# $XConsortium: Container2h.scr /main/4 1995/07/17 20:15:56 drk $
# @OPENGROUP_COPYRIGHT@
# COPYRIGHT NOTICE
# Copyright (c) 1990, 1991, 1992, 1993 Open Software Foundation, Inc.
# Copyright (c) 1996, 1997, 1998, 1999, 2000 The Open Group
# ALL RIGHTS RESERVED (MOTIF).  See the file named COPYRIGHT.MOTIF for
# the full copyright text.
# 
# This software is subject to an open license. It may only be
# used on, with or for operating systems which are themselves open
# source systems. You must contact The Open Group for a license
# allowing distribution and sublicensing of this software on, with,
# or for operating systems which are not Open Source programs.
# 
# See http://www.opengroup.org/openmotif/license for full
# details of the license agreement. Any use, reproduction, or
# distribution of the program constitutes recipient's acceptance of
# this agreement.
# 
# EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, THE PROGRAM IS
# PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, ANY
# WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY
# OR FITNESS FOR A PARTICULAR PURPOSE
# 
# EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, NEITHER RECIPIENT
# NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY DIRECT,
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE PROGRAM OR THE
# EXERCISE OF ANY RIGHTS GRANTED HEREUNDER, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGES.
# 
# 
# HISTORY

# #) This is Container2 testing EXTENDED_SELECT selectionPolicy in SPATIAL
#    layoutType.
# #) Select "ExtendedSelect" from the "Selection Policy" option menu.
# #) Select "Spatial" from the "Layout Type" option menu.
# #) Iconify the Control Panel.
# #) Resize the winfow to 400x450
# C)

LocatePointer SelectionPolicy_Option ROptionButton
PressMB Btn1
LocatePointer ExtendedSelect
ReleaseMB Btn1
LocatePointer LayoutType_Option ROptionButton
PressMB Btn1
LocatePointer Spatial
ReleaseMB Btn1
WindowIconify FormDialog
WindowResize Container2 SouthEast 400 450
CompareVisual Container2
Continue
 
# #) This panel is testing the Touch Click, Select Mode technique.
# #) Click Btn1 on "IconGad1". It should become selected.
# #) You should see the following in your term window:
# !)
#           Reason for SelectionCallback: CR_EXTENDED_SELECT
#           Number of items selected: 1
#           Names of items selected: IconGad1
# 
# #) Notice that the location cursor is a plain line rectangle.
# #) Click on "IconGad2". It should get selected, and "IconGad1" should 
#    become deselected. The location cursor is on "IconGad2".
# #) You should see the following in your term window:
# !)
#           Reason for SelectionCallback: CR_EXTENDED_SELECT
#           Number of items selected: 1
#           Names of items selected: IconGad2
# 
# C)
 
LocatePointer IconGad1
ClickMB Btn1
CompareVisual Container2
LocatePointer IconGad2
ClickMB Btn1
CompareVisual Container2
Continue

# #) Press Btn1 on "IconGad3", move the pointer over "IconGad4" and
#    release Btn1.
# #) As soon as you press Btn1 on "IconGad3", it gets selected, and 
#    "IconGad2" gets deselected.
# #) The location cursor is still on "IconGad3".
# #) When you release on "IconGad4", the following appears in your term 
#    window:
# !)
#           Reason for SelectionCallback: CR_EXTENDED_SELECT
#           Number of items selected: 2
#           Names of items selected: IconGad3 IconGad4
# 
# C)
 
LocatePointer IconGad3
PressMB Btn1
CompareVisual Container2
LocatePointer IconGad4
ReleaseMB Btn1
CompareVisual Container2
Continue

# #) Click in the background of Container. Everything gets deselected.
# #) You should see the following in your term window:
# !)
#           Reason for SelectionCallback: CR_EXTENDED_SELECT
#           Number of items selected: 0
#           Names of items selected: 
# 
# #) Press Btn1 in the background of Container, on the left and top
#    side of "IconGad1", move the pointer over "IconGad2" and
#    release Btn1 in the background of Container on the right and bottom
#    side of "IconGad2".
# #) As soon as you press Btn1 and start moving, you will see a marquee
#    rectangle. When "IconGad1" gets enclosed in the marquee rectangle, 
#    it gets selected.
# #) When moving over "IconGad2", and enclosing it in the marquee rectangle,
#    it gets also selected. 
# #) When you release on Btn1, the marquee rectangle should disappear.
#    the location cursor stays on "IconGad1", and the following appears 
#    in your term window:
# !)
#           Reason for SelectionCallback: CR_EXTENDED_SELECT
#           Number of items selected: 2
#           Names of items selected: IconGad1 IconGad2
# 
# #) Repeat the same action. But this time, don't release the mouse until
#    you come back from where you started.
# #) When pressing the mouse in the background of Container, notice that all
#    the icon gadgets are deselected. While moving, the icon gadgets are
#    selected when enclosed in the marquee, and deselected when coming back.
# #) When releasing the mouse, you should see in your term window:
# !)
#           Reason for SelectionCallback: CR_EXTENDED_SELECT
#           Number of items selected: 0
#           Names of items selected: 
# 
# C)

