commit 3f2968010fda1eb82de1ff79c7384e3329f96673 Author: Greg Kroah-Hartman Date: Sun Apr 8 11:49:49 2018 +0200 Linux 3.18.103 commit b07a637f9ee352481e90b5452a5213139749697d Author: Greg Kroah-Hartman Date: Fri Apr 6 08:44:12 2018 +0200 Revert "ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin" This reverts commit 2d8c5aa6dc436f6fc1c8b6c0feaee4b0f60cdf38 which was comit e153db03c6b7a035c797bcdf35262586f003ee93 upstream. It requires a driver that was not merged until 4.16, so remove it from this stable tree as it is pointless. Reported-by: Ben Hutchings Cc: Andrew F. Davis Cc: Tony Lindgren Cc: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit fd96f5328421f5e815b74c4a7da56fceff7a43d4 Author: Greg Kroah-Hartman Date: Fri Apr 6 08:57:42 2018 +0200 Revert "ARM: dts: omap3-n900: Fix the audio CODEC's reset pin" This reverts commit 9d8df5594467b6c73c3833b462abe5811fe7295b which was commit 7be4b5dc7ffa9499ac6ef33a5ffa9ff43f9b7057 upstream. It requires a driver that was not merged until 4.16, so remove it from this stable tree as it is pointless. Reported-by: Ben Hutchings Cc: Andrew F. Davis Cc: Tony Lindgren Cc: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 2afca42b7fbbff84042c55ef25c8f7911c96194c Author: Greg Kroah-Hartman Date: Wed Apr 4 17:26:27 2018 +0200 Revert "PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown()" This reverts commit 058645e2f0647c85f2bfd577771546d198739fd2 which was commit fda78d7a0ead144f4b2cdb582dcba47911f4952c upstream. The dependancy tree is just too messy here, just drop it from this kernel as it's not really needed here. Reported-by: Ben Hutchings Cc: Prarit Bhargava Cc: Bjorn Helgaas Cc: Alex Williamson Cc: David Arcari Cc: Myron Stowe Cc: Lukas Wunner Cc: Keith Busch Cc: Mika Westerberg Cc: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ca240c0e0f3fb1562f676be199b737f8c2b54953 Author: Guoqing Jiang Date: Thu Apr 6 09:12:18 2017 +0800 md/raid10: reset the 'first' at the end of loop commit 6f287ca6046edd34ed83aafb7f9033c9c2e809e2 upstream. We need to set "first = 0' at the end of rdev_for_each loop, so we can get the array's min_offset_diff correctly otherwise min_offset_diff just means the last rdev's offset diff. [only the first chunk, due to b506335e5d2b ("md/raid10: skip spare disk as 'first' disk") being already applied - gregkh] Suggested-by: NeilBrown Signed-off-by: Guoqing Jiang Reviewed-by: NeilBrown Signed-off-by: Shaohua Li Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit a8642e3075fb6d05025e8df2f26750f96555e6c9 Author: Keerthy Date: Thu Apr 13 10:21:21 2017 +0530 ARM: dts: dra7: Add power hold and power controller properties to palmas commit 7c62de5f3fc92291decc0dac5f36949bdc3fb575 upstream. Add power hold and power controller properties to palmas node. This is needed to shutdown pmic correctly on boards with powerhold set. Signed-off-by: Keerthy Signed-off-by: Tony Lindgren Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit 047ade50b913d7b29f9980634ed9666829e8039b Author: Keerthy Date: Mon Nov 28 09:31:58 2016 +0530 Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition commit 0ea66f76ba17a4b229caaadd77de694111b21769 upstream. GPIO7 is configured in POWERHOLD mode which has higher priority over DEV_ON bit and keeps the PMIC supplies on even after the DEV_ON bit is turned off. This property enables driver to over ride the POWERHOLD value to GPIO7 so as to turn off the PMIC in power off scenarios. Signed-off-by: Keerthy Acked-by: Rob Herring Signed-off-by: Linus Walleij Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit 3307b7be1ffb3302a865074c4d5b94c2884c2ac8 Author: Mike Frysinger Date: Mon Jan 29 17:08:21 2018 -0500 vt: change SGR 21 to follow the standards commit 65d9982d7e523a1a8e7c9af012da0d166f72fc56 upstream. ECMA-48 [1] (aka ISO 6429) has defined SGR 21 as "doubly underlined" since at least March 1984. The Linux kernel has treated it as SGR 22 "normal intensity" since it was added in Linux-0.96b in June 1992. Before that, it was simply ignored. Other terminal emulators have either ignored it, or treat it as double underline now. xterm for example added support in its 304 release (May 