/* * Copyright 1997-2000 by Robin Cutshaw * Copyright 2005 Adam Jackson * * Permission to use, copy, modify, distribute, and sell this software and its * documentation for any purpose is hereby granted without fee, provided that * the above copyright notice appear in all copies and that both that * copyright notice and this permission notice appear in supporting * documentation, and that the names of the authors not be used in * advertising or publicity pertaining to distribution of the software without * specific, written prior permission. The authors make no representations * about the suitability of this software for any purpose. It is provided * "as is" without express or implied warranty. * * THE AUTHORS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR * PERFORMANCE OF THIS SOFTWARE. */ /* Solid and Copy support derived from the i128 XAA code */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "exa.h" #include "miline.h" #include "servermd.h" #include "picture.h" #include "xf86.h" #include "xf86_OSproc.h" #include "xf86Pci.h" #include "i128.h" #include "i128reg.h" #define PI128_FROM_PIXMAP(x) \ I128Ptr pI128 = I128PTR(xf86ScreenToScrn(x->drawable.pScreen)) #define PI128_FROM_SCREEN(x) \ I128Ptr pI128 = I128PTR(xf86ScreenToScrn(x)) #define PI128_FROM_PICTURE(x) \ I128Ptr pI128 = I128PTR(xf86ScreenToScrn(x->pDrawable->pScreen)) /* we might be able to do something smarter than this */ #define ENG_PIPELINE_READY() \ while (pI128->mem.rbase_a[BUSY] & BUSY_BUSY) #define ENG_DONE() \ while (pI128->mem.rbase_a[FLOW] & (FLOW_DEB | FLOW_MCB | FLOW_PRV)) #if 1 #define I128_EXA_DEBUG(x) #else #define I128_EXA_DEBUG(x) ErrorF x #endif /* technically we should set the caches to bogus things during init... */ #define CACHE_DEBUG 0 #define CACHED_UPDATE(val, reg) \ do if (pI128->val != val) { \ if (CACHE_DEBUG) I128_EXA_DEBUG(("Updated cache for " #reg "\n")); \ pI128->mem.rbase_a[reg] = pI128->val = val; \ } while (0) static void i128SetBufCtrl(I128Ptr pI128, int dest_bpp) { unsigned int buf_ctrl; switch (dest_bpp) { case 8: buf_ctrl = BC_PSIZ_8B; break; case 16: buf_ctrl = BC_PSIZ_16B; break; case 24: case 32: buf_ctrl = BC_PSIZ_32B; break; default: buf_ctrl = 0; break; /* error */ } if (pI128->Chipset == PCI_CHIP_I128_T2R) { if (pI128->MemoryType == I128_MEMORY_SGRAM) buf_ctrl |= BC_MDM_PLN; else buf_ctrl |= BC_BLK_ENA; } CACHED_UPDATE(buf_ctrl, BUF_CTRL); } static const CARD32 i128alu[16] = { CR_CLEAR << 8, CR_AND << 8, CR_AND_REV << 8, CR_COPY << 8, CR_AND_INV << 8, CR_NOOP << 8, CR_XOR << 8, CR_OR << 8, CR_NOR << 8, CR_EQUIV << 8, CR_INVERT << 8, CR_OR_REV << 8, CR_COPY_INV << 8, CR_OR_INV << 8, CR_NAND << 8, CR_SET << 8 }; /* 8bpp 16bpp 32bpp unused */ static const int min_size[] = { 