throttle;
+	moxaDriver.unthrottle = moxa_unthrottle;
+	moxaDriver.set_termios = moxa_set_termios;
+	moxaDriver.stop = moxa_stop;
+	moxaDriver.start = moxa_start;
+	moxaDriver.hangup = moxa_hangup;
+
+	moxaCallout = moxaDriver;
+	moxaCallout.name = "ttyA";
+	moxaCallout.major = calloutmajor;
+	moxaCallout.subtype = SERIAL_TYPE_CALLOUT;
+
+	moxaXmitBuff = 0;
+
+	for (i = 0, ch = moxaChannels; i < MAX_PORTS; i++, ch++) {
+		ch->type = PORT_16550A;
+		ch->port = i;
+		ch->tqueue.routine = do_moxa_softint;
+		ch->tqueue.data = ch;
+		ch->tty = 0;
+		ch->close_delay = 5 * HZ / 10;
+		ch->closing_wait = 30 * HZ;
+		ch->count = 0;
+		ch->blocked_open = 0;
+		ch->callout_termios = moxaCallout.init_termios;
+		ch->normal_termios = moxaDriver.init_termios;
+		ch->open_wait = 0;
+		ch->close_wait = 0;
+	}
+
+	for (i = 0; i < MAX_BOARDS; i++) {
+		moxa_boards[i].boardType = 0;
+		moxa_boards[i].numPorts = 0;
+		moxa_boards[i].baseAddr = 0;
+		moxa_boards[i].busType = 0;
+		moxa_boards[i].pciInfo.busNum = 0;
+		moxa_boards[i].pciInfo.devNum = 0;
+	}
+	MoxaDriverInit();
+	printk("Tty devices major number = %d, callout devices major number = %d\n", ttymajor, calloutmajor);
+
+	ret1 = 0;
+	ret2 = 0;
+	if ((ret1 = tty_register_driver(&moxaDriver))) {
+		printk(KERN_ERR "Couldn't install MOXA Smartio family driver !\n");
+	} else if ((ret2 = tty_register_driver(&moxaCallout))) {
+		tty_unregister_driver(&moxaDriver);
+		printk(KERN_ERR "Couldn't install MOXA Smartio family callout driver !\n");
+	}
+	if (ret1 || ret2) {
+		return -1;
+	}
+	for (i = 0; i < MAX_PORTS; i++) {
+		init_timer(&moxaEmptyTimer[i]);
+		moxaEmptyTimer[i].function = check_xmit_empty;
+		moxaEmptyTimer[i].data = (unsigned long) & moxaChannels[i];
+		moxaEmptyTimer_on[i] = 0;
+	}
+
+	init_timer(&moxaTimer);
+	moxaTimer.function = moxa_poll;
+	moxaTimer.expires = jiffies + (HZ / 50);
+	moxaTimer_on = 1;
+	add_timer(&moxaTimer);
+
+	/* Find the boards defined in source code */
+	numBoards = 0;
+	for (i = 0; i < MAX_BOARDS; i++) {
+		if ((moxa_isa_boards[i].boardType == MOXA_BOARD_C218_ISA) ||
+		 (moxa_isa_boards[i].boardType == MOXA_BOARD_C320_ISA)) {
+			moxa_boards[numBoards].boardType = moxa_isa_boards[i].boardType;
+			if (moxa_isa_boards[i].boardType == MOXA_BOARD_C218_ISA)
+				moxa_boards[numBoards].numPorts = 8;
+			else
+				moxa_boards[numBoards].numPorts = moxa_isa_boards[i].numPorts;
+			moxa_boards[numBoards].busType = MOXA_BUS_TYPE_ISA;
+			moxa_boards[numBoards].baseAddr = moxa_isa_boards[i].baseAddr;
+			if (verbose)
+				printk("Board %2d: %s board(baseAddr=%lx)\n",
+				       numBoards + 1,
+				       moxa_brdname[moxa_boards[numBoards].boardType - 1],
+				       moxa_boards[numBoards].baseAddr);
+			numBoards++;
+		}
+	}
+	/* Find the boards defined form module args. */
+#ifdef MODULE
+	for (i = 0; i < MAX_BOARDS; i++) {
+		if ((type[i] == MOXA_BOARD_C218_ISA) ||
+		    (type[i] == MOXA_BOARD_C320_ISA)) {
+			if (verbose)
+				printk("Board %2d: %s board(baseAddr=%lx)\n",
+				       numBoards + 1,
+				       moxa_brdname[type[i] - 1],
+				       (unsigned long) baseaddr[i]);
+			if (numBoards >= MAX_BOARDS) {
+				if (verbose)
+					printk("More than %d MOXA Intellio family boards found. Board is ignored.", MAX_BOARDS);
+				continue;
+			}
+			moxa_boards[numBoards].boardType = type[i];
+			if (moxa_isa_boards[i].boardType == MOXA_BOARD_C218_ISA)
+				moxa_boards[numBoards].numPorts = 8;
+			else
+				moxa_boards[numBoards].numPorts = numports[i];
+			moxa_boards[numBoards].busType = MOXA_BUS_TYPE_ISA;
+			moxa_boards[numBoards].baseAddr = baseaddr[i];
+			numBoards++;
+		}
+	}
+#endif
+	/* Find PCI boards here */
+#ifdef CONFIG_PCI
+	if (pci_present()) {
+		struct pci_dev *p = NULL;
+		n = sizeof(moxa_pcibrds) / sizeof(moxa_pciinfo);
+		i = 0;
+		while (i < n) {
+			while((p = pci_find_device(moxa_pcibrds[i].vendor_id, moxa_pcibrds[i].device_id, p))!=NULL)
+			{
+				if (numBoards >= MAX_BOARDS) {
+					if (verbose)
+						printk("More than %d MOXA Intellio family boards found. Board is ignored.", MAX_BOARDS);
+				} else {
+					moxa_get_PCI_conf(p, moxa_pcibrds[i].board_type,
+						&moxa_boards[numBoards]);
+					numBoards++;
+				}
+			}
+			i++;
+		}
+	}
+#endif
+	for (i = 0; i < numBoards; i++) {
+		moxaBaseAddr[i] = (unsigned long) ioremap((unsigned long) moxa_boards[i].baseAddr, 0x4000);
+	}
+
+	return (0);
+}
+
+static int moxa_get_PCI_conf(struct pci_dev *p, int board_type, moxa_board_conf * board)
+{
+	unsigned int val;
+
+	board->baseAddr = p->base_address[2] & PCI_BASE_ADDRESS_MEM_MASK;
+	board->boardType = board_type;
+	switch (board_type) {
+	case MOXA_BOARD_C218_ISA:
+	case MOXA_BOARD_C218_PCI:
+		board->numPorts = 8;
+		break;
+
+	case MOXA_BOARD_CP204J:
+		board->numPorts = 4;
+		break;
+	default:
+		board->numPorts = 0;
+		break;
+	}
+	board->busType = MOXA_BUS_TYPE_PCI;
+	board->pciInfo.busNum = p->bus->number;
+	board->pciInfo.devNum = p->devfn >> 3;
+
+	return (0);
+}
+
+static void do_moxa_softint(void *private_)
+{
+	struct moxa_str *ch = (struct moxa_str *) private_;
+	struct tty_struct *tty;
+
+	if (!ch || !(tty = ch->tty))
+		return;
+	if (test_and_clear_bit(MOXA_EVENT_HANGUP, &ch->event)) {
+		tty_hangup(tty);
+		wake_up_interruptible(&ch->open_wait);
+		ch->asyncflags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CALLOUT_ACTIVE);
+	}
+}
+
+static int moxa_open(struct tty_struct *tty, struct file *filp)
+{
+	struct moxa_str *ch;
+	int port;
+	int retval;
+	unsigned long page;
+
+	port = PORTNO(tty);
+	if (port == MAX_PORTS) {
+		MOD_INC_USE_COUNT;
+		return (0);
+	}
+	if (!MoxaPortIsValid(port)) {
+		tty->driver_data = NULL;
+		return (-ENODEV);
+	}
+	down(&moxaBuffSem);
+	if (!moxaXmitBuff) {
+		page = get_free_page(GFP_KERNEL);
+		if (!page) {
+			up(&moxaBuffSem);
+			return (-ENOMEM);
+		}
+		if (moxaXmitBuff)
+			free_page(page);
+		else
+			moxaXmitBuff = (unsigned char *) page;
+	}
+	up(&moxaBuffSem);
+
+	MOD_INC_USE_COUNT;
+	ch = &moxaChannels[port];
+	ch->count++;
+	tty->driver_data = ch;
+	ch->tty = tty;
+	if (ch->count == 1 && (ch->asyncflags & ASYNC_SPLIT_TERMIOS)) {
+		if (tty->driver.subtype == SERIAL_TYPE_NORMAL)
+			*tty->termios = ch->normal_termios;
+		else
+			*tty->termios = ch->callout_termios;
+	}
+	ch->session = current->session;
+	ch->pgrp = current->pgrp;
+	if (!(ch->asyncflags & ASYNC_INITIALIZED)) {
+		ch->statusflags = 0;
+		set_tty_param(tty);
+		MoxaPortLineCtrl(ch->port, 1, 1);
+		MoxaPortEnable(ch->port);
+		ch->asyncflags |= ASYNC_INITIALIZED;
+	}
+	retval = block_till_ready(tty, filp, ch);
+
+	moxa_unthrottle(tty);
+
+	if (ch->type == PORT_16550A) {
+		MoxaSetFifo(ch->port, 1);
+	} else {
+		MoxaSetFifo(ch->port, 0);
+	}
+
+	return (retval);
+}
+
+static void moxa_close(struct tty_struct *tty, struct file *filp)
+{
+	struct moxa_str *ch;
+	int port;
+
+	port = PORTNO(tty);
+	if (port == MAX_PORTS) {
+		MOD_DEC_USE_COUNT;
+		return;
+	}
+	if (!MoxaPortIsValid(port)) {
+#ifdef SERIAL_DEBUG_CLOSE
+		printk("Invalid portno in moxa_close\n");
+#endif
+		tty->driver_data = NULL;
+		return;
+	}
+	if (tty->driver_data == NULL) {
+		return;
+	}
+	if (tty_hung_up_p(filp)) {
+		MOD_DEC_USE_COUNT;
+		return;
+	}
+	ch = (struct moxa_str *) tty->driver_data;
+
+	if ((tty->count == 1) && (ch->count != 1)) {
+		printk("moxa_close: bad serial port count; tty->count is 1, "
+		       "ch->count is %d\n", ch->count);
+		ch->count = 1;
+	}
+	if (--ch->count < 0) {
+		printk("moxa_close: bad serial port count, minor=%d\n",
+		       MINOR(tty->device));
+		ch->count = 0;
+	}
+	if (ch->count) {
+		MOD_DEC_USE_COUNT;
+		return;
+	}
+	ch->asyncflags |= ASYNC_CLOSING;
+
+	/*
+	 * Save the termios structure, since this port may have
+	 * separate termios for callout and dialin.
+	 */
+	if (ch->asyncflags & ASYNC_NORMAL_ACTIVE)
+		ch->normal_termios = *tty->termios;
+	if (ch->asyncflags & ASYNC_CALLOUT_ACTIVE)
+		ch->callout_termios = *tty->termios;
+	if (ch->asyncflags & ASYNC_INITIALIZED) {
+		setup_empty_event(tty);
+		tty_wait_until_sent(tty, 30 * HZ);	/* 30 seconds timeout */
+		moxaEmptyTimer_on[ch->port] = 0;
+		del_timer(&moxaEmptyTimer[ch->port]);
+	}
+	shut_down(ch);
+	MoxaPortFlushData(port, 2);
+
+	if (tty->driver.flush_buffer)
+		tty->driver.flush_buffer(tty);
+	if (tty->ldisc.flush_buffer)
+		tty->ldisc.flush_buffer(tty);
+	tty->closing = 0;
+	ch->event = 0;
+	ch->tty = 0;
+	if (ch->blocked_open) {
+		if (ch->close_delay) {
+			current->state = TASK_INTERRUPTIBLE;
+			schedule_timeout(ch->close_delay);
+		}
+		wake_up_interruptible(&ch->open_wait);
+	}
+	ch->asyncflags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CALLOUT_ACTIVE |
+			    ASYNC_CLOSING);
+	wake_up_interruptible(&ch->close_wait);
+	MOD_DEC_USE_COUNT;
+}
+
+static int moxa_write(struct tty_struct *tty, int from_user,
+		      const unsigned char *buf, int count)
+{
+	struct moxa_str *ch;
+	int len, port;
+	unsigned long flags;
+	unsigned char *temp;
+
+	ch = (struct moxa_str *) tty->driver_data;
+	if (ch == NULL)
+		return (0);
+	port = ch->port;
+	save_flags(flags);
+	cli();
+	if (from_user) {
+		copy_from_user(moxaXmitBuff, buf, count);
+		temp = moxaXmitBuff;
+	} else
+		temp = (unsigned char *) buf;
+	len = MoxaPortWriteData(port, temp, count);
+	restore_flags(flags);
+	/*********************************************
+	if ( !(ch->statusflags & LOWWAIT) &&
+	     ((len != count) || (MoxaPortTxFree(port) <= 100)) )
+	************************************************/
+	ch->statusflags |= LOWWAIT;
+	return (len);
+}
+
+static int moxa_write_room(struct tty_struct *tty)
+{
+	struct moxa_str *ch;
+
+	if (tty->stopped)
+		return (0);
+	ch = (struct moxa_str *) tty->driver_data;
+	if (ch == NULL)
+		return (0);
+	return (MoxaPortTxFree(ch->port));
+}
+
+static void moxa_flush_buffer(struct tty_struct *tty)
+{
+	struct moxa_str *ch = (struct moxa_str *) tty->driver_data;
+
+	if (ch == NULL)
+		return;
+	MoxaPortFlushData(ch->port, 1);
+	if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
+	    tty->ldisc.write_wakeup)
+		(tty->ldisc.write_wakeup) (tty);
+	wake_up_interruptible(&tty->write_wait);
+}
+
+static int moxa_chars_in_buffer(struct tty_struct *tty)
+{
+	int chars;
+	struct moxa_str *ch = (struct moxa_str *) tty->driver_data;
+
+	/*
+	 * Sigh...I have to check if driver_data is NULL here, because
+	 * if an open() fails, the TTY subsystem eventually calls
+	 * tty_wait_until_sent(), which calls the driver's chars_in_buffer()
+	 * routine.  And since the open() failed, we return 0 here.  TDJ
+	 */
+	if (ch == NULL)
+		return (0);
+	chars = MoxaPortTxQueue(ch->port);
+	if (chars) {
+		/*
+		 * Make it possible to wakeup anything waiting for output
+		 * in tty_ioctl.c, etc.
