patch-2.2.14 linux/drivers/net/sk98lin/skcsum.c

Next file: linux/drivers/net/sk98lin/skge.c
Previous file: linux/drivers/net/sk98lin/skaddr.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.2.13/linux/drivers/net/sk98lin/skcsum.c linux/drivers/net/sk98lin/skcsum.c
@@ -0,0 +1,847 @@
+/******************************************************************************
+ *
+ * Name:	skcsum.c
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.3 $
+ * Date:	$Date: 1999/05/10 08:39:33 $
+ * Purpose:	Store/verify Internet checksum in send/receive packets.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	See the file "skge.c" for further information.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ *	$Log: skcsum.c,v $
+ *	Revision 1.3  1999/05/10 08:39:33  mkarl
+ *	prevent overflows in SKCS_HTON16
+ *	fixed a bug in pseudo header checksum calculation
+ *	added some comments
+ *	
+ *	Revision 1.2  1998/10/22 11:53:28  swolf
+ *	Now using SK_DBG_MSG.
+ *	
+ *	Revision 1.1  1998/09/01 15:35:41  swolf
+ *	initial revision
+ *
+ *	13-May-1998 sw	Created.
+ *
+ ******************************************************************************/
+
+#ifdef SK_USE_CSUM	/* Check if CSUM is to be used. */
+
+#ifndef lint
+static const char SysKonnectFileId[] = "@(#)"
+	"$Id: skcsum.c,v 1.3 1999/05/10 08:39:33 mkarl Exp $"
+	" (C) SysKonnect.";
+#endif	/* !lint */
+
+/******************************************************************************
+ *
+ * Description:
+ *
+ * This is the "GEnesis" common module "CSUM".
+ *
+ * This module contains the code necessary to calculate, store, and verify the
+ * Internet Checksum of IP, TCP, and UDP frames.
+ *
+ * "GEnesis" is an abbreviation of "Gigabit Ethernet Network System in Silicon"
+ * and is the code name of this SysKonnect project.
+ *
+ * Compilation Options:
+ *
+ *	SK_USE_CSUM - Define if CSUM is to be used. Otherwise, CSUM will be an
+ *	empty module.
+ *
+ *	SKCS_OVERWRITE_PROTO - Define to overwrite the default protocol id
+ *	definitions. In this case, all SKCS_PROTO_xxx definitions must be made
+ *	external.
+ *
+ *	SKCS_OVERWRITE_STATUS - Define to overwrite the default return status
+ *	definitions. In this case, all SKCS_STATUS_xxx definitions must be made
+ *	external.
+ *
+ * Include File Hierarchy:
+ *
+ *	"h/skdrv1st.h"
+ *	"h/skcsum.h"
+ *	 "h/sktypes.h"
+ *	 "h/skqueue.h"
+ *	"h/skdrv2nd.h"
+ *
+ ******************************************************************************/
+
+#include "h/skdrv1st.h"
+#include "h/skcsum.h"
+#include "h/skdrv2nd.h"
+
+/* defines ********************************************************************/
+
+/* The size of an Ethernet MAC header. */
+#define SKCS_ETHERNET_MAC_HEADER_SIZE	(6+6+2)
+
+/* The size of the used topology's MAC header. */
+#define	SKCS_MAC_HEADER_SIZE	SKCS_ETHERNET_MAC_HEADER_SIZE
+
+/* The size of the IP header without any option fields. */
+#define SKCS_IP_HEADER_SIZE	20
+
+/*
+ * Field offsets within the IP header.
+ */
+
+/* "Internet Header Version" and "Length". */
+#define SKCS_OFS_IP_HEADER_VERSION_AND_LENGTH	0
+
+/* "Total Length". */
+#define SKCS_OFS_IP_TOTAL_LENGTH		2
+
+/* "Flags" "Fragment Offset". */
+#define SKCS_OFS_IP_FLAGS_AND_FRAGMENT_OFFSET	6
+
+/* "Next Level Protocol" identifier. */
+#define SKCS_OFS_IP_NEXT_LEVEL_PROTOCOL		9
+
+/* Source IP address. */
+#define SKCS_OFS_IP_SOURCE_ADDRESS		12
+
+/* Destination IP address. */
+#define SKCS_OFS_IP_DESTINATION_ADDRESS		16
+
+/* IP "Next Level Protocol" identifiers (see RFC 790). */
+#define SKCS_PROTO_ID_TCP	6	/* Transport Control Protocol */
+#define SKCS_PROTO_ID_UDP	17	/* User Datagram Protocol */
+
+/* IP "Don't Fragment" bit. */
+#define SKCS_IP_DONT_FRAGMENT	SKCS_HTON16(0x4000)
+
+/* Add a byte offset to a pointer. */
+#define SKCS_IDX(pPtr, Ofs)	((void *) ((char *) (pPtr) + (Ofs)))
+
+/*
+ * Macros that convert host to network representation and vice versa, i.e.