0x62, 0x32, 0x1A, 0x00 }; static const int max_size[] = { 0x80, 0x40, 0x20, 0x00 }; static const int split_size[] = { 0x20, 0x10, 0x08, 0x00 }; /* * this is the workhorse for our solid and copy routines. this works because * when CS_SOLID is set, the color comes from the FORE register regardless of * the source pixmap coords. */ static void i128ExaBlit(PixmapPtr dst, int x1, int y1, int x2, int y2, int w, int h) { int wh; PI128_FROM_PIXMAP(dst); I128_EXA_DEBUG(("Blit: %d %d %d %d %d %d\n", x1, y1, x2, y2, w, h)); ENG_PIPELINE_READY(); /* * this deserves explanation. XY3_DIR == 0 means left to right, top to * bottom. setting bit zero (DIR_LR_BT) switches to bottom to top, and * setting bit one (DIR_RL_TB) switches to right to left. XXX rewrite me. */ if (pI128->blitdir & DIR_RL_TB) { /* right-to-left */ x1 += w; x1--; x2 += w; x2--; } if (pI128->blitdir & DIR_LR_BT) { /* bottom-to-top */ y1 += h; y1--; y2 += h; y2--; } if (pI128->Chipset == PCI_CHIP_I128) { int bppi; /* The I128-1 has a nasty bitblit bug * that occurs when dest is exactly 8 pages wide */ bppi = (pI128->mem.rbase_a[BUF_CTRL] & BC_PSIZ_MSK) >> 24; if ((w >= min_size[bppi]) && (w <= max_size[bppi])) { bppi = split_size[bppi]; #if 1 /* split method */ wh = (bppi << 16) | h; CACHED_UPDATE(wh, XY2_WH); pI128->mem.rbase_a[XY0_SRC] = (x1 << 16) | y1; MB; pI128->mem.rbase_a[XY1_DST] = (x2 << 16) | y2; MB; ENG_PIPELINE_READY(); w -= bppi; if (pI128->blitdir & DIR_RL_TB) { /* right to left blit */ x1 -= bppi; x2 -= bppi; } else { /* left to right blit */ x1 += bppi; x2 += bppi; } #else /* clip method */ pI128->mem.rbase_a[CLPTL] = (x2 << 16) | y2; pI128->mem.rbase_a[CLPBR] = ((x2 + w) << 16) | (y2 + h); w += bppi; #endif } } /* this is overkill, but you can never have too much overkill */ wh = (w << 16) | h; CACHED_UPDATE(wh, XY2_WH); pI128->mem.rbase_a[XY0_SRC] = (x1 << 16) | y1; MB; pI128->mem.rbase_a[XY1_DST] = (x2 << 16) | y2; MB; } static void i128WaitMarker(ScreenPtr pScreen, int Marker) { PI128_FROM_SCREEN(pScreen); ENG_DONE(); } static void i128SetPlanemask(I128Ptr pI128, Pixel p) { Pixel planemask; I128_EXA_DEBUG(("SetPlanemask: %d\n", (int)p)); if (p == -1) planemask = -1; else switch (pI128->bitsPerPixel) { case 8: planemask = p * 0x01010101; break; case 16: planemask = p * 0x00010001; break; default: planemask = p; break; } CACHED_UPDATE(planemask, MASK); } /* this should be superfluous... */ static void i128SetClip(I128Ptr pI128) { #if 0 pI128->clptl = pI128->mem.rbase_a[CLPTL] = 0x00000000; pI128->clpbr = pI128->mem.rbase_a[CLPBR] = (4095 << 16) | 2047; #endif } static void i128SetBlitDirection(I128Ptr pI128, int dx, int dy) { int blitdir; I128_EXA_DEBUG(("SetBlitDirection: %d %d\n", dx, dy)); if (dx < 0) { if (dy < 0) blitdir = DIR_RL_BT; else blitdir = DIR_RL_TB; } else { if (dy < 0) blitdir = DIR_LR_BT; else blitdir = DIR_LR_TB; } CACHED_UPDATE(blitdir, XY3_DIR); } static void i128SetRop(I128Ptr pI128, int alu, int solid) { int cmd; I128_EXA_DEBUG(("SetRop: %d %d\n", alu, solid)); cmd = i128alu[alu] | CO_BITBLT | (solid ? (CS_SOLID << 16) : 0); CACHED_UPDATE(cmd, CMD); } static void i128SetSourcePixmap(I128Ptr pI128, PixmapPtr src) { unsigned int sorg = exaGetPixmapOffset(src); unsigned int sptch = exaGetPixmapPitch(src); I128_EXA_DEBUG(("SetSourcePixmap: %x, %d\n", sorg, sptch)); CACHED_UPDATE(sorg, DE_SORG); CACHED_UPDATE(sptch, DE_SPTCH); } static void i128SetDestPixmap(I128Ptr pI128, PixmapPtr dst) { unsigned int dorg = exaGetPixmapOffset(dst); unsigned int dptch = exaGetPixmapPitch(dst); I128_EXA_DEBUG(("SetDestPixmap: %x, %d\n", dorg, dptch)); CACHED_UPDATE(dorg, DE_DORG); CACHED_UPDATE(dptch, DE_DPTCH); } static void i128SetTexture(I128Ptr pI128, PixmapPtr tex) { unsigned int torg = exaGetPixmapOffset(tex); unsigned int tptch = exaGetPixmapPitch(tex); I128_EXA_DEBUG(("SetTexture: %x, %d\n", torg, tptch)); CACHED_UPDATE(torg, LOD0_ORG); CACHED_UPDATE(tptch, DE_TPTCH); } static const int func_tab[13][2] = { /* source function, destination function */ { ABLEND_SRC_ZERO, ABLEND_DST_ZERO }, /* clear */ { ABLEND_SRC_ONE, ABLEND_DST_ZERO }, /* src */ { ABLEND_SRC_ZERO, ABLEND_DST_ONE }, /* dst */ { ABLEND_SRC_ONE, ABLEND_DST_OMSRC_ALPHA }, /* over */ { ABLEND_SRC_OMDST_ALPHA, ABLEND_DST_ONE }, /* overreverse */ { ABLEND_SRC_DST_ALPHA, ABLEND_DST_ZERO }, /* in */ { ABLEND_SRC_ZERO, ABLEND_DST_SRC_ALPHA }, /* inreverse */ { ABLEND_SRC_OMDST_ALPHA, ABLEND_DST_ZERO }, /* out */ { ABLEND_SRC_ZERO, ABLEND_DST_OMSRC_ALPHA }, /* outreverse */ { ABLEND_SRC_DST_ALPHA, ABLEND_DST_OMSRC_ALPHA }, /* atop */ { ABLEND_SRC_OMDST_ALPHA, ABLEND_DST_SRC_ALPHA }, /* atopreverse */ { ABLEND_SRC_OMDST_ALPHA, ABLEND_DST_OMSRC_ALPHA }, /* xor */ { ABLEND_SRC_ONE, ABLEND_DST_ONE } /* add */ }; static void i128SetAlphaForOp(I128Ptr pI128, int op, int enable) { int acntrl = 0; if (enable) { acntrl |= ACTL_BE; /* blend enable */ acntrl |= func_tab[op][0]; /* source factor */ acntrl |= func_tab[op][1]; /* dest_factor */ acntrl |= 0; /* ACTL_AMD; / * modulate alpha */ } else { acntrl = 0; } I128_EXA_DEBUG(("SetAlphaForOp: %d, %d\n", op, enable)); CACHED_UPDATE(acntrl, ACNTRL); } /* we don't need a finalizer, yet */ static void i128Done(PixmapPtr p) { I128_EXA_DEBUG(("Done\n\n")); return; } /* Solid */ static Bool i128PrepareSolid(PixmapPtr pPixmap, int alu, Pixel planemask, Pixel fg) { PI128_FROM_PIXMAP(pPixmap); ENG_PIPELINE_READY(); i128SetPlanemask(pI128, planemask); if (alu != GXclear && alu != GXset) pI128->mem.rbase_a[FORE] = fg; i128SetClip(pI128); i128SetBlitDirection(pI128, 1, 1); /* probably unnecessary/ignored */ i128SetAlphaForOp(pI128, 0, 0); i128SetRop(pI128, alu, 1); /* no need to set the source, the chip ignores it */ i128SetDestPixmap(pI128, pPixmap); return TRUE; } static void i128Solid(PixmapPtr pPixmap, int x1, int y1, int x2, int y2) { i128ExaBlit(pPixmap, 0, 0, x1, y1, x2 - x1, y2 - y1); } /* Copy */ static Bool i128PrepareCopy(PixmapPtr pSrcPixmap, PixmapPtr pDstPixmap, int dx, int dy, int alu, Pixel planemask) { PI128_FROM_PIXMAP(pSrcPixmap); ENG_PIPELINE_READY(); i128SetPlanemask(pI128, planemask); i128SetClip(pI128); i128SetBlitDirection(pI128, dx, dy); i128SetAlphaForOp(pI128, 0, 0); i128SetRop(pI128, alu, 0); i128SetSourcePixmap(pI128, pSrcPixmap); i128SetDestPixmap(pI128, pDstPixmap); return TRUE; } static void i128Copy(PixmapPtr pDstPixmap, int x1, int y1, int x2, int y2, int w, int h) { i128ExaBlit(pDstPixmap, x1, y1, x2, y2, w, h); } /* Composite */ static const struct source_format source_formats[] = { /* 32bpp */ { PICT_a8r8g8b8, 0x14, 0, 0 }, { PICT_x8r8g8b8, 0x14, 0, 1 }, #if 0 { PICT_a8b8g8r8, 0x14, 0, 0 }, { PICT_x8b8g8r8, 0x14, 0, 1 }, /* no direct 24bpp formats */ /* 16bpp */ { PICT_r5g6b5, 0x12, 0, 0 }, { PICT_b5g6r5, 0x12, 0, 0 }, { PICT_a1r5g5b5, 0x11, 0, 0 }, { PICT_x1r5g5b5, 0x11, 0, 1 }, { PICT_a1b5g5r5, 0x11, 0, 0 }, { PICT_x1b5g5r5, 0x11, 0, 1 }, { PICT_a4r4g4b4, 0x10, 0, 0 }, { PICT_x4r4g4b4, 0x10, 0, 1 }, { PICT_a4b4g4r4, 0x10, 0, 0 }, { PICT_x4b4g4r4, 0x10, 0, 1 }, /* 8bpp */ { PICT_a8, 0x21, 0, 0 }, { PICT_r3g3b2, 0x0D, 0, 0 }, { PICT_b2g3r3, 0x0D, 0, 0 }, { PICT_a2r2g2b2, 0x30, 0, 0 }, { PICT_a2b2g2r2, 0x30, 0, 0 }, /* 4bpp */ { PICT_a4, 0x20, 0, 0 }, #endif /* terminator */ { 0, 0, 0, 0 } }; static struct source_format * i128MapSourceFormat(int fmt) { struct source_format *f; for (f = (struct source_format *)source_formats; f->render_format; f++) if (f->render_format == fmt) return f; return NULL; } struct dest_format { int render_format; int i128_format; }; static const struct dest_format dest_formats[] = { { 0, 0 } }; #if 0 static struct dest_format * i128MapDestFormat(int fmt) { return NULL; } #endif /* Composite is probably t2r and t2r4 only */ static Bool i128CheckComposite(int op, PicturePtr pSrcPicture, PicturePtr pMaskPicture, PicturePtr pDstPicture) { PI128_FROM_PICTURE(pDstPicture); if (op >= PictOpSaturate) return FALSE; /* * no direct alpha mask support. we only have one TMU, so while we * can emulate it, we should emulate it in the generic EXA layer. */ if (pMaskPicture) return FALSE; /* when transforms added, be sure to check for linear/nearest */ if (pSrcPicture->transform && pSrcPicture->filter != PictFilterNearest) return FALSE; /* no