+		 */
+		if (!(ch->statusflags & EMPTYWAIT))
+			setup_empty_event(tty);
+	}
+	return (chars);
+}
+
+static void moxa_flush_chars(struct tty_struct *tty)
+{
+	/*
+	 * Don't think I need this, because this is called to empty the TX
+	 * buffer for the 16450, 16550, etc.
+	 */
+}
+
+static void moxa_put_char(struct tty_struct *tty, unsigned char c)
+{
+	struct moxa_str *ch;
+	int port;
+	unsigned long flags;
+
+	ch = (struct moxa_str *) tty->driver_data;
+	if (ch == NULL)
+		return;
+	port = ch->port;
+	save_flags(flags);
+	cli();
+	moxaXmitBuff[0] = c;
+	MoxaPortWriteData(port, moxaXmitBuff, 1);
+	restore_flags(flags);
+	/************************************************
+	if ( !(ch->statusflags & LOWWAIT) && (MoxaPortTxFree(port) <= 100) )
+	*************************************************/
+	ch->statusflags |= LOWWAIT;
+}
+
+static int moxa_ioctl(struct tty_struct *tty, struct file *file,
+		      unsigned int cmd, unsigned long arg)
+{
+	struct moxa_str *ch = (struct moxa_str *) tty->driver_data;
+	register int port;
+	int retval, dtr, rts;
+	unsigned long flag;
+
+	port = PORTNO(tty);
+	if ((port != MAX_PORTS) && (!ch))
+		return (-EINVAL);
+
+	switch (cmd) {
+	case TCSBRK:		/* SVID version: non-zero arg --> no break */
+		retval = tty_check_change(tty);
+		if (retval)
+			return (retval);
+		setup_empty_event(tty);
+		tty_wait_until_sent(tty, 0);
+		if (!arg)
+			MoxaPortSendBreak(ch->port, 0);
+		return (0);
+	case TCSBRKP:		/* support for POSIX tcsendbreak() */
+		retval = tty_check_change(tty);
+		if (retval)
+			return (retval);
+		setup_empty_event(tty);
+		tty_wait_until_sent(tty, 0);
+		MoxaPortSendBreak(ch->port, arg);
+		return (0);
+	case TIOCGSOFTCAR:
+		return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long *) arg);
+	case TIOCSSOFTCAR:
+		if(get_user(retval, (unsigned long *) arg))
+			return -EFAULT;
+		arg = retval;
+		tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) |
+					 (arg ? CLOCAL : 0));
+		if (C_CLOCAL(tty))
+			ch->asyncflags &= ~ASYNC_CHECK_CD;
+		else
+			ch->asyncflags |= ASYNC_CHECK_CD;
+		return (0);
+	case TIOCMGET:
+		flag = 0;
+		MoxaPortGetLineOut(ch->port, &dtr, &rts);
+		if (dtr)
+			flag |= TIOCM_DTR;
+		if (rts)
+			flag |= TIOCM_RTS;
+		dtr = MoxaPortLineStatus(ch->port);
+		if (dtr & 1)
+			flag |= TIOCM_CTS;
+		if (dtr & 2)
+			flag |= TIOCM_DSR;
+		if (dtr & 4)
+			flag |= TIOCM_CD;
+		return put_user(flag, (unsigned int *) arg);
+	case TIOCMBIS:
+		if(get_user(retval, (unsigned int *) arg))
+			return -EFAULT;
+		MoxaPortGetLineOut(ch->port, &dtr, &rts);
+		if (retval & TIOCM_RTS)
+			rts = 1;
+		if (retval & TIOCM_DTR)
+			dtr = 1;
+		MoxaPortLineCtrl(ch->port, dtr, rts);
+		return (0);
+	case TIOCMBIC:
+		if(get_user(retval, (unsigned int *) arg))
+			return -EFAULT;
+		MoxaPortGetLineOut(ch->port, &dtr, &rts);
+		if (retval & TIOCM_RTS)
+			rts = 0;
+		if (retval & TIOCM_DTR)
+			dtr = 0;
+		MoxaPortLineCtrl(ch->port, dtr, rts);
+		return (0);
+	case TIOCMSET:
+		if(get_user(retval, (unsigned long *) arg))
+			return -EFAULT;
+		dtr = rts = 0;
+		if (retval & TIOCM_RTS)
+			rts = 1;
+		if (retval & TIOCM_DTR)
+			dtr = 1;
+		MoxaPortLineCtrl(ch->port, dtr, rts);
+		return (0);
+	case TIOCGSERIAL:
+		return (moxa_get_serial_info(ch, (struct serial_struct *) arg));
+
+	case TIOCSSERIAL:
+		return (moxa_set_serial_info(ch, (struct serial_struct *) arg));
+	default:
+		retval = MoxaDriverIoctl(cmd, arg, port);
+	}
+	return (retval);
+}
+
+static void moxa_throttle(struct tty_struct *tty)
+{
+	struct moxa_str *ch = (struct moxa_str *) tty->driver_data;
+
+	ch->statusflags |= THROTTLE;
+}
+
+static void moxa_unthrottle(struct tty_struct *tty)
+{
+	struct moxa_str *ch = (struct moxa_str *) tty->driver_data;
+
+	ch->statusflags &= ~THROTTLE;
+}
+
+static void moxa_set_termios(struct tty_struct *tty,
+			     struct termios *old_termios)
+{
+	struct moxa_str *ch = (struct moxa_str *) tty->driver_data;
+
+	if (ch == NULL)
+		return;
+	set_tty_param(tty);
+	if (!(old_termios->c_cflag & CLOCAL) &&
+	    (tty->termios->c_cflag & CLOCAL))
+		wake_up_interruptible(&ch->open_wait);
+}
+
+static void moxa_stop(struct tty_struct *tty)
+{
+	struct moxa_str *ch = (struct moxa_str *) tty->driver_data;
+
+	if (ch == NULL)
+		return;
+	MoxaPortTxDisable(ch->port);
+	ch->statusflags |= TXSTOPPED;
+}
+
+
+static void moxa_start(struct tty_struct *tty)
+{
+	struct moxa_str *ch = (struct moxa_str *) tty->driver_data;
+
+	if (ch == NULL)
+		return;
+
+	if (!(ch->statusflags & TXSTOPPED))
+		return;
+
+	MoxaPortTxEnable(ch->port);
+	ch->statusflags &= ~TXSTOPPED;
+}
+
+static void moxa_hangup(struct tty_struct *tty)
+{
+	struct moxa_str *ch = (struct moxa_str *) tty->driver_data;
+
+	moxa_flush_buffer(tty);
+	shut_down(ch);
+	ch->event = 0;
+	ch->count = 0;
+	ch->asyncflags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CALLOUT_ACTIVE);
+	ch->tty = 0;
+	wake_up_interruptible(&ch->open_wait);
+}
+
+static void moxa_poll(unsigned long ignored)
+{
+	register int card;
+	struct moxa_str *ch;
+	struct tty_struct *tp;
+	int i, ports;
+
+	moxaTimer_on = 0;
+	del_timer(&moxaTimer);
+
+	if (MoxaDriverPoll() < 0) {
+		moxaTimer.function = moxa_poll;
+		moxaTimer.expires = jiffies + (HZ / 50);
+		moxaTimer_on = 1;
+		add_timer(&moxaTimer);
+		return;
+	}
+	for (card = 0; card < MAX_BOARDS; card++) {
+		if ((ports = MoxaPortsOfCard(card)) <= 0)
+			continue;
+		ch = &moxaChannels[card * MAX_PORTS_PER_BOARD];
+		for (i = 0; i < ports; i++, ch++) {
+			if ((ch->asyncflags & ASYNC_INITIALIZED) == 0)
+				continue;
+			if (!(ch->statusflags & THROTTLE) &&
+			    (MoxaPortRxQueue(ch->port) > 0))
+				receive_data(ch);
+			if ((tp = ch->tty) == 0)
+				continue;
+			if (ch->statusflags & LOWWAIT) {
+				if (MoxaPortTxQueue(ch->port) <= WAKEUP_CHARS) {
+					if (!tp->stopped) {
+						ch->statusflags &= ~LOWWAIT;
+						if ((tp->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
+						  tp->ldisc.write_wakeup)
+							(tp->ldisc.write_wakeup) (tp);
+						wake_up_interruptible(&tp->write_wait);
+					}
+				}
+			}
+			if (!I_IGNBRK(tp) && (MoxaPortResetBrkCnt(ch->port) > 0)) {
+				tty_insert_flip_char(tp, 0, TTY_BREAK);
+				tty_schedule_flip(tp);
+			}
+			if (MoxaPortDCDChange(ch->port)) {
+				if (ch->asyncflags & ASYNC_CHECK_CD) {
+					if (MoxaPortDCDON(ch->port))
+						wake_up_interruptible(&ch->open_wait);
+					else {
+						set_bit(MOXA_EVENT_HANGUP, &ch->event);
+						queue_task(&ch->tqueue, &tq_scheduler);
+					}
+				}
+			}
+		}
+	}
+
+	moxaTimer.function = moxa_poll;
+	moxaTimer.expires = jiffies + (HZ / 50);
+	moxaTimer_on = 1;
+	add_timer(&moxaTimer);
+}
+
+/******************************************************************************/
+
+static void set_tty_param(struct tty_struct *tty)
+{
+	register struct termios *ts;
+	struct moxa_str *ch;
+	int rts, cts, txflow, rxflow, xany;
+
+	ch = (struct moxa_str *) tty->driver_data;
+	ts = tty->termios;
+	if (ts->c_cflag & CLOCAL)
+		ch->asyncflags &= ~ASYNC_CHECK_CD;
+	else
+		ch->asyncflags |= ASYNC_CHECK_CD;
+	rts = cts = txflow = rxflow = xany = 0;
+	if (ts->c_cflag & CRTSCTS)
+		rts = cts = 1;
+	if (ts->c_iflag & IXON)
+		txflow = 1;
+	if (ts->c_iflag & IXOFF)
+		rxflow = 1;
+	if (ts->c_iflag & IXANY)
+		xany = 1;
+	MoxaPortFlowCtrl(ch->port, rts, cts, txflow, rxflow, xany);
+	MoxaPortSetTermio(ch->port, ts);
+}
+
+static int block_till_ready(struct tty_struct *tty, struct file *filp,
+			    struct moxa_str *ch)
+{
+	struct wait_queue wait = {current, NULL};
+	unsigned long flags;
+	int retval;
+	int do_clocal = C_CLOCAL(tty);
+
+	/*
+	 * If the device is in the middle of being closed, then block
+	 * until it's done, and then try again.
+	 */
+	if (tty_hung_up_p(filp) || (ch->asyncflags & ASYNC_CLOSING)) {
+		if (ch->asyncflags & ASYNC_CLOSING)
+			interruptible_sleep_on(&ch->close_wait);
+#ifdef SERIAL_DO_RESTART
+		if (ch->asyncflags & ASYNC_HUP_NOTIFY)
+			return (-EAGAIN);
+		else
+			return (-ERESTARTSYS);
+#else
+		return (-EAGAIN);
+#endif
+	}
+	/*
+	 * If this is a callout device, then just make sure the normal
+	 * device isn't being used.
+	 */
+	if (tty->driver.subtype == SERIAL_TYPE_CALLOUT) {
+		if (ch->asyncflags & ASYNC_NORMAL_ACTIVE)
+			return (-EBUSY);
+		if ((ch->asyncflags & ASYNC_CALLOUT_ACTIVE) &&
+		    (ch->asyncflags & ASYNC_SESSION_LOCKOUT) &&
+		    (ch->session != current->session))
+			return (-EBUSY);
+		if ((ch->asyncflags & ASYNC_CALLOUT_ACTIVE) &&
+		    (ch->asyncflags & ASYNC_PGRP_LOCKOUT) &&
+		    (ch->pgrp != current->pgrp))
+			return (-EBUSY);
+		ch->asyncflags |= ASYNC_CALLOUT_ACTIVE;
+		return (0);
+	}
+	/*
+	 * If non-blocking mode is set, then make the check up front
+	 * and then exit.