+ * little/big endian conversion on little endian machines only.
+ */
+#ifdef SK_LITTLE_ENDIAN
+#define SKCS_HTON16(Val16)	(((unsigned) (Val16) >> 8) | (((Val16) & 0xFF) << 8))
+#endif	/* SK_LITTLE_ENDIAN */
+#ifdef SK_BIG_ENDIAN
+#define SKCS_HTON16(Val16)	(Val16)
+#endif	/* SK_BIG_ENDIAN */
+#define SKCS_NTOH16(Val16)	SKCS_HTON16(Val16)
+
+/* typedefs *******************************************************************/
+
+/* function prototypes ********************************************************/
+
+/******************************************************************************
+ *
+ *	SkCsGetSendInfo - get checksum information for a send packet
+ *
+ * Description:
+ *	Get all checksum information necessary to send a TCP or UDP packet. The
+ *	function checks the IP header passed to it. If the high-level protocol
+ *	is either TCP or UDP the pseudo header checksum is calculated and
+ *	returned.
+ *
+ *	The function returns the total length of the IP header (including any
+ *	IP option fields), which is the same as the start offset of the IP data
+ *	which in turn is the start offset of the TCP or UDP header.
+ *
+ *	The function also returns the TCP or UDP pseudo header checksum, which
+ *	should be used as the start value for the hardware checksum calculation.
+ *	(Note that any actual pseudo header checksum can never calculate to
+ *	zero.)
+ *
+ * Note:
+ *	There is a bug in the ASIC whic may lead to wrong checksums.
+ *
+ * Arguments:
+ *	pAc - A pointer to the adapter context struct.
+ *
+ *	pIpHeader - Pointer to IP header. Must be at least the IP header *not*
+ *	including any option fields, i.e. at least 20 bytes.
+ *
+ *	Note: This pointer will be used to address 8-, 16-, and 32-bit
+ *	variables with the respective alignment offsets relative to the pointer.
+ *	Thus, the pointer should point to a 32-bit aligned address. If the
+ *	target system cannot address 32-bit variables on non 32-bit aligned
+ *	addresses, then the pointer *must* point to a 32-bit aligned address.
+ *
+ *	pPacketInfo - A pointer to the packet information structure for this
+ *	packet. Before calling this SkCsGetSendInfo(), the following field must
+ *	be initialized:
+ *
+ *		ProtocolFlags - Initialize with any combination of
+ *		SKCS_PROTO_XXX bit flags. SkCsGetSendInfo() will only work on
+ *		the protocols specified here. Any protocol(s) not specified
+ *		here will be ignored.
+ *
+ *		Note: Only one checksum can be calculated in hardware. Thus, if
+ *		SKCS_PROTO_IP is specified in the 'ProtocolFlags',
+ *		SkCsGetSendInfo() must calculate the IP header checksum in
+ *		software. It might be a better idea to have the calling
+ *		protocol stack calculate the IP header checksum.
+ *
+ * Returns: N/A
+ *	On return, the following fields in 'pPacketInfo' may or may not have
+ *	been filled with information, depending on the protocol(s) found in the
+ *	packet:
+ *
+ *	ProtocolFlags - Returns the SKCS_PROTO_XXX bit flags of the protocol(s)
+ *	that were both requested by the caller and actually found in the packet.
+ *	Protocol(s) not specified by the caller and/or not found in the packet
+ *	will have their respective SKCS_PROTO_XXX bit flags reset.
+ *
+ *	Note: For IP fragments, TCP and UDP packet information is ignored.
+ *
+ *	IpHeaderLength - The total length in bytes of the complete IP header
+ *	including any option fields is returned here. This is the start offset
+ *	of the IP data, i.e. the TCP or UDP header if present.
