patch-2.2.14 linux/drivers/net/sk98lin/Makefile

Next file: linux/drivers/net/sk98lin/h/lm80.h
Previous file: linux/drivers/net/sis900.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.2.13/linux/drivers/net/sk98lin/Makefile linux/drivers/net/sk98lin/Makefile
@@ -0,0 +1,80 @@
+# File: drivers/sk98lin/Makefile
+#
+# Makefile for the SysKonnect SK-98xx device driver.
+#
+
+ifeq ($(CONFIG_SK98LIN),y)
+    O_TARGET := sk98lin.o
+    O_OBJS = skge.o skaddr.o skgehwt.o skgeinit.o skgepnmi.o skgesirq.o \
+             ski2c.o sklm80.o skqueue.o skrlmt.o sktimer.o skvpd.o \
+             skxmac2.o skcsum.o
+else
+  ifeq ($(CONFIG_SK98LIN),m)
+    MOD_LIST_NAME := SK98LIN_MODULES
+    M_OBJS := sk98lin.o
+    O_TARGET := sk98lin.o
+    O_OBJS = skge.o skaddr.o skgehwt.o skgeinit.o skgepnmi.o skgesirq.o \
+             ski2c.o sklm80.o skqueue.o skrlmt.o sktimer.o skvpd.o \
+             skxmac2.o skcsum.o
+  endif
+endif
+
+# DBGDEF =  \
+# -DDEBUG
+
+ifdef DEBUG
+DBGDEF +=  \
+-DSK_DEBUG_CHKMOD=0x00000000L \
+-DSK_DEBUG_CHKCAT=0x00000000L
+endif
+
+
+# **** possible debug modules for SK_DEBUG_CHKMOD *****************
+# SK_DBGMOD_MERR        0x00000001L     /* general module error indication */
+# SK_DBGMOD_HWM         0x00000002L     /* Hardware init module */
+# SK_DBGMOD_RLMT        0x00000004L     /* RLMT module */
+# SK_DBGMOD_VPD         0x00000008L     /* VPD module */
+# SK_DBGMOD_I2C         0x00000010L     /* I2C module */
+# SK_DBGMOD_PNMI        0x00000020L     /* PNMI module */
+# SK_DBGMOD_CSUM        0x00000040L     /* CSUM module */
+# SK_DBGMOD_ADDR        0x00000080L     /* ADDR module */
+# SK_DBGMOD_DRV         0x00010000L     /* DRV module */
+
+# **** possible debug categories for SK_DEBUG_CHKCAT **************
+# *** common modules ***
+# SK_DBGCAT_INIT        0x00000001L     module/driver initialization
+# SK_DBGCAT_CTRL        0x00000002L     controlling: add/rmv MCA/MAC and other controls (IOCTL)
+# SK_DBGCAT_ERR         0x00000004L     error handling paths
+# SK_DBGCAT_TX          0x00000008L     transmit path
+# SK_DBGCAT_RX          0x00000010L     receive path
+# SK_DBGCAT_IRQ         0x00000020L     general IRQ handling
+# SK_DBGCAT_QUEUE       0x00000040L     any queue management
+# SK_DBGCAT_DUMP        0x00000080L     large data output e.g. hex dump
+# SK_DBGCAT_FATAL       0x00000100L     large data output e.g. hex dump
+
+# *** driver (file skge.c) ***
+# SK_DBGCAT_DRV_ENTRY           0x00010000      entry points
+# SK_DBGCAT_DRV_???             0x00020000      not used
+# SK_DBGCAT_DRV_MCA             0x00040000      multicast
+# SK_DBGCAT_DRV_TX_PROGRESS     0x00080000      tx path
+# SK_DBGCAT_DRV_RX_PROGRESS     0x00100000      rx path
+# SK_DBGCAT_DRV_PROGRESS        0x00200000      general runtime
+# SK_DBGCAT_DRV_???             0x00400000      not used
+# SK_DBGCAT_DRV_PROM            0x00800000      promiscuous mode
+# SK_DBGCAT_DRV_TX_FRAME        0x01000000      display tx frames
+# SK_DBGCAT_DRV_ERROR           0x02000000      error conditions
+# SK_DBGCAT_DRV_INT_SRC         0x04000000      interrupts sources
+# SK_DBGCAT_DRV_EVENT           0x08000000      driver events
+
+EXTRA_CFLAGS += -I. -DSK_USE_CSUM $(DBGDEF)
+
+include $(TOPDIR)/Rules.make
+
+clean:
+	rm -f core *.o *.a *.s
+
+
+
+
+
+

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)