+	 */
+	if (filp->f_flags & O_NONBLOCK) {
+		if (ch->asyncflags & ASYNC_CALLOUT_ACTIVE)
+			return (-EBUSY);
+		ch->asyncflags |= ASYNC_NORMAL_ACTIVE;
+		return (0);
+	}
+	/*
+	 * Block waiting for the carrier detect and the line to become free
+	 */
+	retval = 0;
+	add_wait_queue(&ch->open_wait, &wait);
+#ifdef SERIAL_DEBUG_OPEN
+	printk("block_til_ready before block: ttys%d, count = %d\n",
+	       ch->line, ch->count);
+#endif
+	save_flags(flags);
+	cli();
+	if (!tty_hung_up_p(filp))
+		ch->count--;
+	restore_flags(flags);
+	ch->blocked_open++;
+	while (1) {
+		current->state = TASK_INTERRUPTIBLE;
+		if (tty_hung_up_p(filp) ||
+		    !(ch->asyncflags & ASYNC_INITIALIZED)) {
+#ifdef SERIAL_DO_RESTART
+			if (ch->asyncflags & ASYNC_HUP_NOTIFY)
+				retval = -EAGAIN;
+			else
+				retval = -ERESTARTSYS;
+#else
+			retval = -EAGAIN;
+#endif
+			break;
+		}
+		if (!(ch->asyncflags & ASYNC_CALLOUT_ACTIVE) &&
+		    !(ch->asyncflags & ASYNC_CLOSING) && (do_clocal ||
+						MoxaPortDCDON(ch->port)))
+			break;
+
+		if (signal_pending(current)) {
+			retval = -ERESTARTSYS;
+			break;
+		}
+		schedule();
+	}
+	current->state = TASK_RUNNING;
+	remove_wait_queue(&ch->open_wait, &wait);
+	if (!tty_hung_up_p(filp))
+		ch->count++;
+	ch->blocked_open--;
+#ifdef SERIAL_DEBUG_OPEN
+	printk("block_til_ready after blocking: ttys%d, count = %d\n",
+	       ch->line, ch->count);
+#endif
+	if (retval)
+		return (retval);
+	ch->asyncflags |= ASYNC_NORMAL_ACTIVE;
+	return (0);
+}
+
+static void setup_empty_event(struct tty_struct *tty)
+{
+	struct moxa_str *ch = tty->driver_data;
+	unsigned long flags;
+
+	save_flags(flags);
+	cli();
+	ch->statusflags |= EMPTYWAIT;
+	moxaEmptyTimer_on[ch->port] = 0;
+	del_timer(&moxaEmptyTimer[ch->port]);
+	moxaEmptyTimer[ch->port].expires = jiffies + HZ;
+	moxaEmptyTimer_on[ch->port] = 1;
+	add_timer(&moxaEmptyTimer[ch->port]);
+	restore_flags(flags);
+}
+
+static void check_xmit_empty(unsigned long data)
+{
+	struct moxa_str *ch;
+
+	ch = (struct moxa_str *) data;
+	moxaEmptyTimer_on[ch->port] = 0;
+	del_timer(&moxaEmptyTimer[ch->port]);
+	if (ch->tty && (ch->statusflags & EMPTYWAIT)) {
+		if (MoxaPortTxQueue(ch->port) == 0) {
+			ch->statusflags &= ~EMPTYWAIT;
+			if ((ch->tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
+			    ch->tty->ldisc.write_wakeup)
+				(ch->tty->ldisc.write_wakeup) (ch->tty);
+			wake_up_interruptible(&ch->tty->write_wait);
+			return;
+		}
+		moxaEmptyTimer[ch->port].expires = jiffies + HZ;
+		moxaEmptyTimer_on[ch->port] = 1;
+		add_timer(&moxaEmptyTimer[ch->port]);
+	} else
+		ch->statusflags &= ~EMPTYWAIT;
+}
+
+static void shut_down(struct moxa_str *ch)
+{
+	struct tty_struct *tp;
+
+	if (!(ch->asyncflags & ASYNC_INITIALIZED))
+		return;
+
+	tp = ch->tty;
+
+	MoxaPortDisable(ch->port);
+
+	/*
+	 * If we're a modem control device and HUPCL is on, drop RTS & DTR.
+	 */
+	if (tp->termios->c_cflag & HUPCL)
+		MoxaPortLineCtrl(ch->port, 0, 0);
+
+	ch->asyncflags &= ~ASYNC_INITIALIZED;
+}
+
+static void receive_data(struct moxa_str *ch)
+{
+	struct tty_struct *tp;
+	struct termios *ts;
+	int i, count, rc, space;
+	unsigned char *charptr, *flagptr;
+	unsigned long flags;
+
+	ts = 0;
+	tp = ch->tty;
+	if (tp)
+		ts = tp->termios;
+	/**************************************************
+	if ( !tp || !ts || !(ts->c_cflag & CREAD) ) {
+	*****************************************************/
+	if (!tp || !ts) {
+		MoxaPortFlushData(ch->port, 0);
+		return;
+	}
+	space = TTY_FLIPBUF_SIZE - tp->flip.count;
+	if (space <= 0)
+		return;
+	charptr = tp->flip.char_buf_ptr;
+	flagptr = tp->flip.flag_buf_ptr;
+	rc = tp->flip.count;
+	save_flags(flags);
+	cli();
+	count = MoxaPortReadData(ch->port, charptr, space);
+	restore_flags(flags);
+	for (i = 0; i < count; i++)
+		*flagptr++ = 0;
+	charptr += count;
+	rc += count;
+	tp->flip.count = rc;
+	tp->flip.char_buf_ptr = charptr;
+	tp->flip.flag_buf_ptr = flagptr;
+	tty_schedule_flip(ch->tty);
+}
+
+#define Magic_code	0x404
+
+/*
+ *    System Configuration
+ */
+/*
+ *    for C218 BIOS initialization
+ */
+#define C218_ConfBase	0x800
+#define C218_status	(C218_ConfBase + 0)	/* BIOS running status    */
+#define C218_diag	(C218_ConfBase + 2)	/* diagnostic status      */
+#define C218_key	(C218_ConfBase + 4)	/* WORD (0x218 for C218) */
+#define C218DLoad_len	(C218_ConfBase + 6)	/* WORD           */
+#define C218check_sum	(C218_ConfBase + 8)	/* BYTE           */
+#define C218chksum_ok	(C218_ConfBase + 0x0a)	/* BYTE (1:ok)            */
+#define C218_TestRx	(C218_ConfBase + 0x10)	/* 8 bytes for 8 ports    */
+#define C218_TestTx	(C218_ConfBase + 0x18)	/* 8 bytes for 8 ports    */
+#define C218_RXerr	(C218_ConfBase + 0x20)	/* 8 bytes for 8 ports    */
+#define C218_ErrFlag	(C218_ConfBase + 0x28)	/* 8 bytes for 8 ports    */
+
+#define C218_LoadBuf	0x0F00
+#define C218_KeyCode	0x218
+#define CP204J_KeyCode	0x204
+
+/*
+ *    for C320 BIOS initialization
+ */
+#define C320_ConfBase	0x800
+#define C320_LoadBuf	0x0f00
+#define STS_init	0x05	/* for C320_status        */
+
+#define C320_status	C320_ConfBase + 0	/* BIOS running status    */
+#define C320_diag	C320_ConfBase + 2	/* diagnostic status      */
+#define C320_key	C320_ConfBase + 4	/* WORD (0320H for C320) */
+#define C320DLoad_len	C320_ConfBase + 6	/* WORD           */
+#define C320check_sum	C320_ConfBase + 8	/* WORD           */
+#define C320chksum_ok	C320_ConfBase + 0x0a	/* WORD (1:ok)            */
+#define C320bapi_len	C320_ConfBase + 0x0c	/* WORD           */
+#define C320UART_no	C320_ConfBase + 0x0e	/* WORD           */
+
+#define C320_KeyCode	0x320
+
+#define FixPage_addr	0x0000	/* starting addr of static page  */
+#define DynPage_addr	0x2000	/* starting addr of dynamic page */
+#define C218_start	0x3000	/* starting addr of C218 BIOS prg */
+#define Control_reg	0x1ff0	/* select page and reset control */
+#define HW_reset	0x80
+
+/*
+ *    Function Codes
+ */
+#define FC_CardReset	0x80
+#define FC_ChannelReset 1	/* C320 firmware not supported */
+#define FC_EnableCH	2
+#define FC_DisableCH	3
+#define FC_SetParam	4
+#define FC_SetMode	5
+#define FC_SetRate	6
+#define FC_LineControl	7
+#define FC_LineStatus	8
+#define FC_XmitControl	9
+#define FC_FlushQueue	10
+#define FC_SendBreak	11
+#define FC_StopBreak	12
+#define FC_LoopbackON	13
+#define FC_LoopbackOFF	14
+#define FC_ClrIrqTable	15
+#define FC_SendXon	16
+#define FC_SetTermIrq	17	/* C320 firmware not supported */
+#define FC_SetCntIrq	18	/* C320 firmware not supported */
+#define FC_SetBreakIrq	19
+#define FC_SetLineIrq	20
+#define FC_SetFlowCtl	21
+#define FC_GenIrq	22
+#define FC_InCD180	23
+#define FC_OutCD180	24
+#define FC_InUARTreg	23
+#define FC_OutUARTreg	24
+#define FC_SetXonXoff	25
+#define FC_OutCD180CCR	26
+#define FC_ExtIQueue	27
+#define FC_ExtOQueue	28
+#define FC_ClrLineIrq	29
+#define FC_HWFlowCtl	30
+#define FC_GetClockRate 35
+#define FC_SetBaud	36
+#define FC_SetDataMode  41
+#define FC_GetCCSR      43
+#define FC_GetDataError 45
+#define FC_RxControl	50
+#define FC_ImmSend	51
+#define FC_SetXonState	52
+#define FC_SetXoffState	53
+#define FC_SetRxFIFOTrig 54
+#define FC_SetTxFIFOCnt 55
+#define FC_UnixRate	56
+#define FC_UnixResetTimer 57
+
+#define	RxFIFOTrig1	0
+#define	RxFIFOTrig4	1
+#define	RxFIFOTrig8	2
+#define	RxFIFOTrig14	3
+
+/*
+ *    Dual-Ported RAM
+ */
+#define DRAM_global	0
+#define INT_data	(DRAM_global + 0)
+#define Config_base	(DRAM_global + 0x108)
+
+#define IRQindex	(INT_data + 0)
+#define IRQpending	(INT_data + 4)
+#define IRQtable	(INT_data + 8)
+
+/*
+ *    Interrupt Status
+ */
+#define IntrRx		0x01	/* receiver data O.K.             */
+#define IntrTx		0x02	/* transmit buffer empty  */
+#define IntrFunc	0x04	/* function complete              */
+#define IntrBreak	0x08	/* received break         */
+#define IntrLine	0x10	/* line status change
+				   for transmitter                */
+#define IntrIntr	0x20	/* received INTR code             */
+#define IntrQuit	0x40	/* received QUIT code             */
+#define IntrEOF 	0x80	/* received EOF code              */
+
+#define IntrRxTrigger 	0x100	/* rx data count reach tigger value */
+#define IntrTxTrigger 	0x200	/* tx data count below trigger value */
+
+#define Magic_no	(Config_base + 0)
+#define Card_model_no	(Config_base + 2)
+#define Total_ports	(Config_base + 4)
+#define Module_cnt	(Config_base + 8)
+#define Module_no	(Config_base + 10)
+#define Timer_10ms	(Config_base + 14)
+#define Disable_IRQ	(Config_base + 20)
+#define TMS320_PORT1	(Config_base + 22)
+#define TMS320_PORT2	(Config_base + 24)
+#define TMS320_CLOCK	(Config_base + 26)
+
+/*
+ *    DATA BUFFER in DRAM
+ */
+#define Extern_table	0x400	/* Base address of the external table
+				   (24 words *    64) total 3K bytes
+				   (24 words * 128) total 6K bytes */
+#define Extern_size	0x60	/* 96 bytes                       */
+#define RXrptr		0x00	/* read pointer for RX buffer     */
+#define RXwptr		0x02	/* write pointer for RX buffer    */
+#define TXrptr		0x04	/* read pointer for TX buffer     */
+#define TXwptr		0x06	/* write pointer for TX buffer    */
+#define HostStat	0x08	/* IRQ flag and general flag      */
+#define FlagStat	0x0A
+#define FlowControl	0x0C	/* B7 B6 B5 B4 B3 B2 B1 B0              */
+					/*  x  x  x  x  |  |  |  |            */
+					/*              |  |  |  + CTS flow   */
+					/*              |  |  +--- RTS flow   */
+					/*              |  +------ TX Xon/Xoff */
+					/*              +--------- RX Xon/Xoff */
+#define Break_cnt	0x0E	/* received break count   */
+#define CD180TXirq	0x10	/* if non-0: enable TX irq        */
+#define RX_mask 	0x12
+#define TX_mask 	0x14
+#define Ofs_rxb 	0x16
+#define Ofs_txb 	0x18
+#define Page_rxb	0x1A
+#define Page_txb	0x1C
+#define EndPage_rxb	0x1E
+#define EndPage_txb	0x20
+#define Data_error	0x22
+#define RxTrigger	0x28
+#define TxTrigger	0x2a
+
+#define rRXwptr 	0x34
+#define Low_water	0x36
+
+#define FuncCode	0x40
+#define FuncArg 	0x42
+#define FuncArg1	0x44
+
+#define C218rx_size	0x2000	/* 8K bytes */
+#define C218tx_size	0x8000	/* 32K bytes */
+
+#define C218rx_mask	(C218rx_size - 1)
+#define C218tx_mask	(C218tx_size - 1)
+
+#define C320p8rx_size	0x2000
+#define C320p8tx_size	0x8000
+#define C320p8rx_mask	(C320p8rx_size - 1)
+#define C320p8tx_mask	(C320p8tx_size - 1)
+
+#define C320p16rx_size	0x2000
+#define C320p16tx_size	0x4000
+#define C320p16rx_mask	(C320p16rx_size - 1)
+#define C320p16tx_mask	(C320p16tx_size - 1)
+
+#define C320p24rx_size	0x2000
+#define C320p24tx_size	0x2000
+#define C320p24rx_mask	(C320p24rx_size - 1)
+#define C320p24tx_mask	(C320p24tx_size - 1)
+
+#define C320p32rx_size	0x1000
+#define C320p32tx_size	0x1000
+#define C320p32rx_mask	(C320p32rx_size - 1)
+#define C320p32tx_mask	(C320p32tx_size - 1)
+
+#define Page_size	0x2000