+ *
+ *	IpHeaderChecksum - If IP has been specified in the 'ProtocolFlags', the
+ *	16-bit Internet Checksum of the IP header is returned here. This value
+ *	is to be stored into the packet's 'IP Header Checksum' field.
+ *
+ *	PseudoHeaderChecksum - If this is a TCP or UDP packet and if TCP or UDP
+ *	has been specified in the 'ProtocolFlags', the 16-bit Internet Checksum
+ *	of the TCP or UDP pseudo header is returned here.
+ */
+void SkCsGetSendInfo(
+SK_AC			*pAc,		/* Adapter context struct. */
+void			*pIpHeader,	/* IP header. */
+SKCS_PACKET_INFO	*pPacketInfo)	/* Packet information struct. */
+{
+	/* Internet Header Version found in IP header. */
+	unsigned InternetHeaderVersion;
+
+	/* Length of the IP header as found in IP header. */
+	unsigned IpHeaderLength;
+
+	/* Bit field specifiying the desired/found protocols. */
+	unsigned ProtocolFlags;
+
+	/* Next level protocol identifier found in IP header. */
+	unsigned NextLevelProtocol;
+
+	/* Length of IP data portion. */
+	unsigned IpDataLength;
+
+	/* TCP/UDP pseudo header checksum. */
+	unsigned long PseudoHeaderChecksum;
+
+	/* Pointer to next level protocol statistics structure. */
+	SKCS_PROTO_STATS *NextLevelProtoStats;
+
+	/* Temporary variable. */
+	unsigned Tmp;
+
+	Tmp = *(SK_U8 *)
+		SKCS_IDX(pIpHeader, SKCS_OFS_IP_HEADER_VERSION_AND_LENGTH);
+
+	/* Get the Internet Header Version (IHV). */
+	/* Note: The IHV is stored in the upper four bits. */
+
+	InternetHeaderVersion = Tmp >> 4;
+
+	/* Check the Internet Header Version. */
+	/* Note: We currently only support IP version 4. */
+
+	if (InternetHeaderVersion != 4) {	/* IPv4? */
+		SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_TX,
+			("Tx: Unknown Internet Header Version %u.\n",
+			InternetHeaderVersion));
+		pPacketInfo->ProtocolFlags = 0;
+		pAc->Csum.ProtoStats[SKCS_PROTO_STATS_IP].TxUnableCts++;
+		return;
+	}
+
+	/* Get the IP header length (IHL). */
+	/*
+	 * Note: The IHL is stored in the lower four bits as the number of
+	 * 4-byte words.
+	 */
+
+	IpHeaderLength = (Tmp & 0xf) * 4;
+	pPacketInfo->IpHeaderLength = IpHeaderLength;
+
+	/* Check the IP header length. */
+
+	/* 04-Aug-1998 sw - Really check the IHL? Necessary? */
+
+	if (IpHeaderLength < 5*4) {
+		SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_TX,
+			("Tx: Invalid IP Header Length %u.\n", IpHeaderLength));
+		pPacketInfo->ProtocolFlags = 0;
+		pAc->Csum.ProtoStats[SKCS_PROTO_STATS_IP].TxUnableCts++;
+		return;
+	}
+
+	/* This is an IPv4 frame with a header of valid length. */
+
+	pAc->Csum.ProtoStats[SKCS_PROTO_STATS_IP].TxOkCts++;
+
+	/* Check if we should calculate the IP header checksum. */
+
+	ProtocolFlags = pPacketInfo->ProtocolFlags;
+
+	if (ProtocolFlags & SKCS_PROTO_IP) {
+		pPacketInfo->IpHeaderChecksum =
+			SkCsCalculateChecksum(pIpHeader, IpHeaderLength);
+	}
+
+	/* Get the next level protocol identifier. */
+
+	NextLevelProtocol =
+		*(SK_U8 *) SKCS_IDX(pIpHeader, SKCS_OFS_IP_NEXT_LEVEL_PROTOCOL);
+
+	/*
+	 * Check if this is a TCP or UDP frame and if we should calculate the
+	 * TCP/UDP pseudo header checksum.
+	 *
+	 * Also clear all protocol bit flags of protocols not present in the
+	 * frame.
