patch-2.2.14 linux/drivers/net/sk98lin/h/skerror.h

Next file: linux/drivers/net/sk98lin/h/skgedrv.h
Previous file: linux/drivers/net/sk98lin/h/skdrv2nd.h
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.2.13/linux/drivers/net/sk98lin/h/skerror.h linux/drivers/net/sk98lin/h/skerror.h
@@ -0,0 +1,75 @@
+/******************************************************************************
+ *
+ * Name:	skerror.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.3 $
+ * Date:	$Date: 1999/09/14 14:04:42 $
+ * Purpose:	SK specific Error log support
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *	$Log: skerror.h,v $
+ *	Revision 1.3  1999/09/14 14:04:42  rwahl
+ *	Added error base SK_ERRBASE_PECP.
+ *	Changed error base for driver.
+ *	
+ *	Revision 1.2  1998/08/11 11:15:41  gklug
+ *	chg: comments
+ *	
+ *	Revision 1.1  1998/08/11 11:09:38  gklug
+ *	add: error bases
+ *	add: error Classes
+ *	first version
+ *	
+ *	
+ *
+ ******************************************************************************/
+
+#ifndef _INC_SKERROR_H_
+#define _INC_SKERROR_H_
+
+/*
+ * Define the Error Classes
+ */
+#define	SK_ERRCL_OTHER		(0)	/* Other error */
+#define	SK_ERRCL_CONFIG		(1L<<0)	/* Configuration error */
+#define	SK_ERRCL_INIT		(1L<<1)	/* Initialization error */
+#define	SK_ERRCL_NORES		(1L<<2)	/* Out of resources error */
+#define	SK_ERRCL_SW		(1L<<3)	/* internal Software error */
+#define	SK_ERRCL_HW		(1L<<4)	/* Hardware failure */
+#define	SK_ERRCL_COMM		(1L<<5)	/* Communication error */
+
+
+/*
+ * Define Error code bases
+ */
+#define	SK_ERRBASE_RLMT		100	/* Base Error number for RLMT */
+#define	SK_ERRBASE_HWINIT	200	/* Base Error number for HWInit */
+#define	SK_ERRBASE_VPD		300	/* Base Error number for VPD */
+#define	SK_ERRBASE_PNMI		400	/* Base Error number for PNMI */
+#define	SK_ERRBASE_CSUM		500	/* Base Error number for Checksum */
+#define	SK_ERRBASE_SIRQ		600	/* Base Error number for Special IRQ */
+#define	SK_ERRBASE_I2C		700	/* Base Error number for i2C module */
+#define	SK_ERRBASE_QUEUE	800	/* Base Error number for Scheduler */
+#define	SK_ERRBASE_ADDR		900	/* Base Error number for Address mod. */
+#define SK_ERRBASE_PECP		1000    /* Base Error number for PECP */
+#define	SK_ERRBASE_DRV		1100	/* Base Error number for Driver */
+
+#endif	/* _INC_SKERROR_H_ */

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)