+#define Page_mask	(Page_size - 1)
+#define C218rx_spage	3
+#define C218tx_spage	4
+#define C218rx_pageno	1
+#define C218tx_pageno	4
+#define C218buf_pageno	5
+
+#define C320p8rx_spage	3
+#define C320p8tx_spage	4
+#define C320p8rx_pgno	1
+#define C320p8tx_pgno	4
+#define C320p8buf_pgno	5
+
+#define C320p16rx_spage 3
+#define C320p16tx_spage 4
+#define C320p16rx_pgno	1
+#define C320p16tx_pgno	2
+#define C320p16buf_pgno 3
+
+#define C320p24rx_spage 3
+#define C320p24tx_spage 4
+#define C320p24rx_pgno	1
+#define C320p24tx_pgno	1
+#define C320p24buf_pgno 2
+
+#define C320p32rx_spage 3
+#define C320p32tx_ofs	C320p32rx_size
+#define C320p32tx_spage 3
+#define C320p32buf_pgno 1
+
+/*
+ *    Host Status
+ */
+#define WakeupRx	0x01
+#define WakeupTx	0x02
+#define WakeupBreak	0x08
+#define WakeupLine	0x10
+#define WakeupIntr	0x20
+#define WakeupQuit	0x40
+#define WakeupEOF	0x80	/* used in VTIME control */
+#define WakeupRxTrigger	0x100
+#define WakeupTxTrigger	0x200
+/*
+ *    Flag status
+ */
+#define Rx_over		0x01
+#define Xoff_state	0x02
+#define Tx_flowOff	0x04
+#define Tx_enable	0x08
+#define CTS_state	0x10
+#define DSR_state	0x20
+#define DCD_state	0x80
+/*
+ *    FlowControl
+ */
+#define CTS_FlowCtl	1
+#define RTS_FlowCtl	2
+#define Tx_FlowCtl	4
+#define Rx_FlowCtl	8
+#define IXM_IXANY	0x10
+
+#define LowWater	128
+
+#define DTR_ON		1
+#define RTS_ON		2
+#define CTS_ON		1
+#define DSR_ON		2
+#define DCD_ON		8
+
+/* mode definition */
+#define	MX_CS8		0x03
+#define	MX_CS7		0x02
+#define	MX_CS6		0x01
+#define	MX_CS5		0x00
+
+#define	MX_STOP1	0x00
+#define	MX_STOP15	0x04
+#define	MX_STOP2	0x08
+
+#define	MX_PARNONE	0x00
+#define	MX_PAREVEN	0x40
+#define	MX_PARODD	0xC0
+
+/*
+ *    Query
+ */
+#define QueryPort	MAX_PORTS
+
+
+
+struct mon_str {
+	int tick;
+	int rxcnt[MAX_PORTS];
+	int txcnt[MAX_PORTS];
+};
+typedef struct mon_str mon_st;
+
+#define 	DCD_changed	0x01
+#define 	DCD_oldstate	0x80
+
+static unsigned char moxaBuff[10240];
+static unsigned long moxaIntNdx[MAX_BOARDS];
+static unsigned long moxaIntPend[MAX_BOARDS];
+static unsigned long moxaIntTable[MAX_BOARDS];
+static char moxaChkPort[MAX_PORTS];
+static char moxaLineCtrl[MAX_PORTS];
+static unsigned long moxaTableAddr[MAX_PORTS];
+static long moxaCurBaud[MAX_PORTS];
+static char moxaDCDState[MAX_PORTS];
+static char moxaLowChkFlag[MAX_PORTS];
+static int moxaLowWaterChk;
+static int moxaCard;
+static mon_st moxaLog;
+static int moxaFuncTout;
+static ushort moxaBreakCnt[MAX_PORTS];
+
+static void moxadelay(int);
+static void moxafunc(unsigned long, int, ushort);
+static void wait_finish(unsigned long);
+static void low_water_check(unsigned long);
+static int moxaloadbios(int, unsigned char *, int);
+static int moxafindcard(int);
+static int moxaload320b(int, unsigned char *, int);
+static int moxaloadcode(int, unsigned char *, int);
+static int moxaloadc218(int, unsigned long, int);
+static int moxaloadc320(int, unsigned long, int, int *);
+
+/*****************************************************************************
+ *	Driver level functions: 					     *
+ *	1. MoxaDriverInit(void);					     *
+ *	2. MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port);   *
+ *	3. MoxaDriverPoll(void);					     *
+ *****************************************************************************/
+void MoxaDriverInit(void)
+{
+	int i;
+
+	moxaFuncTout = HZ / 2;	/* 500 mini-seconds */
+	moxaCard = 0;
+	moxaLog.tick = 0;
+	moxaLowWaterChk = 0;
+	for (i = 0; i < MAX_PORTS; i++) {
+		moxaChkPort[i] = 0;
+		moxaLowChkFlag[i] = 0;
+		moxaLineCtrl[i] = 0;
+		moxaLog.rxcnt[i] = 0;
+		moxaLog.txcnt[i] = 0;
+	}
+}
+
+#define	MOXA		0x400
+#define MOXA_GET_IQUEUE 	(MOXA + 1)	/* get input buffered count */
+#define MOXA_GET_OQUEUE 	(MOXA + 2)	/* get output buffered count */
+#define MOXA_INIT_DRIVER	(MOXA + 6)	/* moxaCard=0 */
+#define MOXA_LOAD_BIOS		(MOXA + 9)	/* download BIOS */
+#define MOXA_FIND_BOARD		(MOXA + 10)	/* Check if MOXA card exist? */
+#define MOXA_LOAD_C320B		(MOXA + 11)	/* download 320B firmware */
+#define MOXA_LOAD_CODE		(MOXA + 12)	/* download firmware */
+#define MOXA_GETDATACOUNT       (MOXA + 23)
+#define MOXA_GET_IOQUEUE	(MOXA + 27)
+#define MOXA_FLUSH_QUEUE	(MOXA + 28)
+#define MOXA_GET_CONF		(MOXA + 35)	/* configuration */
+#define MOXA_GET_MAJOR          (MOXA + 63)
+#define MOXA_GET_CUMAJOR        (MOXA + 64)
+#define MOXA_GETMSTATUS         (MOXA + 65)
+
+
+struct moxaq_str {
+	int inq;
+	int outq;
+};
+
+struct dl_str {
+	char *buf;
+	int len;
+	int cardno;
+};
+
+static struct moxaq_str temp_queue[MAX_PORTS];
+static struct dl_str dltmp;
+
+void MoxaPortFlushData(int port, int mode)
+{
+	unsigned long ofsAddr;
+	if ((mode < 0) || (mode > 2))
+		return;
+	ofsAddr = moxaTableAddr[port];
+	moxafunc(ofsAddr, FC_FlushQueue, mode);
+	if (mode != 1) {
+		moxaLowChkFlag[port] = 0;
+		low_water_check(ofsAddr);
+	}
+}
+
+int MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port)
+{
+	int i;
+	int status;
+	int MoxaPortTxQueue(int), MoxaPortRxQueue(int);
+
+	if (port == QueryPort) {
+		if ((cmd != MOXA_GET_CONF) && (cmd != MOXA_INIT_DRIVER) &&
+		    (cmd != MOXA_LOAD_BIOS) && (cmd != MOXA_FIND_BOARD) && (cmd != MOXA_LOAD_C320B) &&
+		 (cmd != MOXA_LOAD_CODE) && (cmd != MOXA_GETDATACOUNT) &&
+		  (cmd != MOXA_GET_IOQUEUE) && (cmd != MOXA_GET_MAJOR) &&
+		    (cmd != MOXA_GET_CUMAJOR) && (cmd != MOXA_GETMSTATUS))
+			return (-EINVAL);
+	}
+	switch (cmd) {
+	case MOXA_GET_CONF:
+		if(copy_to_user((void *)arg, &moxa_boards, MAX_BOARDS * sizeof(moxa_board_conf)))
+			return -EFAULT;
+		return (0);
+	case MOXA_INIT_DRIVER:
+		if ((int) arg == 0x404)
+			MoxaDriverInit();
+		return (0);
+	case MOXA_GETDATACOUNT:
+		moxaLog.tick = jiffies;
+		if(copy_to_user((void *)arg, &moxaLog, sizeof(mon_st)))
+			return -EFAULT;
+		return (0);
+	case MOXA_FLUSH_QUEUE:
+		MoxaPortFlushData(port, arg);
+		return (0);
+	case MOXA_GET_IOQUEUE:
+		for (i = 0; i < MAX_PORTS; i++) {
+			if (moxaChkPort[i]) {
+				temp_queue[i].inq = MoxaPortRxQueue(i);
+				temp_queue[i].outq = MoxaPortTxQueue(i);
+			}
+		}
+		if(copy_to_user((void *)arg, temp_queue, sizeof(struct moxaq_str) * MAX_PORTS))
+			return -EFAULT;
+		return (0);
+	case MOXA_LOAD_BIOS:
+		if(copy_from_user(&dltmp, (void *)arg, sizeof(struct dl_str)))
+			return -EFAULT;
+		i = moxaloadbios(dltmp.cardno, dltmp.buf, dltmp.len);
+		return (i);
+	case MOXA_FIND_BOARD:
+		if(copy_from_user(&dltmp, (void *)arg, sizeof(struct dl_str)))
+			return -EFAULT;
+		return moxafindcard(dltmp.cardno);
+	case MOXA_LOAD_C320B:
+		if(copy_from_user(&dltmp, (void *)arg, sizeof(struct dl_str)))
+			return -EFAULT;
+		moxaload320b(dltmp.cardno, dltmp.buf, dltmp.len);
+		return (0);
+	case MOXA_LOAD_CODE:
+		if(copy_from_user(&dltmp, (void *)arg, sizeof(struct dl_str)))
+			return -EFAULT; 
+		i = moxaloadcode(dltmp.cardno, dltmp.buf, dltmp.len);
+		if (i == -1)
+			return (-EFAULT);
+		return (i);
+	case MOXA_GET_OQUEUE:
+		i = MoxaPortTxQueue(port);
+		return put_user(i, (unsigned long *) arg);
+	case MOXA_GET_IQUEUE:
+		i = MoxaPortRxQueue(port);
+		return put_user(i, (unsigned long *) arg);
+	case MOXA_GET_MAJOR:
+		if(copy_to_user((void *)arg, &ttymajor, sizeof(int)))
+			return -EFAULT;
+		return 0;
+	case MOXA_GET_CUMAJOR:
+		if(copy_to_user((void *)arg, &calloutmajor, sizeof(int)))
+			return -EFAULT;
+		return 0;
+	case MOXA_GETMSTATUS:
+		for (i = 0; i < MAX_PORTS; i++) {
+			GMStatus[i].ri = 0;
+			GMStatus[i].dcd = 0;
+			GMStatus[i].dsr = 0;
+			GMStatus[i].cts = 0;
+			if (!moxaChkPort[i]) {
+				continue;
+			} else {
+				status = MoxaPortLineStatus(moxaChannels[i].port);
+				if (status & 1)
+					GMStatus[i].cts = 1;
+				if (status & 2)
+					GMStatus[i].dsr = 1;
+				if (status & 4)
+					GMStatus[i].dcd = 1;
+			}
+
+			if (!moxaChannels[i].tty || !moxaChannels[i].tty->termios)
+				GMStatus[i].cflag = moxaChannels[i].normal_termios.c_cflag;
+			else
+				GMStatus[i].cflag = moxaChannels[i].tty->termios->c_cflag;
+		}
+		if(copy_to_user((void *)arg, GMStatus, sizeof(struct mxser_mstatus) * MAX_PORTS))
+			return -EFAULT;
+		return 0;
+
+	}
+	return (-ENOIOCTLCMD);
+}
+
+int MoxaDriverPoll(void)
+{
+	register ushort temp;
+	register int card;
+	unsigned long ip, ofsAddr;
+	int port, p, ports;
+
+	if (moxaCard == 0)
+		return (-1);
+	for (card = 0; card < MAX_BOARDS; card++) {
+		if ((ports = moxa_boards[card].numPorts) == 0)
+			continue;
+		if (readb(moxaIntPend[card]) == 0xff) {
+			ip = moxaIntTable[card] + readb(moxaIntNdx[card]);
+			p = card * MAX_PORTS_PER_BOARD;
+			ports <<= 1;
+			for (port = 0; port < ports; port += 2, p++) {
+				if ((temp = readw(ip + port)) != 0) {
+					writew(0, ip + port);
+					ofsAddr = moxaTableAddr[p];
+					if (temp & IntrTx)
+						writew(readw(ofsAddr + HostStat) & ~WakeupTx, ofsAddr + HostStat);
+					if (temp & IntrBreak) {
+						moxaBreakCnt[p]++;
+					}
+					if (temp & IntrLine) {
+						if (readb(ofsAddr + FlagStat) & DCD_state) {
+							if ((moxaDCDState[p] & DCD_oldstate) == 0)
+								moxaDCDState[p] = (DCD_oldstate |
+										   DCD_changed);
+						} else {
+							if (moxaDCDState[p] & DCD_oldstate)
+								moxaDCDState[p] = DCD_changed;
+						}
+					}
+				}
+			}
+			writeb(0, moxaIntPend[card]);
+		}
+		if (moxaLowWaterChk) {
+			p = card * MAX_PORTS_PER_BOARD;
+			for (port = 0; port < ports; port++, p++) {
+				if (moxaLowChkFlag[p]) {
+					moxaLowChkFlag[p] = 0;
+					ofsAddr = moxaTableAddr[p];
+					low_water_check(ofsAddr);
+				}
+			}
+		}
+	}
+	moxaLowWaterChk = 0;
+	return (0);
+}
+
+/*****************************************************************************
+ *	Card level function:						     *
+ *	1. MoxaPortsOfCard(int cardno); 				     *
+ *****************************************************************************/
+int MoxaPortsOfCard(int cardno)
+{
+
+	if (moxa_boards[cardno].boardType == 0)
+		return (0);
+	return (moxa_boards[cardno].numPorts);
+}
+
+/*****************************************************************************
+ *	Port level functions:						     *
+ *	1.  MoxaPortIsValid(int port);					     *
+ *	2.  MoxaPortEnable(int port);					     *
+ *	3.  MoxaPortDisable(int port);					     *
+ *	4.  MoxaPortGetMaxBaud(int port);				     *
+ *	5.  MoxaPortGetCurBaud(int port);				     *
+ *	6.  MoxaPortSetBaud(int port, long baud);			     *
+ *	7.  MoxaPortSetMode(int port, int databit, int stopbit, int parity); *
+ *	8.  MoxaPortSetTermio(int port, unsigned char *termio); 	     *
+ *	9.  MoxaPortGetLineOut(int port, int *dtrState, int *rtsState);      *
+ *	10. MoxaPortLineCtrl(int port, int dtrState, int rtsState);	     *
+ *	11. MoxaPortFlowCtrl(int port, int rts, int cts, int rx, int tx,int xany);    *
+ *	12. MoxaPortLineStatus(int port);				     *
+ *	13. MoxaPortDCDChange(int port);				     *