+	 */
+
+	if ((ProtocolFlags & SKCS_PROTO_TCP) != 0 &&
+		NextLevelProtocol == SKCS_PROTO_ID_TCP) {
+		/* TCP/IP frame. */
+		ProtocolFlags &= SKCS_PROTO_TCP | SKCS_PROTO_IP;
+		NextLevelProtoStats =
+			&pAc->Csum.ProtoStats[SKCS_PROTO_STATS_TCP];
+	}
+	else if ((ProtocolFlags & SKCS_PROTO_UDP) != 0 &&
+		NextLevelProtocol == SKCS_PROTO_ID_UDP) {
+		/* UDP/IP frame. */
+		ProtocolFlags &= SKCS_PROTO_UDP | SKCS_PROTO_IP;
+		NextLevelProtoStats =
+			&pAc->Csum.ProtoStats[SKCS_PROTO_STATS_UDP];
+	}
+	else {
+		/*
+		 * Either not a TCP or UDP frame and/or TCP/UDP processing not
+		 * specified.
+		 */
+		pPacketInfo->ProtocolFlags = ProtocolFlags & SKCS_PROTO_IP;
+		return;
+	}
+
+	/* Check if this is an IP fragment. */
+
+	/*
+	 * Note: An IP fragment has a non-zero "Fragment Offset" field and/or
+	 * the "More Fragments" bit set. Thus, if both the "Fragment Offset"
+	 * and the "More Fragments" are zero, it is *not* a fragment. We can
+	 * easily check both at the same time since they are in the same 16-bit
+	 * word.
+	 */
+
+	if ((*(SK_U16 *)
+		SKCS_IDX(pIpHeader, SKCS_OFS_IP_FLAGS_AND_FRAGMENT_OFFSET) &
+		~SKCS_IP_DONT_FRAGMENT) != 0) {
+		/* IP fragment; ignore all other protocols. */
+		pPacketInfo->ProtocolFlags = ProtocolFlags & SKCS_PROTO_IP;
+		NextLevelProtoStats->TxUnableCts++;
+		return;
+	}
+
+	/*
+	 * Calculate the TCP/UDP pseudo header checksum.
+	 */
+
+	/* Get total length of IP header and data. */
+
+	IpDataLength =
+		*(SK_U16 *) SKCS_IDX(pIpHeader, SKCS_OFS_IP_TOTAL_LENGTH);
+
+	/* Get length of IP data portion. */
+
+	IpDataLength = SKCS_NTOH16(IpDataLength) - IpHeaderLength;
+
+	/* Calculate the sum of all pseudo header fields (16-bit). */
+
+	PseudoHeaderChecksum =
+		(unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
+			SKCS_OFS_IP_SOURCE_ADDRESS + 0) +
+		(unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
+			SKCS_OFS_IP_SOURCE_ADDRESS + 2) +
+		(unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
+			SKCS_OFS_IP_DESTINATION_ADDRESS + 0) +
+		(unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
+			SKCS_OFS_IP_DESTINATION_ADDRESS + 2) +
+		(unsigned long) (NextLevelProtocol << 8) +
+		(unsigned long) SKCS_HTON16(IpDataLength);
+
+	/* Add-in any carries. */
+
+	SKCS_OC_ADD(PseudoHeaderChecksum, PseudoHeaderChecksum, 0);
+
+	/* Add-in any new carry. */
+
+	SKCS_OC_ADD(pPacketInfo->PseudoHeaderChecksum, PseudoHeaderChecksum, 0);
+
+	NextLevelProtoStats->TxOkCts++;	/* Success. */
+}
+
+/******************************************************************************
+ *
+ *	SkCsGetReceiveInfo - verify checksum information for a received packet
+ *
+ * Description:
+ *	Verify a received frame's checksum. The function returns a status code
+ *	reflecting the result of the verification.
+ *
+ * Note:
+ *	Before calling this function you have to verify that the frame is
+ *	not padded and Checksum1 and Checksum2 are bigger than 1.
+ *
+ * Arguments:
+ *	pAc - Pointer to adapter context struct.
+ *
+ *	pIpHeader - Pointer to IP header. Must be at least the length in bytes
+ *	of the received IP header including any option fields.