 
LocatePointerXYRel Container2 80 80
PressMB Btn1
CompareVisual Container2
LocatePointerXYRel Container2 110 110
CompareVisual Container2
LocatePointerXYRel Container2 290 250
ReleaseMB Btn1
CompareVisual Container2
LocatePointerXYRel Container2 80 80
PressMB Btn1
CompareVisual Container2
LocatePointerXYRel Container2 110 110
CompareVisual Container2
LocatePointerXYRel Container2 290 250
CompareVisual Container2
LocatePointerXYRel Container2 80 80
ReleaseMB Btn1
CompareVisual Container2
Continue
 
# #) Click BToggle on "IconGad3". It gets selected.
# #) Press BToggle on "IconGad1", move over "IconGad2" and release.
#    They become selected. The location cursor stays on "IconGad1".
# #) When you release on "IconGad2", the following appears in your term 
#    window:
# !)
#           Reason for SelectionCallback: CR_EXTENDED_SELECT
#           Number of items selected: 3
#           Names of items selected: IconGad1 IconGad2 IconGad3
# 
# #) Repeat the previous action to unselect "IconGad1" and "IconGad2".
#    The location cursor stays on "IconGad1".
# #) When you release on "IconGad2", the following appears in your term 
#    window:
# !)
#           Reason for SelectionCallback: CR_EXTENDED_SELECT
#           Number of items selected: 1
#           Names of items selected: IconGad3
# C)

LocatePointer IconGad3
ClickMB <Ctrl> Btn1
CompareVisual Container2
LocatePointer IconGad1
PressMB <Ctrl> Btn1
LocatePointer IconGad2
ReleaseMB <Ctrl> Btn1
CompareVisual Container2
LocatePointer IconGad1
PressMB <Ctrl> Btn1
LocatePointer IconGad2
ReleaseMB <Ctrl> Btn1
CompareVisual Container2
Continue

# #) Click BToggle in the background of Container. Nothing should happen.
# #) Press BToggle in the background of Container, on the left and top
#    side of "IconGad1", move the pointer over "IconGad2" and
#    release Btn1 in the background of Container on the right and bottom
#    side of "IconGad2".
# #) As soon as you press Btn1 and start moving, you will see a marquee
#    rectangle. When "IconGad1" gets enclosed in the marquee rectangle, 
#    it gets selected.
# #) When moving over "IconGad2", and enclosing it in the marquee rectangle,
#    it gets also selected. 
# #) When you release Btn1, the marquee rectangle should disappear.
#    the location cursor stays on "IconGad1", and the following appears 
#    in your term window:
# !)
#           Reason for SelectionCallback: CR_EXTENDED_SELECT
#           Number of items selected: 3
#           Names of items selected: IconGad1 IconGad2 IconGad3
# 
# #) Repeat the previous action to unselect "IconGad1" and "IconGad2".
# C)
 
LocatePointerXYRel Container2 80 80
ClickMB <Ctrl> Btn1
CompareVisual Container2
LocatePointerXYRel Container2 80 80
PressMB <Ctrl> Btn1
CompareVisual Container2
LocatePointerXYRel Container2 110 110
CompareVisual Container2
LocatePointerXYRel Container2 290 250
ReleaseMB Btn1
CompareVisual Container2
LocatePointerXYRel Container2 80 80
PressMB Btn1
CompareVisual Container2
LocatePointerXYRel Container2 110 110
CompareVisual Container2
LocatePointerXYRel Container2 290 250
ReleaseMB Btn1
CompareVisual Container2
Continue
 
# #) Click osfSelect. "IconGad1" gets selected. 
#    All the other icon gadgets are deselected.
# #) Click BToggle on "IconGad1". It gets deselected. 
# #) Using osfDown key, move the location cursor on "IconGad2". 
#    "IconGad2" gets selected.
# #) Using osfDown key, move the location cursor on "IconGad3". 
#    "IconGad3" gets selected, and "IconGad2" gets deselected.
# #) Using osfUp key, move the location cursor on "IconGad2". 
#    "IconGad2" gets selected, and "IconGad3" gets deselected.
# 
# C)

LocatePointer Container2
ClickKey KSelect
CompareVisual Container2
LocatePointer IconGad1
ClickMB <Ctrl> Btn1
CompareVisual Container2
ClickKey KDown
CompareVisual Container2
ClickKey KDown
CompareVisual Container2
ClickKey KUp
CompareVisual Container2
Continue
 
# E)
Exit