+ *	14. MoxaPortDCDON(int port);					     *
+ *	15. MoxaPortFlushData(int port, int mode);	                     *
+ *	16. MoxaPortWriteData(int port, unsigned char * buffer, int length); *
+ *	17. MoxaPortReadData(int port, unsigned char * buffer, int length);  *
+ *	18. MoxaPortTxBufSize(int port);				     *
+ *	19. MoxaPortRxBufSize(int port);				     *
+ *	20. MoxaPortTxQueue(int port);					     *
+ *	21. MoxaPortTxFree(int port);					     *
+ *	22. MoxaPortRxQueue(int port);					     *
+ *	23. MoxaPortRxFree(int port);					     *
+ *	24. MoxaPortTxDisable(int port);				     *
+ *	25. MoxaPortTxEnable(int port); 				     *
+ *	26. MoxaPortGetBrkCnt(int port);				     *
+ *	27. MoxaPortResetBrkCnt(int port);				     *
+ *	28. MoxaPortSetXonXoff(int port, int xonValue, int xoffValue);	     *
+ *	29. MoxaPortIsTxHold(int port); 				     *
+ *	30. MoxaPortSendBreak(int port, int ticks);			     *
+ *****************************************************************************/
+/*
+ *    Moxa Port Number Description:
+ *
+ *      MOXA serial driver supports up to 4 MOXA-C218/C320 boards. And,
+ *      the port number using in MOXA driver functions will be 0 to 31 for
+ *      first MOXA board, 32 to 63 for second, 64 to 95 for third and 96
+ *      to 127 for fourth. For example, if you setup three MOXA boards,
+ *      first board is C218, second board is C320-16 and third board is
+ *      C320-32. The port number of first board (C218 - 8 ports) is from
+ *      0 to 7. The port number of second board (C320 - 16 ports) is form
+ *      32 to 47. The port number of third board (C320 - 32 ports) is from
+ *      64 to 95. And those port numbers form 8 to 31, 48 to 63 and 96 to
+ *      127 will be invalid.
+ *
+ *
+ *      Moxa Functions Description:
+ *
+ *      Function 1:     Driver initialization routine, this routine must be
+ *                      called when initialized driver.
+ *      Syntax:
+ *      void MoxaDriverInit();
+ *
+ *
+ *      Function 2:     Moxa driver private IOCTL command processing.
+ *      Syntax:
+ *      int  MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port);
+ *
+ *           unsigned int cmd   : IOCTL command
+ *           unsigned long arg  : IOCTL argument
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    0  (OK)
+ *                      -EINVAL
+ *                      -ENOIOCTLCMD
+ *
+ *
+ *      Function 3:     Moxa driver polling process routine.
+ *      Syntax:
+ *      int  MoxaDriverPoll(void);
+ *
+ *           return:    0       ; polling O.K.
+ *                      -1      : no any Moxa card.             
+ *
+ *
+ *      Function 4:     Get the ports of this card.
+ *      Syntax:
+ *      int  MoxaPortsOfCard(int cardno);
+ *
+ *           int cardno         : card number (0 - 3)
+ *
+ *           return:    0       : this card is invalid
+ *                      8/16/24/32
+ *
+ *
+ *      Function 5:     Check this port is valid or invalid
+ *      Syntax:
+ *      int  MoxaPortIsValid(int port);
+ *           int port           : port number (0 - 127, ref port description)
+ *
+ *           return:    0       : this port is invalid
+ *                      1       : this port is valid
+ *
+ *
+ *      Function 6:     Enable this port to start Tx/Rx data.
+ *      Syntax:
+ *      void MoxaPortEnable(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *
+ *      Function 7:     Disable this port
+ *      Syntax:
+ *      void MoxaPortDisable(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *
+ *      Function 8:     Get the maximun available baud rate of this port.
+ *      Syntax:
+ *      long MoxaPortGetMaxBaud(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    0       : this port is invalid
+ *                      38400/57600/115200 bps
+ *
+ *
+ *      Function 9:     Get the current baud rate of this port.
+ *      Syntax:
+ *      long MoxaPortGetCurBaud(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    0       : this port is invalid
+ *                      50 - 115200 bps
+ *
+ *
+ *      Function 10:    Setting baud rate of this port.
+ *      Syntax:
+ *      long MoxaPortSetBaud(int port, long baud);
+ *           int port           : port number (0 - 127)
+ *           long baud          : baud rate (50 - 115200)
+ *
+ *           return:    0       : this port is invalid or baud < 50
+ *                      50 - 115200 : the real baud rate set to the port, if
+ *                                    the argument baud is large than maximun
+ *                                    available baud rate, the real setting
+ *                                    baud rate will be the maximun baud rate.
+ *
+ *
+ *      Function 11:    Setting the data-bits/stop-bits/parity of this port
+ *      Syntax:
+ *      int  MoxaPortSetMode(int port, int databits, int stopbits, int parity);
+ *           int port           : port number (0 - 127)
+ *           int databits       : data bits (8/7/6/5)
+ *           int stopbits       : stop bits (2/1/0, 0 show 1.5 stop bits)
+ int parity     : parity (0:None,1:Odd,2:Even,3:Mark,4:Space)
+ *
+ *           return:    -1      : invalid parameter
+ *                      0       : setting O.K.
+ *
+ *
+ *      Function 12:    Configure the port.
+ *      Syntax:
+ *      int  MoxaPortSetTermio(int port, struct termios *termio);
+ *           int port           : port number (0 - 127)
+ *           struct termios * termio : termio structure pointer
+ *
+ *           return:    -1      : this port is invalid or termio == NULL
+ *                      0       : setting O.K.
+ *
+ *
+ *      Function 13:    Get the DTR/RTS state of this port.
+ *      Syntax:
+ *      int  MoxaPortGetLineOut(int port, int *dtrState, int *rtsState);
+ *           int port           : port number (0 - 127)
+ *           int * dtrState     : pointer to INT to receive the current DTR
+ *                                state. (if NULL, this function will not
+ *                                write to this address)
+ *           int * rtsState     : pointer to INT to receive the current RTS
+ *                                state. (if NULL, this function will not
+ *                                write to this address)
+ *
+ *           return:    -1      : this port is invalid
+ *                      0       : O.K.
+ *
+ *
+ *      Function 14:    Setting the DTR/RTS output state of this port.
+ *      Syntax:
+ *      void MoxaPortLineCtrl(int port, int dtrState, int rtsState);
+ *           int port           : port number (0 - 127)
+ *           int dtrState       : DTR output state (0: off, 1: on)
+ *           int rtsState       : RTS output state (0: off, 1: on)
+ *
+ *
+ *      Function 15:    Setting the flow control of this port.
+ *      Syntax:
+ *      void MoxaPortFlowCtrl(int port, int rtsFlow, int ctsFlow, int rxFlow,
+ *                            int txFlow,int xany);
+ *           int port           : port number (0 - 127)
+ *           int rtsFlow        : H/W RTS flow control (0: no, 1: yes)
+ *           int ctsFlow        : H/W CTS flow control (0: no, 1: yes)
+ *           int rxFlow         : S/W Rx XON/XOFF flow control (0: no, 1: yes)
+ *           int txFlow         : S/W Tx XON/XOFF flow control (0: no, 1: yes)
+ *           int xany           : S/W XANY flow control (0: no, 1: yes)
+ *
+ *
+ *      Function 16:    Get ths line status of this port
+ *      Syntax:
+ *      int  MoxaPortLineStatus(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    Bit 0 - CTS state (0: off, 1: on)
+ *                      Bit 1 - DSR state (0: off, 1: on)
+ *                      Bit 2 - DCD state (0: off, 1: on)
+ *
+ *
+ *      Function 17:    Check the DCD state has changed since the last read
+ *                      of this function.
+ *      Syntax:
+ *      int  MoxaPortDCDChange(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    0       : no changed
+ *                      1       : DCD has changed
+ *
+ *
+ *      Function 18:    Check ths current DCD state is ON or not.
+ *      Syntax:
+ *      int  MoxaPortDCDON(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    0       : DCD off
+ *                      1       : DCD on
+ *
+ *
+ *      Function 19:    Flush the Rx/Tx buffer data of this port.
+ *      Syntax:
+ *      void MoxaPortFlushData(int port, int mode);
+ *           int port           : port number (0 - 127)
+ *           int mode    
+ *                      0       : flush the Rx buffer 
+ *                      1       : flush the Tx buffer 
+ *                      2       : flush the Rx and Tx buffer 
+ *
+ *
+ *      Function 20:    Write data.
+ *      Syntax:
+ *      int  MoxaPortWriteData(int port, unsigned char * buffer, int length);
+ *           int port           : port number (0 - 127)
+ *           unsigned char * buffer     : pointer to write data buffer.
+ *           int length         : write data length
+ *
+ *           return:    0 - length      : real write data length
+ *
+ *
+ *      Function 21:    Read data.
+ *      Syntax:
+ *      int  MoxaPortReadData(int port, unsigned char * buffer, int length);
+ *           int port           : port number (0 - 127)
+ *           unsigned char * buffer     : pointer to read data buffer.
+ *           int length         : read data buffer length
+ *
+ *           return:    0 - length      : real read data length
+ *
+ *
+ *      Function 22:    Get the Tx buffer size of this port
+ *      Syntax:
+ *      int  MoxaPortTxBufSize(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    ..      : Tx buffer size
+ *
+ *
+ *      Function 23:    Get the Rx buffer size of this port
+ *      Syntax:
+ *      int  MoxaPortRxBufSize(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    ..      : Rx buffer size
+ *
+ *
+ *      Function 24:    Get the Tx buffer current queued data bytes
+ *      Syntax:
+ *      int  MoxaPortTxQueue(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    ..      : Tx buffer current queued data bytes
+ *
+ *
+ *      Function 25:    Get the Tx buffer current free space
+ *      Syntax:
+ *      int  MoxaPortTxFree(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    ..      : Tx buffer current free space
+ *
+ *
+ *      Function 26:    Get the Rx buffer current queued data bytes
+ *      Syntax:
+ *      int  MoxaPortRxQueue(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    ..      : Rx buffer current queued data bytes
+ *
+ *
+ *      Function 27:    Get the Rx buffer current free space
+ *      Syntax:
+ *      int  MoxaPortRxFree(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    ..      : Rx buffer current free space
+ *
+ *
+ *      Function 28:    Disable port data transmission.