support for external alpha */ if (pSrcPicture->alphaMap || pDstPicture->alphaMap) return FALSE; /* driver currently doesn't support repeating */ if (pSrcPicture->repeat) return FALSE; pI128->source = i128MapSourceFormat(pSrcPicture->format); if (!pI128->source) return FALSE; #if 0 if (!i128MapDestFormat(pDstPicture->format)) return FALSE; #endif return TRUE; } static Bool i128PrepareComposite(int op, PicturePtr pSrcPicture, PicturePtr pMaskPicture, PicturePtr pDstPicture, PixmapPtr pSrc, PixmapPtr pMask, PixmapPtr pDst) { unsigned int cmd; unsigned int tex_ctl = 0; unsigned int threedctl = 0; PI128_FROM_PIXMAP(pDst); /* 2D setup */ i128SetBufCtrl(pI128, pDst->drawable.bitsPerPixel); i128SetPlanemask(pI128, -1); i128SetSourcePixmap(pI128, pSrc); i128SetDestPixmap(pI128, pDst); /* TEX_INV command here? */ cmd = CO_TRIAN3D; CACHED_UPDATE(cmd, CMD); /* 3D setup */ i128SetTexture(pI128, pSrc); i128SetAlphaForOp(pI128, op, 1); /* it looks pointless to cache these, but we'll need it for DRI */ tex_ctl |= TEX_TM; /* enable texture mapping */ tex_ctl |= TEX_NMG | TEX_NMN; /* nearest interpolation */ tex_ctl |= 0; /* TEX_RM; / * modulate RGB */ CACHED_UPDATE(tex_ctl, TEX_CTL); threedctl |= 0; /* COMP_TRUE << TCTL_ZOP_SHIFT; / * always pass Z check */ threedctl |= TCTL_ABS; /* enable alpha blend */ threedctl |= TCTL_TBS; /* enable texture blend */ threedctl |= TCTL_RT; /* draw textured rectangle */ CACHED_UPDATE(threedctl, THREEDCTL); return TRUE; } static void i128Composite(PixmapPtr pDst, int srcX, int srcY, int maskX, int maskY, int dstX, int dstY, int width, int height) { PI128_FROM_PIXMAP(pDst); /* * vertex setup. vertex layout must be: * V0 V1 * V2 (V3 is implicit) */ pI128->mem.rbase_af[V0_X] = 0.0; pI128->mem.rbase_af[V0_Y] = 0.0; pI128->mem.rbase_af[V0_W] = 1.0; pI128->mem.rbase_af[V0_U] = 0.0; pI128->mem.rbase_af[V0_V] = 0.0; pI128->mem.rbase_af[V1_X] = 300.0; pI128->mem.rbase_af[V1_Y] = 0.0; pI128->mem.rbase_af[V1_W] = 1.0; pI128->mem.rbase_af[V1_U] = 1.0; pI128->mem.rbase_af[V1_V] = 0.0; pI128->mem.rbase_af[V2_X] = 0.0; pI128->mem.rbase_af[V2_Y] = 300.0; pI128->mem.rbase_af[V2_W] = 1.0; pI128->mem.rbase_af[V2_U] = 0.0; pI128->mem.rbase_af[V2_V] = 1.0; /* and fire */ pI128->mem.rbase_a[TRIGGER3D] = 1; MB; #if 0 static int i = 0; /* test for raster */ if (!(i = (i + 1) % 32)) { ErrorF("Composite test: %d %d %d %d %d %d\n", srcX, srcY, dstX, dstY, width, height); } i128SetRop(pI128, GXxor, 0); i128ExaBlit(pDst, srcX, srcY, dstX, dstY, width, height); #endif } #if 0 /* * upload and download will require a DRM. AGP DMA only works on T2R4, and * then only for upload. we could probably use memory windows on other chips, * but those have goofy alignment restrictions and need to be disabled when * not in use. */ static Bool i128DownloadFromScreen(PixmapPtr pSrc, int x, int y, int w, int h, char *dst, int dst_pitch) { } static Bool i128UploadToScreen(PixmapPtr pDst, int x, int y, int w, int h, char *src, int src_pitch) { } #endif Bool I128ExaInit(ScreenPtr pScreen) { ExaDriverPtr pExa; ScrnInfoPtr pScrn = xf86ScreenToScrn(pScreen); I128Ptr pI128 = I128PTR(pScrn); if (!