+ *
+ *	Note: The actual length of the IP header is stored in the lower four
+ *	bits of the first octet of the IP header as the number of 4-byte words,
+ *	so it must be multiplied by four to get the length in bytes. Thus, the
+ *	maximum IP header length is 15 * 4 = 60 bytes.
+ *
+ *	Checksum1 - The first 16-bit Internet Checksum calculated by the
+ *	hardware starting at the offset returned by SkCsSetReceiveFlags().
+ *
+ *	Checksum2 - The second 16-bit Internet Checksum calculated by the
+ *	hardware starting at the offset returned by SkCsSetReceiveFlags().
+ *
+ * Returns:
+ *	SKCS_STATUS_UNKNOWN_IP_VERSION - Not an IP v4 frame.
+ *	SKCS_STATUS_IP_CSUM_ERROR - IP checksum error.
+ *	SKCS_STATUS_IP_FRAGMENT - IP fragment (IP checksum ok).
+ *	SKCS_STATUS_IP_CSUM_OK - IP checksum ok (not a TCP or UDP frame).
+ *	SKCS_STATUS_TCP_CSUM_ERROR - TCP checksum error (IP checksum ok).
+ *	SKCS_STATUS_UDP_CSUM_ERROR - UDP checksum error (IP checksum ok).
+ *	SKCS_STATUS_TCP_CSUM_OK - IP and TCP checksum ok.
+ *	SKCS_STATUS_UDP_CSUM_OK - IP and UDP checksum ok.
+ *
+ *	Note: The SKCS_STATUS_XXX values returned here are *not* defined by
+ *	the CSUM module but must be defined in some header file by the module
+ *	using CSUM. In this way, the calling module can assign return values
+ *	for its own needs, e.g. by assigning bit flags to the individual
+ *	protocols.
+ */
+SKCS_STATUS SkCsGetReceiveInfo(
+SK_AC		*pAc,		/* Adapter context struct. */
+void		*pIpHeader,	/* IP header. */
+unsigned	Checksum1,	/* Hardware checksum 1. */
+unsigned	Checksum2)	/* Hardware checksum 2. */
+{
+	/* Internet Header Version found in IP header. */
+	unsigned InternetHeaderVersion;
+
+	/* Length of the IP header as found in IP header. */
+	unsigned IpHeaderLength;
+
+	/* Length of IP data portion. */
+	unsigned IpDataLength;
+
+	/* IP header checksum. */
+	unsigned IpHeaderChecksum;
+
+	/* IP header options checksum, if any. */
+	unsigned IpOptionsChecksum;
+
+	/* IP data checksum, i.e. TCP/UDP checksum. */
+	unsigned IpDataChecksum;
+
+	/* Next level protocol identifier found in IP header. */
+	unsigned NextLevelProtocol;
+
+	/* The checksum of the "next level protocol", i.e. TCP or UDP. */
+	unsigned long NextLevelProtocolChecksum;
+
+	/* Pointer to next level protocol statistics structure. */
+	SKCS_PROTO_STATS *NextLevelProtoStats;
+
+	/* Temporary variable. */
+	unsigned Tmp;
+
+	Tmp = *(SK_U8 *)
+		SKCS_IDX(pIpHeader, SKCS_OFS_IP_HEADER_VERSION_AND_LENGTH);
+
+	/* Get the Internet Header Version (IHV). */
+	/* Note: The IHV is stored in the upper four bits. */
+
+	InternetHeaderVersion = Tmp >> 4;
+
+	/* Check the Internet Header Version. */
+	/* Note: We currently only support IP version 4. */
+
+	if (InternetHeaderVersion != 4) {	/* IPv4? */
+		SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_RX,
+			("Rx: Unknown Internet Header Version %u.\n",
+			InternetHeaderVersion));
+		pAc->Csum.ProtoStats[SKCS_PROTO_STATS_IP].RxUnableCts++;
+		return (SKCS_STATUS_UNKNOWN_IP_VERSION);
+	}
+
+	/* Get the IP header length (IHL). */
+	/*
+	 * Note: The IHL is stored in the lower four bits as the number of
+	 * 4-byte words.