+ *      Syntax:
+ *      void MoxaPortTxDisable(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *
+ *      Function 29:    Enable port data transmission.
+ *      Syntax:
+ *      void MoxaPortTxEnable(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *
+ *      Function 30:    Get the received BREAK signal count.
+ *      Syntax:
+ *      int  MoxaPortGetBrkCnt(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    0 - ..  : BREAK signal count
+ *
+ *
+ *      Function 31:    Get the received BREAK signal count and reset it.
+ *      Syntax:
+ *      int  MoxaPortResetBrkCnt(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    0 - ..  : BREAK signal count
+ *
+ *
+ *      Function 32:    Set the S/W flow control new XON/XOFF value, default
+ *                      XON is 0x11 & XOFF is 0x13.
+ *      Syntax:
+ *      void MoxaPortSetXonXoff(int port, int xonValue, int xoffValue);
+ *           int port           : port number (0 - 127)
+ *           int xonValue       : new XON value (0 - 255)
+ *           int xoffValue      : new XOFF value (0 - 255)
+ *
+ *
+ *      Function 33:    Check this port's transmission is hold by remote site
+ *                      because the flow control.
+ *      Syntax:
+ *      int  MoxaPortIsTxHold(int port);
+ *           int port           : port number (0 - 127)
+ *
+ *           return:    0       : normal
+ *                      1       : hold by remote site
+ *
+ *
+ *      Function 34:    Send out a BREAK signal.
+ *      Syntax:
+ *      void MoxaPortSendBreak(int port, int ms100);
+ *           int port           : port number (0 - 127)
+ *           int ms100          : break signal time interval.
+ *                                unit: 100 mini-second. if ms100 == 0, it will
+ *                                send out a about 250 ms BREAK signal.
+ *
+ */
+int MoxaPortIsValid(int port)
+{
+
+	if (moxaCard == 0)
+		return (0);
+	if (moxaChkPort[port] == 0)
+		return (0);
+	return (1);
+}
+
+void MoxaPortEnable(int port)
+{
+	unsigned long ofsAddr;
+	int MoxaPortLineStatus(int);
+	short lowwater = 512;
+
+	ofsAddr = moxaTableAddr[port];
+	writew(lowwater, ofsAddr + Low_water);
+	moxaBreakCnt[port] = 0;
+	if ((moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_ISA) ||
+	    (moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_PCI)) {
+		moxafunc(ofsAddr, FC_SetBreakIrq, 0);
+	} else {
+		writew(readw(ofsAddr + HostStat) | WakeupBreak, ofsAddr + HostStat);
+	}
+
+	moxafunc(ofsAddr, FC_SetLineIrq, Magic_code);
+	moxafunc(ofsAddr, FC_FlushQueue, 2);
+
+	moxafunc(ofsAddr, FC_EnableCH, Magic_code);
+	MoxaPortLineStatus(port);
+}
+
+void MoxaPortDisable(int port)
+{
+	unsigned long ofsAddr;
+
+	ofsAddr = moxaTableAddr[port];
+	moxafunc(ofsAddr, FC_SetFlowCtl, 0);	/* disable flow control */
+	moxafunc(ofsAddr, FC_ClrLineIrq, Magic_code);
+	writew(0, ofsAddr + HostStat);
+	moxafunc(ofsAddr, FC_DisableCH, Magic_code);
+}
+
+long MoxaPortGetMaxBaud(int port)
+{
+	if ((moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_ISA) ||
+	    (moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_PCI))
+		return (460800L);
+	else
+		return (921600L);
+}
+
+
+long MoxaPortSetBaud(int port, long baud)
+{
+	unsigned long ofsAddr;
+	long max, clock;
+	unsigned int val;
+
+	if ((baud < 50L) || ((max = MoxaPortGetMaxBaud(port)) == 0))
+		return (0);
+	ofsAddr = moxaTableAddr[port];
+	if (baud > max)
+		baud = max;
+	if (max == 38400L)
+		clock = 614400L;	/* for 9.8304 Mhz : max. 38400 bps */
+	else if (max == 57600L)
+		clock = 691200L;	/* for 11.0592 Mhz : max. 57600 bps */
+	else
+		clock = 921600L;	/* for 14.7456 Mhz : max. 115200 bps */
+	val = clock / baud;
+	moxafunc(ofsAddr, FC_SetBaud, val);
+	baud = clock / val;
+	moxaCurBaud[port] = baud;
+	return (baud);
+}
+
+int MoxaPortSetTermio(int port, struct termios *termio)
+{
+	unsigned long ofsAddr;
+	tcflag_t cflag;
+	long baud;
+	tcflag_t mode = 0;
+
+	if (moxaChkPort[port] == 0 || termio == 0)
+		return (-1);
+	ofsAddr = moxaTableAddr[port];
+	cflag = termio->c_cflag;	/* termio->c_cflag */
+
+	mode = termio->c_cflag & CSIZE;
+	if (mode == CS5)
+		mode = MX_CS5;
+	else if (mode == CS6)
+		mode = MX_CS6;
+	else if (mode == CS7)
+		mode = MX_CS7;
+	else if (mode == CS8)
+		mode = MX_CS8;
+
+	if (termio->c_cflag & CSTOPB) {
+		if (mode == MX_CS5)
+			mode |= MX_STOP15;
+		else
+			mode |= MX_STOP2;
+	} else
+		mode |= MX_STOP1;
+
+	if (termio->c_cflag & PARENB) {
+		if (termio->c_cflag & PARODD)
+			mode |= MX_PARODD;
+		else
+			mode |= MX_PAREVEN;
+	} else
+		mode |= MX_PARNONE;
+
+	moxafunc(ofsAddr, FC_SetDataMode, (ushort) mode);
+
+	cflag &= (CBAUD | CBAUDEX);
+#ifndef B921600
+#define	B921600	(B460800+1)
+#endif
+	switch (cflag) {
+	case B921600:
+		baud = 921600L;
+		break;
+	case B460800:
+		baud = 460800L;
+		break;
+	case B230400:
+		baud = 230400L;
+		break;
+	case B115200:
+		baud = 115200L;
+		break;
+	case B57600:
+		baud = 57600L;
+		break;
+	case B38400:
+		baud = 38400L;
+		break;
+	case B19200:
+		baud = 19200L;
+		break;
+	case B9600:
+		baud = 9600L;
+		break;
+	case B4800:
+		baud = 4800L;
+		break;
+	case B2400:
+		baud = 2400L;
+		break;
+	case B1800:
+		baud = 1800L;
+		break;
+	case B1200:
+		baud = 1200L;
+		break;
+	case B600:
+		baud = 600L;
+		break;
+	case B300:
+		baud = 300L;
+		break;
+	case B200:
+		baud = 200L;
+		break;
+	case B150:
+		baud = 150L;
+		break;
+	case B134:
+		baud = 134L;
+		break;
+	case B110:
+		baud = 110L;
+		break;
+	case B75:
+		baud = 75L;
+		break;
+	case B50:
+		baud = 50L;
+		break;
+	default:
+		baud = 0;
+	}
+	if ((moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_ISA) ||
+	    (moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_PCI)) {
+		if (baud == 921600L)
+			return (-1);
+	}
+	MoxaPortSetBaud(port, baud);
+
+	if (termio->c_iflag & (IXON | IXOFF | IXANY)) {
+		writeb(termio->c_cc[VSTART], ofsAddr + FuncArg);
+		writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1);
+		writeb(FC_SetXonXoff, ofsAddr + FuncCode);
+		wait_finish(ofsAddr);
+
+	}
+	return (0);
+}
+
+int MoxaPortGetLineOut(int port, int *dtrState, int *rtsState)
+{
+
+	if (!MoxaPortIsValid(port))
+		return (-1);
+	if (dtrState) {
+		if (moxaLineCtrl[port] & DTR_ON)
+			*dtrState = 1;
+		else
+			*dtrState = 0;
+	}
+	if (rtsState) {
+		if (moxaLineCtrl[port] & RTS_ON)
+			*rtsState = 1;
+		else
+			*rtsState = 0;
+	}
+	return (0);
+}
+
+void MoxaPortLineCtrl(int port, int dtr, int rts)
+{
+	unsigned long ofsAddr;
+	int mode;
+
+	ofsAddr = moxaTableAddr[port];
+	mode = 0;
+	if (dtr)
+		mode |= DTR_ON;
+	if (rts)
+		mode |= RTS_ON;
+	moxaLineCtrl[port] = mode;
+	moxafunc(ofsAddr, FC_LineControl, mode);
+}
+
+void MoxaPortFlowCtrl(int port, int rts, int cts, int txflow, int rxflow, int txany)
+{
+	unsigned long ofsAddr;
+	int mode;
+
+	ofsAddr = moxaTableAddr[port];
+	mode = 0;
+	if (rts)
+		mode |= RTS_FlowCtl;
+	if (cts)
+		mode |= CTS_FlowCtl;
+	if (txflow)
+		mode |= Tx_FlowCtl;
+	if (rxflow)
+		mode |= Rx_FlowCtl;
+	if (txany)
+		mode |= IXM_IXANY;
+	moxafunc(ofsAddr, FC_SetFlowCtl, mode);
+}
+
+int MoxaPortLineStatus(int port)
+{
+	unsigned long ofsAddr;
+	int val;
+
+	ofsAddr = moxaTableAddr[port];
+	if ((moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_ISA) ||
+	    (moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_PCI)) {
+		moxafunc(ofsAddr, FC_LineStatus, 0);
+		val = readw(ofsAddr + FuncArg);
+	} else {
+		val = readw(ofsAddr + FlagStat) >> 4;
+	}
+	val &= 0x0B;
+	if (val & 8) {
+		val |= 4;
+		if ((moxaDCDState[port] & DCD_oldstate) == 0)
+			moxaDCDState[port] = (DCD_oldstate | DCD_changed);
+	} else {
+		if (moxaDCDState[port] & DCD_oldstate)
+			moxaDCDState[port] = DCD_changed;
+	}
+	val &= 7;
+	return (val);
+}
+
+int MoxaPortDCDChange(int port)
+{
+	int n;
+
+	if (moxaChkPort[port] == 0)
+		return (0);
+	n = moxaDCDState[port];
+	moxaDCDState[port] &= ~DCD_changed;
+	n &= DCD_changed;
+	return (n);
+}
+
+int MoxaPortDCDON(int port)
+{
+	int n;
+
+	if (moxaChkPort[port] == 0)
+		return (0);
+	if (moxaDCDState[port] & DCD_oldstate)
+		n = 1;
+	else
+		n = 0;
+	return (n);
+}
+
+
+/*
+   int MoxaDumpMem(int port, unsigned char * buffer, int len)
+   {
+   int          i;
+   unsigned long                baseAddr,ofsAddr,ofs;
+
+   baseAddr = moxaBaseAddr[port / MAX_PORTS_PER_BOARD];
+   ofs = baseAddr + DynPage_addr + pageofs;
+   if (len > 0x2000L)
+   len = 0x2000L;
+   for (i = 0; i < len; i++)
+   buffer[i] = readb(ofs+i);
+   }
+ */
+
+
+int MoxaPortWriteData(int port, unsigned char * buffer, int len)
+{
+	int c, total, i;
+	ushort tail;
+	int cnt;
+	ushort head, tx_mask, spage, epage;
+	ushort pageno, pageofs, bufhead;
+	unsigned long baseAddr, ofsAddr, ofs;
+
+	ofsAddr = moxaTableAddr[port];
+	baseAddr = moxaBaseAddr[port / MAX_PORTS_PER_BOARD];
+	tx_mask = readw(ofsAddr + TX_mask);
+	spage = readw(ofsAddr + Page_txb);
+	epage = readw(ofsAddr + EndPage_txb);
+	tail = readw(ofsAddr + TXwptr);
+	head = readw(ofsAddr + TXrptr);
+	c = (head > tail) ? (head - tail - 1)
+	    : (head - tail + tx_mask);
+	if (c > len)
+		c = len;
+	moxaLog.txcnt[port] += c;
+	total = c;
+	if (spage == epage) {
+		bufhead = readw(ofsAddr + Ofs_txb);
+		writew(spage, baseAddr + Control_reg);
+		while (c > 0) {
+			if (head > tail)
+				len = head - tail - 1;
+			else
+				len = tx_mask + 1 - tail;
+			len = (c > len) ? len : c;
+			ofs = baseAddr + DynPage_addr + bufhead + tail;
+			for (i = 0; i < len; i++)
+				writeb(*buffer++, ofs + i);
+			tail = (tail + len) & tx_mask;
+			c -= len;
+		}
+		writew(tail, ofsAddr + TXwptr);
+	} else {