(pExa = exaDriverAlloc())) { pI128->NoAccel = TRUE; return FALSE; } pI128->ExaDriver = pExa; pExa->flags = EXA_OFFSCREEN_PIXMAPS | EXA_OFFSCREEN_ALIGN_POT; pExa->memoryBase = pI128->MemoryPtr; pExa->memorySize = pI128->MemorySize * 1024; pExa->offScreenBase = (pScrn->virtualX * pScrn->virtualY) * (pScrn->bitsPerPixel / 8) + 4096; /* these two are probably right */ pExa->pixmapOffsetAlign = 16; pExa->pixmapPitchAlign = 16; /* these two are guesses */ pExa->maxX = 2048; pExa->maxY = 2048; pExa->WaitMarker = i128WaitMarker; pExa->PrepareSolid = i128PrepareSolid; pExa->Solid = i128Solid; pExa->DoneSolid = i128Done; pExa->PrepareCopy = i128PrepareCopy; pExa->Copy = i128Copy; pExa->DoneCopy = i128Done; if (0 && (pI128->Chipset == PCI_CHIP_I128_T2R || pI128->Chipset == PCI_CHIP_I128_T2R4)) { #if 0 pExa->DownloadFromScreen = i128DownloadFromScreen; pExa->UploadToScreen = i128UploadToScreen; #endif pExa->CheckComposite = i128CheckComposite; pExa->PrepareComposite = i128PrepareComposite; pExa->Composite = i128Composite; pExa->DoneComposite = i128Done; } /* * XXX much of this is duplicated from the XAA code, but I expect the XAA * support to disappear eventually. */ pI128->buf_ctrl = 0; /* force write */ i128SetBufCtrl(pI128, pI128->bitsPerPixel); /* all of this needs to be properly documented */ { pI128->mem.rbase_a[DE_PGE] = 0x00; pI128->mem.rbase_a[DE_SORG] = pI128->displayOffset; pI128->mem.rbase_a[DE_DORG] = pI128->displayOffset; pI128->mem.rbase_a[DE_MSRC] = 0x00; pI128->mem.rbase_a[DE_WKEY] = 0x00; pI128->mem.rbase_a[DE_SPTCH] = pI128->mem.rbase_g[DB_PTCH]; pI128->mem.rbase_a[DE_DPTCH] = pI128->mem.rbase_g[DB_PTCH]; if (pI128->Chipset == PCI_CHIP_I128_T2R4) pI128->mem.rbase_a[DE_ZPTCH] = pI128->mem.rbase_g[DB_PTCH]; pI128->mem.rbase_a[RMSK] = 0x00000000; pI128->mem.rbase_a[XY4_ZM] = ZOOM_NONE; pI128->mem.rbase_a[LPAT] = 0xffffffff; /* for lines */ pI128->mem.rbase_a[PCTRL] = 0x00000000; /* for lines */ pI128->mem.rbase_a[CLPTL] = 0x00000000; pI128->mem.rbase_a[CLPBR] = (4095 << 16) | 2047 ; pI128->mem.rbase_a[ACNTRL] = 0x00000000; pI128->mem.rbase_a[INTM] = 0x03; } /* need this as a float * for vertex setup */ pI128->mem.rbase_af = (float *)pI128->mem.rbase_a; if (pI128->Debug) { xf86DrvMsg(pScrn->scrnIndex, X_INFO, "I128ExaInit done\n"); I128DumpActiveRegisters(pScrn); } return(exaDriverInit(pScreen, pExa)); }