+	 */
+
+	IpHeaderLength = (Tmp & 0xf) * 4;
+
+	/* Check the IP header length. */
+
+	/* 04-Aug-1998 sw - Really check the IHL? Necessary? */
+
+	if (IpHeaderLength < 5*4) {
+		SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_RX,
+			("Rx: Invalid IP Header Length %u.\n", IpHeaderLength));
+		pAc->Csum.ProtoStats[SKCS_PROTO_STATS_IP].RxErrCts++;
+		return (SKCS_STATUS_IP_CSUM_ERROR);
+	}
+
+	/* This is an IPv4 frame with a header of valid length. */
+
+	/* Get the IP header and data checksum. */
+
+	IpDataChecksum = Checksum2;
+
+	/*
+	 * The IP header checksum is calculated as follows:
+	 *
+	 *	IpHeaderChecksum = Checksum1 - Checksum2
+	 */
+
+	SKCS_OC_SUB(IpHeaderChecksum, Checksum1, Checksum2);
+
+	/* Check if any IP header options. */
+
+	if (IpHeaderLength > SKCS_IP_HEADER_SIZE) {
+
+		/* Get the IP options checksum. */
+
+		IpOptionsChecksum = SkCsCalculateChecksum(
+			SKCS_IDX(pIpHeader, SKCS_IP_HEADER_SIZE),
+			IpHeaderLength - SKCS_IP_HEADER_SIZE);
+
+		/* Adjust the IP header and IP data checksums. */
+
+		SKCS_OC_ADD(IpHeaderChecksum,
+			IpHeaderChecksum, IpOptionsChecksum);
+
+		SKCS_OC_SUB(IpDataChecksum,
+			IpDataChecksum, IpOptionsChecksum);
+	}
+
+	/* Check if the IP header checksum is ok. */
+	/*
+	 * NOTE: We must check the IP header checksum even if the caller does
+	 * not want us to do so because we cannot do any further processing of
+	 * the packet without a valid IP checksum.
+	 */
+
+	if (IpHeaderChecksum != 0xFFFF) {
+		pAc->Csum.ProtoStats[SKCS_PROTO_STATS_IP].RxErrCts++;
+		return (SKCS_STATUS_IP_CSUM_ERROR);
+	}
+
+	/* Get the next level protocol identifier. */
+
+	NextLevelProtocol =
+		*(SK_U8 *) SKCS_IDX(pIpHeader, SKCS_OFS_IP_NEXT_LEVEL_PROTOCOL);
+
+	/*
+	 * Check if this is a TCP or UDP frame and if we should calculate the
+	 * TCP/UDP pseudo header checksum.
+	 *
+	 * Also clear all protocol bit flags of protocols not present in the
+	 * frame.
+	 */
+
+	if ((pAc->Csum.ReceiveFlags & SKCS_PROTO_TCP) != 0 &&
+		NextLevelProtocol == SKCS_PROTO_ID_TCP) {
+		/* TCP/IP frame. */
+		NextLevelProtoStats =
+			&pAc->Csum.ProtoStats[SKCS_PROTO_STATS_TCP];
+	}
+	else if ((pAc->Csum.ReceiveFlags & SKCS_PROTO_UDP) != 0 &&
+		NextLevelProtocol == SKCS_PROTO_ID_UDP) {
+		/* UDP/IP frame. */
+		NextLevelProtoStats =
+			&pAc->Csum.ProtoStats[SKCS_PROTO_STATS_UDP];
+	}
+	else {
+		/*
+		 * Either not a TCP or UDP frame and/or TCP/UDP processing not
+		 * specified.
+		 */
+		return (SKCS_STATUS_IP_CSUM_OK);
+	}
+
+	/* Check if this is an IP fragment. */
+
+	/*
+	 * Note: An IP fragment has a non-zero "Fragment Offset" field and/or
+	 * the "More Fragments" bit set. Thus, if both the "Fragment Offset"
+	 * and the "More Fragments" are zero, it is *not* a fragment. We can
+	 * easily check both at the same time since they are in the same 16-bit
+	 * word.
+	 */
+
+	if ((*(SK_U16 *)
+		SKCS_IDX(pIpHeader, SKCS_OFS_IP_FLAGS_AND_FRAGMENT_OFFSET) &
+		~SKCS_IP_DONT_FRAGMENT) != 0) {
+		/* IP fragment; ignore all other protocols. */
+		NextLevelProtoStats->RxUnableCts++;
+		return (SKCS_STATUS_IP_FRAGMENT);
+	}
+
+	/*
+	 * Calculate the TCP/UDP checksum.