+		len = c;
+		pageno = spage + (tail >> 13);
+		pageofs = tail & Page_mask;
+		do {
+			cnt = Page_size - pageofs;
+			if (cnt > c)
+				cnt = c;
+			c -= cnt;
+			writeb(pageno, baseAddr + Control_reg);
+			ofs = baseAddr + DynPage_addr + pageofs;
+			for (i = 0; i < cnt; i++)
+				writeb(*buffer++, ofs + i);
+			if (c == 0) {
+				writew((tail + len) & tx_mask, ofsAddr + TXwptr);
+				break;
+			}
+			if (++pageno == epage)
+				pageno = spage;
+			pageofs = 0;
+		} while (1);
+	}
+	writeb(1, ofsAddr + CD180TXirq);	/* start to send */
+	return (total);
+}
+
+int MoxaPortReadData(int port, unsigned char * buffer, int space)
+{
+	register ushort head, pageofs;
+	int i, count, cnt, len, total, remain;
+	ushort tail, rx_mask, spage, epage;
+	ushort pageno, bufhead;
+	unsigned long baseAddr, ofsAddr, ofs;
+
+	ofsAddr = moxaTableAddr[port];
+	baseAddr = moxaBaseAddr[port / MAX_PORTS_PER_BOARD];
+	head = readw(ofsAddr + RXrptr);
+	tail = readw(ofsAddr + RXwptr);
+	rx_mask = readw(ofsAddr + RX_mask);
+	spage = readw(ofsAddr + Page_rxb);
+	epage = readw(ofsAddr + EndPage_rxb);
+	count = (tail >= head) ? (tail - head)
+	    : (tail - head + rx_mask + 1);
+	if (count == 0)
+		return (0);
+
+	total = (space > count) ? count : space;
+	remain = count - total;
+	moxaLog.rxcnt[port] += total;
+	count = total;
+	if (spage == epage) {
+		bufhead = readw(ofsAddr + Ofs_rxb);
+		writew(spage, baseAddr + Control_reg);
+		while (count > 0) {
+			if (tail >= head)
+				len = tail - head;
+			else
+				len = rx_mask + 1 - head;
+			len = (count > len) ? len : count;
+			ofs = baseAddr + DynPage_addr + bufhead + head;
+			for (i = 0; i < len; i++)
+				*buffer++ = readb(ofs + i);
+			head = (head + len) & rx_mask;
+			count -= len;
+		}
+		writew(head, ofsAddr + RXrptr);
+	} else {
+		len = count;
+		pageno = spage + (head >> 13);
+		pageofs = head & Page_mask;
+		do {
+			cnt = Page_size - pageofs;
+			if (cnt > count)
+				cnt = count;
+			count -= cnt;
+			writew(pageno, baseAddr + Control_reg);
+			ofs = baseAddr + DynPage_addr + pageofs;
+			for (i = 0; i < cnt; i++)
+				*buffer++ = readb(ofs + i);
+			if (count == 0) {
+				writew((head + len) & rx_mask, ofsAddr + RXrptr);
+				break;
+			}
+			if (++pageno == epage)
+				pageno = spage;
+			pageofs = 0;
+		} while (1);
+	}
+	if ((readb(ofsAddr + FlagStat) & Xoff_state) && (remain < LowWater)) {
+		moxaLowWaterChk = 1;
+		moxaLowChkFlag[port] = 1;
+	}
+	return (total);
+}
+
+
+int MoxaPortTxQueue(int port)
+{
+	unsigned long ofsAddr;
+	ushort rptr, wptr, mask;
+	int len;
+
+	ofsAddr = moxaTableAddr[port];
+	rptr = readw(ofsAddr + TXrptr);
+	wptr = readw(ofsAddr + TXwptr);
+	mask = readw(ofsAddr + TX_mask);
+	len = (wptr - rptr) & mask;
+	return (len);
+}
+
+int MoxaPortTxFree(int port)
+{
+	unsigned long ofsAddr;
+	ushort rptr, wptr, mask;
+	int len;
+
+	ofsAddr = moxaTableAddr[port];
+	rptr = readw(ofsAddr + TXrptr);
+	wptr = readw(ofsAddr + TXwptr);
+	mask = readw(ofsAddr + TX_mask);
+	len = mask - ((wptr - rptr) & mask);
+	return (len);
+}
+
+int MoxaPortRxQueue(int port)
+{
+	unsigned long ofsAddr;
+	ushort rptr, wptr, mask;
+	int len;
+
+	ofsAddr = moxaTableAddr[port];
+	rptr = readw(ofsAddr + RXrptr);
+	wptr = readw(ofsAddr + RXwptr);
+	mask = readw(ofsAddr + RX_mask);
+	len = (wptr - rptr) & mask;
+	return (len);
+}
+
+
+void MoxaPortTxDisable(int port)
+{
+	unsigned long ofsAddr;
+
+	ofsAddr = moxaTableAddr[port];
+	moxafunc(ofsAddr, FC_SetXoffState, Magic_code);
+}
+
+void MoxaPortTxEnable(int port)
+{
+	unsigned long ofsAddr;
+
+	ofsAddr = moxaTableAddr[port];
+	moxafunc(ofsAddr, FC_SetXonState, Magic_code);
+}
+
+
+int MoxaPortResetBrkCnt(int port)
+{
+	ushort cnt;
+	cnt = moxaBreakCnt[port];
+	moxaBreakCnt[port] = 0;
+	return (cnt);
+}
+
+
+void MoxaPortSendBreak(int port, int ms100)
+{
+	unsigned long ofsAddr;
+
+	ofsAddr = moxaTableAddr[port];
+	if (ms100) {
+		moxafunc(ofsAddr, FC_SendBreak, Magic_code);
+		moxadelay(ms100 * (HZ / 10));
+	} else {
+		moxafunc(ofsAddr, FC_SendBreak, Magic_code);
+		moxadelay(HZ / 4);	/* 250 ms */
+	}
+	moxafunc(ofsAddr, FC_StopBreak, Magic_code);
+}
+
+static int moxa_get_serial_info(struct moxa_str *info,
+				struct serial_struct *retinfo)
+{
+	struct serial_struct tmp;
+
+	if (!retinfo)
+		return (-EFAULT);
+	memset(&tmp, 0, sizeof(tmp));
+	tmp.type = info->type;
+	tmp.line = info->port;
+	tmp.port = 0;
+	tmp.irq = 0;
+	tmp.flags = info->asyncflags;
+	tmp.baud_base = 921600;
+	tmp.close_delay = info->close_delay;
+	tmp.closing_wait = info->closing_wait;
+	tmp.custom_divisor = 0;
+	tmp.hub6 = 0;
+	if(copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+		return -EFAULT;
+	return (0);
+}
+
+
+static int moxa_set_serial_info(struct moxa_str *info,
+				struct serial_struct *new_info)
+{
+	struct serial_struct new_serial;
+
+	if(copy_from_user(&new_serial, new_info, sizeof(new_serial)))
+		return -EFAULT;
+
+	if ((new_serial.irq != 0) ||
+	    (new_serial.port != 0) ||
+//           (new_serial.type != info->type) ||
+	    (new_serial.custom_divisor != 0) ||
+	    (new_serial.baud_base != 921600))
+		return (-EPERM);
+
+	if (!suser()) {
+		if (((new_serial.flags & ~ASYNC_USR_MASK) !=
+		     (info->asyncflags & ~ASYNC_USR_MASK)))
+			return (-EPERM);
+	} else {
+		info->close_delay = new_serial.close_delay * HZ / 100;
+		info->closing_wait = new_serial.closing_wait * HZ / 100;
+	}
+
+	new_serial.flags = (new_serial.flags & ~ASYNC_FLAGS);
+	new_serial.flags |= (info->asyncflags & ASYNC_FLAGS);
+
+	if (new_serial.type == PORT_16550A) {
+		MoxaSetFifo(info->port, 1);
+	} else {
+		MoxaSetFifo(info->port, 0);
+	}
+
+	info->type = new_serial.type;
+	return (0);
+}
+
+
+
+/*****************************************************************************
+ *	Static local functions: 					     *
+ *****************************************************************************/
+/*
+ * moxadelay - delays a specified number ticks
+ */
+static void moxadelay(int tick)
+{
+	unsigned long st, et;
+
+	st = jiffies;
+	et = st + tick;
+	while (jiffies < et);
+}
+
+static void moxafunc(unsigned long ofsAddr, int cmd, ushort arg)
+{
+
+	writew(arg, ofsAddr + FuncArg);
+	writew(cmd, ofsAddr + FuncCode);
+	wait_finish(ofsAddr);
+}
+
+static void wait_finish(unsigned long ofsAddr)
+{
+	unsigned long i, j;
+
+	i = jiffies;
+	while (readw(ofsAddr + FuncCode) != 0) {
+		j = jiffies;
+		if ((j - i) > moxaFuncTout) {
+			return;
+		}
+	}
+}
+
+static void low_water_check(unsigned long ofsAddr)
+{
+	int len;
+	ushort rptr, wptr, mask;
+
+	if (readb(ofsAddr + FlagStat) & Xoff_state) {
+		rptr = readw(ofsAddr + RXrptr);
+		wptr = readw(ofsAddr + RXwptr);
+		mask = readw(ofsAddr + RX_mask);
+		len = (wptr - rptr) & mask;
+		if (len <= Low_water)
+			moxafunc(ofsAddr, FC_SendXon, 0);
+	}
+}
+
+static int moxaloadbios(int cardno, unsigned char *tmp, int len)
+{
+	unsigned long baseAddr;
+	int i;
+
+	if(copy_from_user(moxaBuff, tmp, len))
+		return -EFAULT;
+	baseAddr = moxaBaseAddr[cardno];
+	writeb(HW_reset, baseAddr + Control_reg);	/* reset */
+	moxadelay(1);		/* delay 10 ms */
+	for (i = 0; i < 4096; i++)
+		writeb(0, baseAddr + i);	/* clear fix page */
+	for (i = 0; i < len; i++)
+		writeb(moxaBuff[i], baseAddr + i);	/* download BIOS */
+	writeb(0, baseAddr + Control_reg);	/* restart */
+	return (0);
+}
+
+static int moxafindcard(int cardno)
+{
+	unsigned long baseAddr;
+	ushort tmp;
+
+	baseAddr = moxaBaseAddr[cardno];
+	switch (moxa_boards[cardno].boardType) {
+	case MOXA_BOARD_C218_ISA:
+	case MOXA_BOARD_C218_PCI:
+		if ((tmp = readw(baseAddr + C218_key)) != C218_KeyCode) {
+			return (-1);
+		}
+		break;
+	case MOXA_BOARD_CP204J:
+		if ((tmp = readw(baseAddr + C218_key)) != CP204J_KeyCode) {
+			return (-1);
+		}
+		break;
+	default:
+		if ((tmp = readw(baseAddr + C320_key)) != C320_KeyCode) {
+			return (-1);
+		}
+		if ((tmp = readw(baseAddr + C320_status)) != STS_init) {
+			return (-2);
+		}
+	}
+	return (0);
+}
+
+static int moxaload320b(int cardno, unsigned char * tmp, int len)
+{
+	unsigned long baseAddr;
+	int i;
+
+	if(copy_from_user(moxaBuff, tmp, len))
+		return -EFAULT;
+	baseAddr = moxaBaseAddr[cardno];
+	writew(len - 7168 - 2, baseAddr + C320bapi_len);
+	writeb(1, baseAddr + Control_reg);	/* Select Page 1 */
+	for (i = 0; i < 7168; i++)
+		writeb(moxaBuff[i], baseAddr + DynPage_addr + i);
+	writeb(2, baseAddr + Control_reg);	/* Select Page 2 */
+	for (i = 0; i < (len - 7168); i++)
+		writeb(moxaBuff[i + 7168], baseAddr + DynPage_addr + i);
+	return (0);
+}
+
+static int moxaloadcode(int cardno, unsigned char * tmp, int len)
+{
+	unsigned long baseAddr, ofsAddr;
+	int retval, port, i;
+
+	if(copy_from_user(moxaBuff, tmp, len))
+		return -EFAULT;
+	baseAddr = moxaBaseAddr[cardno];
+	switch (moxa_boards[cardno].boardType) {
+	case MOXA_BOARD_C218_ISA:
+	case MOXA_BOARD_C218_PCI:
+	case MOXA_BOARD_CP204J:
+		retval = moxaloadc218(cardno, baseAddr, len);
+		if (retval)
+			return (retval);
+		port = cardno * MAX_PORTS_PER_BOARD;
+		for (i = 0; i < moxa_boards[cardno].numPorts; i++, port++) {
+			moxaChkPort[port] = 1;
+			moxaCurBaud[port] = 9600L;
+			moxaDCDState[port] = 0;
+			moxaTableAddr[port] = baseAddr + Extern_table + Extern_size * i;
+			ofsAddr = moxaTableAddr[port];
+			writew(C218rx_mask, ofsAddr + RX_mask);
+			writew(C218tx_mask, ofsAddr + TX_mask);
+			writew(C218rx_spage + i * C218buf_pageno, ofsAddr + Page_rxb);
+			writew(readw(ofsAddr + Page_rxb) + C218rx_pageno, ofsAddr + EndPage_rxb);
+
+			writew(C218tx_spage + i * C218buf_pageno, ofsAddr + Page_txb);
+			writew(readw(ofsAddr + Page_txb) + C218tx_pageno, ofsAddr + EndPage_txb);
+
+		}
+		break;
+	default:
+		retval = moxaloadc320(cardno, baseAddr, len,
+				      &moxa_boards[cardno].numPorts);
+		if (retval)
+			return (retval);
+		port = cardno * MAX_PORTS_PER_BOARD;
+		for (i = 0; i < moxa_boards[cardno].numPorts; i++, port++) {
+			moxaChkPort[port] = 1;
+			moxaCurBaud[port] = 9600L;
+			moxaDCDState[port] = 0;
+			moxaTableAddr[port] = baseAddr + Extern_table + Extern_size * i;
+			ofsAddr = moxaTableAddr[port];
+			if (moxa_boards[cardno].numPorts == 8) {
+				writew(C320p8rx_mask, ofsAddr + RX_mask);
+				writew(C320p8tx_mask, ofsAddr + TX_mask);
+				writew(C320p8rx_spage + i * C320p8buf_pgno, ofsAddr + Page_rxb);
+				writew(readw(ofsAddr + Page_rxb) + C320p8rx_pgno, ofsAddr + EndPage_rxb);
+				writew(C320p8tx_spage + i * C320p8buf_pgno, ofsAddr + Page_txb);
+				writew(readw(ofsAddr + Page_txb) + C320p8tx_pgno, ofsAddr + EndPage_txb);
+
+			} else if (moxa_boards[cardno].numPorts == 16) {
+				writew(C320p16rx_mask, ofsAddr + RX_mask);
+				writew(C320p16tx_mask, ofsAddr + TX_mask);
+				writew(C320p16rx_spage + i * C320p16buf_pgno, ofsAddr + Page_rxb);
+				writew(readw(ofsAddr + Page_rxb) + C320p16rx_pgno, ofsAddr + EndPage_rxb);
+				writew(C320p16tx_spage + i * C320p16buf_pgno, ofsAddr + Page_txb);
+				writew(readw(ofsAddr + Page_txb) + C320p16tx_pgno, ofsAddr + EndPage_txb);
+
+			} else if (moxa_boards[cardno].numPorts == 24) {
+				writew(C320p24rx_mask, ofsAddr + RX_mask);
+				writew(C320p24tx_mask, ofsAddr + TX_mask);
+				writew(C320p24rx_spage + i * C320p24buf_pgno, ofsAddr + Page_rxb);
+				writew(readw(ofsAddr + Page_rxb) + C320p24rx_pgno, ofsAddr + EndPage_rxb);
+				writew(C320p24tx_spage + i * C320p24buf_pgno, ofsAddr + Page_txb);
+				writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
+			} else if (moxa_boards[cardno].numPorts == 32) {
+				writew(C320p32rx_mask, ofsAddr + RX_mask);
+				writew(C320p32tx_mask, ofsAddr + TX_mask);
+				writew(C320p32tx_ofs, ofsAddr + Ofs_txb);
+				writew(C320p32rx_spage + i * C320p32buf_pgno, ofsAddr + Page_rxb);
+				writew(readb(ofsAddr + Page_rxb), ofsAddr + EndPage_rxb);
+				writew(C320p32tx_spage + i * C320p32buf_pgno, ofsAddr + Page_txb);
+				writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
+			}
+		}
+		break;
+	}
+	return (0);
+}
+
+static int moxaloadc218(int cardno, unsigned long baseAddr, int len)
+{
+	char retry;
+	int i, j, len1, len2;
+	ushort usum, *ptr, keycode;
+
+	if (moxa_boards[cardno].boardType == MOXA_BOARD_CP204J)
+		keycode = CP204J_KeyCode;
+	else
+		keycode = C218_KeyCode;
+	usum = 0;
+	len1 = len >> 1;
+	ptr = (ushort *) moxaBuff;
+	for (i = 0; i < len1; i++)
+		usum += *(ptr + i);
+	retry = 0;
+	do {
+		len1 = len >> 1;
+		j = 0;
+		while (len1) {
+			len2 = (len1 > 2048) ? 2048 : len1;
+			len1 -= len2;
+			for (i = 0; i < len2 << 1; i++)
+				writeb(moxaBuff[i + j], baseAddr + C218_LoadBuf + i);
+			j += i;
+
+			writew(len2, baseAddr + C218DLoad_len);
+			writew(0, baseAddr + C218_key);
+			for (i = 0; i < 100; i++) {
+				if (readw(baseAddr + C218_key) == keycode)
+					break;
+				moxadelay(1);	/* delay 10 ms */
+			}
+			if (readw(baseAddr + C218_key) != keycode) {
+				return (-1);
+			}
+		}
+		writew(0, baseAddr + C218DLoad_len);
+		writew(usum, baseAddr + C218check_sum);
+		writew(0, baseAddr + C218_key);
+		for (i = 0; i < 100; i++) {
+			if (readw(baseAddr + C218_key) == keycode)
+				break;
+			moxadelay(1);	/* delay 10 ms */
+		}
+		retry++;
+	} while ((readb(baseAddr + C218chksum_ok) != 1) && (retry < 3));
+	if (readb(baseAddr + C218chksum_ok) != 1) {
+		return (-1);
+	}
+	writew(0, baseAddr + C218_key);
+	for (i = 0; i < 100; i++) {
+		if (readw(baseAddr + Magic_no) == Magic_code)
+			break;
+		moxadelay(1);	/* delay 10 ms */
+	}
+	if (readw(baseAddr + Magic_no) != Magic_code) {
+		return (-1);
+	}
+	writew(1, baseAddr + Disable_IRQ);
+	writew(0, baseAddr + Magic_no);
+	for (i = 0; i < 100; i++) {
+		if (readw(baseAddr + Magic_no) == Magic_code)
+			break;
+		moxadelay(1);	/* delay 10 ms */
+	}
+	if (readw(baseAddr + Magic_no) != Magic_code) {
+		return (-1);
+	}
+	moxaCard = 1;
+	moxaIntNdx[cardno] = baseAddr + IRQindex;
+	moxaIntPend[cardno] = baseAddr + IRQpending;
+	moxaIntTable[cardno] = baseAddr + IRQtable;
+	return (0);
+}
+
+static int moxaloadc320(int cardno, unsigned long baseAddr, int len, int *numPorts)
+{
+	ushort usum;
+	int i, j, wlen, len2, retry;
+	ushort *uptr;
+
+	usum = 0;
+	wlen = len >> 1;
+	uptr = (ushort *) moxaBuff;
+	for (i = 0; i < wlen; i++)
+		usum += uptr[i];
+	retry = 0;
+	j = 0;
+	do {
+		while (wlen) {
+			if (wlen > 2048)
+				len2 = 2048;
+			else
+				len2 = wlen;
+			wlen -= len2;
+			len2 <<= 1;
+			for (i = 0; i < len2; i++)
+				writeb(moxaBuff[j + i], baseAddr + C320_LoadBuf + i);
+			len2 >>= 1;
+			j += i;
+			writew(len2, baseAddr + C320DLoad_len);
+			writew(0, baseAddr + C320_key);
+			for (i = 0; i < 10; i++) {
+				if (readw(baseAddr + C320_key) == C320_KeyCode)
+					break;
+				moxadelay(1);
+			}
+			if (readw(baseAddr + C320_key) != C320_KeyCode)
+				return (-1);
+		}
+		writew(0, baseAddr + C320DLoad_len);
+		writew(usum, baseAddr + C320check_sum);
+		writew(0, baseAddr + C320_key);
+		for (i = 0; i < 10; i++) {
+			if (readw(baseAddr + C320_key) == C320_KeyCode)
+				break;
+			moxadelay(1);
+		}
+		retry++;
+	} while ((readb(baseAddr + C320chksum_ok) != 1) && (retry < 3));
+	if (readb(baseAddr + C320chksum_ok) != 1)
+		return (-1);
+	writew(0, baseAddr + C320_key);
+	for (i = 0; i < 600; i++) {
+		if (readw(baseAddr + Magic_no) == Magic_code)
+			break;
+		moxadelay(1);
+	}
+	if (readw(baseAddr + Magic_no) != Magic_code)
+		return (-100);
+
+	if (moxa_boards[cardno].busType == MOXA_BUS_TYPE_PCI) {		/* ASIC board */
+		writew(0x3800, baseAddr + TMS320_PORT1);
+		writew(0x3900, baseAddr + TMS320_PORT2);
+		writew(28499, baseAddr + TMS320_CLOCK);
+	} else {
+		writew(0x3200, baseAddr + TMS320_PORT1);
+		writew(0x3400, baseAddr + TMS320_PORT2);
+		writew(19999, baseAddr + TMS320_CLOCK);
+	}
+	writew(1, baseAddr + Disable_IRQ);
+	writew(0, baseAddr + Magic_no);
+	for (i = 0; i < 500; i++) {
+		if (readw(baseAddr + Magic_no) == Magic_code)
+			break;
+		moxadelay(1);
+	}
+	if (readw(baseAddr + Magic_no) != Magic_code)
+		return (-102);
+
+	j = readw(baseAddr + Module_cnt);
+	if (j <= 0)
+		return (-101);
+	*numPorts = j * 8;
+	writew(j, baseAddr + Module_no);
+	writew(0, baseAddr + Magic_no);
+	for (i = 0; i < 600; i++) {
+		if (readw(baseAddr + Magic_no) == Magic_code)
+			break;
+		moxadelay(1);
+	}
+	if (readw(baseAddr + Magic_no) != Magic_code)
+		return (-102);
+	moxaCard = 1;
+	moxaIntNdx[cardno] = baseAddr + IRQindex;
+	moxaIntPend[cardno] = baseAddr + IRQpending;
+	moxaIntTable[cardno] = baseAddr + IRQtable;
+	return (0);
+}
+
+long MoxaPortGetCurBaud(int port)
+{
+
+	if (moxaChkPort[port] == 0)
+		return (0);
+	return (moxaCurBaud[port]);
+}
+
+static void MoxaSetFifo(int port, int enable)
+{
+	unsigned long ofsAddr = moxaTableAddr[port];
+
+	if (!enable) {
+		moxafunc(ofsAddr, FC_SetRxFIFOTrig, 0);
+		moxafunc(ofsAddr, FC_SetTxFIFOCnt, 1);
+	} else {
+		moxafunc(ofsAddr, FC_SetRxFIFOTrig, 3);
+		moxafunc(ofsAddr, FC_SetTxFIFOCnt, 16);
+	}
+}
+
+#if 0
+int MoxaPortSetMode(int port, int databits, int stopbits, int parity)
+{
+	unsigned long ofsAddr;
+	int val;
+
+	val = 0;
+	switch (databits) {
+	case 5:
+		val |= 0;
+		break;
+	case 6:
+		val |= 1;
+		break;
+	case 7:
+		val |= 2;
+		break;
+	case 8:
+		val |= 3;
+		break;
+	default:
+		return (-1);
+	}
+	switch (stopbits) {
+	case 0:
+		val |= 0;
+		break;		/* stop bits 1.5 */
+	case 1:
+		val |= 0;
+		break;
+	case 2:
+		val |= 4;
+		break;
+	default:
+		return (-1);
+	}
+	switch (parity) {
+	case 0:
+		val |= 0x00;
+		break;		/* None  */
+	case 1:
+		val |= 0x08;
+		break;		/* Odd   */
+	case 2:
+		val |= 0x18;
+		break;		/* Even  */
+	case 3:
+		val |= 0x28;
+		break;		/* Mark  */
+	case 4:
+		val |= 0x38;
+		break;		/* Space */
+	default:
+		return (-1);
+	}
+	ofsAddr = moxaTableAddr[port];
+	moxafunc(ofsAddr, FC_SetMode, val);
+	return (0);
+}
+
+int MoxaPortTxBufSize(int port)
+{
+	unsigned long ofsAddr;
+	int size;
+
+	ofsAddr = moxaTableAddr[port];
+	size = readw(ofsAddr + TX_mask);
+	return (size);
+}
+
+int MoxaPortRxBufSize(int port)
+{
+	unsigned long ofsAddr;
+	int size;
+
+	ofsAddr = moxaTableAddr[port];
+	size = readw(ofsAddr + RX_mask);
+	return (size);
+}
+
+int MoxaPortRxFree(int port)
+{
+	unsigned long ofsAddr;
+	ushort rptr, wptr, mask;
+	int len;
+
+	ofsAddr = moxaTableAddr[port];
+	rptr = readw(ofsAddr + RXrptr);
+	wptr = readw(ofsAddr + RXwptr);
+	mask = readw(ofsAddr + RX_mask);
+	len = mask - ((wptr - rptr) & mask);
+	return (len);
+}
+int MoxaPortGetBrkCnt(int port)
+{
+	return (moxaBreakCnt[port]);
+}
+
+void MoxaPortSetXonXoff(int port, int xonValue, int xoffValue)
+{
+	unsigned long ofsAddr;
+
+	ofsAddr = moxaTableAddr[port];
+	writew(xonValue, ofsAddr + FuncArg);
+	writew(xoffValue, ofsAddr + FuncArg1);
+	writew(FC_SetXonXoff, ofsAddr + FuncCode);
+	wait_finish(ofsAddr);
+}
+
+int MoxaPortIsTxHold(int port)
+{
+	unsigned long ofsAddr;
+	int val;
+
+	ofsAddr = moxaTableAddr[port];
+	if ((moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_ISA) ||
+	    (moxa_boards[port / MAX_PORTS_PER_BOARD].boardType == MOXA_BOARD_C320_PCI)) {
+		moxafunc(ofsAddr, FC_GetCCSR, 0);
+		val = readw(ofsAddr + FuncArg);
+		if (val & 0x04)
+			return (1);
+	} else {
+		if (readw(ofsAddr + FlagStat) & Tx_flowOff)
+			return (1);
+	}
+	return (0);
+}
+#endif

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)