+	 */
+
+	/* Get total length of IP header and data. */
+
+	IpDataLength =
+		*(SK_U16 *) SKCS_IDX(pIpHeader, SKCS_OFS_IP_TOTAL_LENGTH);
+
+	/* Get length of IP data portion. */
+
+	IpDataLength = SKCS_NTOH16(IpDataLength) - IpHeaderLength;
+
+	NextLevelProtocolChecksum =
+
+		/* Calculate the pseudo header checksum. */
+
+		(unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
+			SKCS_OFS_IP_SOURCE_ADDRESS + 0) +
+		(unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
+			SKCS_OFS_IP_SOURCE_ADDRESS + 2) +
+		(unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
+			SKCS_OFS_IP_DESTINATION_ADDRESS + 0) +
+		(unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
+			SKCS_OFS_IP_DESTINATION_ADDRESS + 2) +
+		(unsigned long) (NextLevelProtocol << 8) +
+		(unsigned long) SKCS_HTON16(IpDataLength) +
+
+		/* Add the TCP/UDP header checksum. */
+
+		(unsigned long) IpDataChecksum;
+
+	/* Add-in any carries. */
+
+	SKCS_OC_ADD(NextLevelProtocolChecksum, NextLevelProtocolChecksum, 0);
+
+	/* Add-in any new carry. */
+
+	SKCS_OC_ADD(NextLevelProtocolChecksum, NextLevelProtocolChecksum, 0);
+
+	/* Check if the TCP/UDP checksum is ok. */
+
+	if ((unsigned) NextLevelProtocolChecksum == 0xFFFF) {
+
+		/* TCP/UDP checksum ok. */
+
+		NextLevelProtoStats->RxOkCts++;
+
+		return (NextLevelProtocol == SKCS_PROTO_ID_TCP ?
+			SKCS_STATUS_TCP_CSUM_OK : SKCS_STATUS_UDP_CSUM_OK);
+	}
+	
+	/* TCP/UDP checksum error. */
+
+	NextLevelProtoStats->RxErrCts++;
+
+	return (NextLevelProtocol == SKCS_PROTO_ID_TCP ?
+		SKCS_STATUS_TCP_CSUM_ERROR : SKCS_STATUS_UDP_CSUM_ERROR);
+}
+
+/******************************************************************************
+ *
+ *	SkCsSetReceiveFlags - set checksum receive flags
+ *
+ * Description:
+ *	Use this function to set the various receive flags. According to the
+ *	protocol flags set by the caller, the start offsets within received
+ *	packets of the two hardware checksums are returned. These offsets must
+ *	be stored in all receive descriptors.
+ *
+ * Arguments:
+ *	pAc - Pointer to adapter context struct.
+ *
+ *	ReceiveFlags - Any combination of SK_PROTO_XXX flags of the protocols
+ *	for which the caller wants checksum information on received frames.
+ *
+ *	pChecksum1Offset - The start offset of the first receive descriptor
+ *	hardware checksum to be calculated for received frames is returned
+ *	here.
+ *
+ *	pChecksum2Offset - The start offset of the second receive descriptor
+ *	hardware checksum to be calculated for received frames is returned
+ *	here.
+ *
+ * Returns: N/A
+ *	Returns the two hardware checksum start offsets.
+ */
+void SkCsSetReceiveFlags(
+SK_AC		*pAc,			/* Adapter context struct. */
+unsigned	ReceiveFlags,		/* New receive flags. */
+unsigned	*pChecksum1Offset,	/* Offset for hardware checksum 1. */
+unsigned	*pChecksum2Offset)	/* Offset for hardware checksum 2. */
+{
+	/* Save the receive flags. */
+
+	pAc->Csum.ReceiveFlags = ReceiveFlags;
+
+	/* First checksum start offset is the IP header. */
+	*pChecksum1Offset = SKCS_MAC_HEADER_SIZE;
+
+	/*
+	 * Second checksum start offset is the IP data. Note that this may vary
+	 * if there are any IP header options in the actual packet.
+	 */
+	*pChecksum2Offset = SKCS_MAC_HEADER_SIZE + SKCS_IP_HEADER_SIZE;
+}
+
+#ifndef SkCsCalculateChecksum
+/******************************************************************************
+ *
+ *	SkCsCalculateChecksum - calculate checksum for specified data
+ *
+ * Description:
+ *	Calculate and return the 16-bit Internet Checksum for the specified
+ *	data.
+ *
+ * Arguments:
+ *	pData - Pointer to data for which the checksum shall be calculated.
+ *	Note: The pointer should be aligned on a 16-bit boundary.
+ *
+ *	Length - Length in bytes of data to checksum.
+ *
+ * Returns:
+ *	The 16-bit Internet Checksum for the specified data.
+ *
+ *	Note: The checksum is calculated in the machine's natural byte order,
+ *	i.e. little vs. big endian. Thus, the resulting checksum is different
+ *	for the same input data on little and big endian machines.
+ *
+ *	However, when written back to the network packet, the byte order is
+ *	always in correct network order.
+ */
+unsigned SkCsCalculateChecksum(
+void		*pData,		/* Data to checksum. */
+unsigned	Length)		/* Length of data. */
+{
+	SK_U16 *pU16;		/* Pointer to the data as 16-bit words. */
+	unsigned long Checksum;	/* Checksum; must be at least 32 bits. */
+
+	/* Sum up all 16-bit words. */
+
+	pU16 = (SK_U16 *) pData;
+	for (Checksum = 0; Length > 1; Length -= 2) {
+		Checksum += *pU16++;
+	}
+
+	/* If this is an odd number of bytes, add-in the last byte. */
+
+	if (Length > 0) {
+#ifdef SK_BIG_ENDIAN
+		/* Add the last byte as the high byte. */
+		Checksum += ((unsigned) *(SK_U8 *) pU16) << 8;
+#else	/* !SK_BIG_ENDIAN */
+		/* Add the last byte as the low byte. */
+		Checksum += *(SK_U8 *) pU16;
+#endif	/* !SK_BIG_ENDIAN */
+	}
+
+	/* Add-in any carries. */
+
+	SKCS_OC_ADD(Checksum, Checksum, 0);
+
+	/* Add-in any new carry. */
+
+	SKCS_OC_ADD(Checksum, Checksum, 0);
+
+	/* Note: All bits beyond the 16-bit limit are now zero. */
+
+	return ((unsigned) Checksum);
+}
+#endif /* SkCsCalculateChecksum */
+
+/******************************************************************************
+ *
+ *	SkCsEvent - the CSUM event dispatcher
+ *
+ * Description:
+ *	This is the event handler for the CSUM module.
+ *
+ * Arguments:
+ *	pAc - Pointer to adapter context.
+ *
+ *	Ioc - I/O context.
+ *
+ *	Event -	 Event id.
+ *
+ *	Param - Event dependent parameter.
+ *
+ * Returns:
+ *	The 16-bit Internet Checksum for the specified data.
+ *
+ *	Note: The checksum is calculated in the machine's natural byte order,
+ *	i.e. little vs. big endian. Thus, the resulting checksum is different
+ *	for the same input data on little and big endian machines.
+ *
+ *	However, when written back to the network packet, the byte order is
+ *	always in correct network order.
+ */
+int SkCsEvent(
+SK_AC		*pAc,	/* Pointer to adapter context. */
+SK_IOC		Ioc,	/* I/O context. */
+SK_U32		Event,	/* Event id. */
+SK_EVPARA	Param)	/* Event dependent parameter. */
+{
+	int ProtoIndex;
+
+	switch (Event) {
+	/*
+	 * Clear protocol statistics.
+	 *
+	 * Param - Protocol index, or -1 for all protocols.
+	 */
+	case SK_CSUM_EVENT_CLEAR_PROTO_STATS:
+
+		ProtoIndex = (int) Param.Para32[0];
+		if (ProtoIndex < 0) {	/* Clear for all protocols. */
+			memset(&pAc->Csum.ProtoStats[0], 0,
+				sizeof(pAc->Csum.ProtoStats));
+		}
+		else {			/* Clear for individual protocol. */
+			memset(&pAc->Csum.ProtoStats[ProtoIndex], 0,
+				sizeof(pAc->Csum.ProtoStats[ProtoIndex]));
+		}
+		break;
+	default:
+		break;
+	}
+	return (0);	/* Success. */
+}
+
+#endif	/* SK_USE_CSUM */

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)