2014) [2] where it was previously ignoring it. Changing this behavior shouldn't be an issue: - It isn't a named capability in ncurses's terminfo database, so no script is using libtinfo/libcurses to look this up, or using tput to query & output the right sequence. - Any script assuming SGR 21 will reset intensity in all terminals already do not work correctly on non-Linux VTs (including running under screen/tmux/etc...). - If someone has written a script that only runs in the Linux VT, and they're using SGR 21 (instead of SGR 22), the output should still be readable. imo it's important to change this as the Linux VT's non-conformance is sometimes used as an argument for other terminal emulators to not implement SGR 21 at all, or do so incorrectly. [1]: https://www.ecma-international.org/publications/standards/Ecma-048.htm [2]: https://github.com/ThomasDickey/xterm-snapshots/commit/2fd29cb98d214cb536bcafbee00bc73b3f1eeb9d Signed-off-by: Mike Frysinger Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 9b6f9e6fb7f183f43c6eae5780052d5b2230052d Author: Ondrej Zary Date: Tue Apr 3 10:24:34 2018 -0700 Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad commit 04bb1719c4de94700056241d4c0fe3c1413f5aff upstream. The touch sensor buttons on Sony VAIO VGN-CS series laptops (e.g. VGN-CS31S) are a separate PS/2 device. As the MUX is disabled for all VAIO machines by the nomux blacklist, the data from touch sensor buttons and touchpad are combined. The protocol used by the buttons is probably similar to the touchpad protocol (both are Synaptics) so both devices get enabled. The controller combines the data, creating a mess which results in random button clicks, touchpad stopping working and lost sync error messages: psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4 psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse serio1: issuing reconnect request Add a new i8042_dmi_forcemux_table whitelist with VGN-CS. With MUX enabled, touch sensor buttons are detected as separate device (and left disabled as there's currently no driver), fixing all touchpad problems. Signed-off-by: Ondrej Zary Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 7cbe0f9b5d862a3caef548977a50b6a2b12445ab Author: Dennis Wassenberg Date: Thu Mar 8 15:32:09 2018 -0800 Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list commit b56af54ac78c54a519d82813836f305d7f76ef27 upstream. Reset i8042 before probing because of insufficient BIOS initialisation of the i8042 serial controller. This makes Synaptics touchpad detection possible. Without resetting the Synaptics touchpad is not detected because there are always NACK messages from AUX port. Signed-off-by: Dennis Wassenberg Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit ddc867c1eea220ebd620107e43d0ff73a5a4dd56 Author: Andy Lutomirski Date: Fri Sep 30 10:58:57 2016 -0700 fs/proc: Stop trying to report thread stacks commit b18cb64ead400c01bf1580eeba330ace51f8087d upstream. This reverts more of: b76437579d13 ("procfs: mark thread stack correctly in proc//maps") ... which was partially reverted by: 65376df58217 ("proc: revert /proc//maps [stack:TID] annotation") Originally, /proc/PID/task/TID/maps was the same as /proc/TID/maps. In current kernels, /proc/PID/maps (or /proc/TID/maps even for threads) shows "[stack]" for VMAs in the mm's stack address range. In contrast, /proc/PID/task/TID/maps uses KSTK_ESP to guess the target thread's stack's VMA. This is racy, probably returns garbage and, on arches with CONFIG_TASK_INFO_IN_THREAD=y, is also crash-prone: KSTK_ESP is not safe to use on tasks that aren't known to be running ordinary process-context kernel code. This patch removes the difference and just shows "[stack]" for VMAs in the mm's stack range. This is IMO much more sensible -- the actual "stack" address really is treated specially by the VM code, and the current thread stack isn't even well-defined for programs that frequently switch stacks on their own. Reported-by: Jann Horn Signed-off-by: Andy Lutomirski Acked-by: Thomas Gleixner Cc: Al Viro Cc: Andrew Morton Cc: Borislav Petkov Cc: Brian Gerst Cc: Johannes Weiner Cc: Kees Cook Cc: Linus Torvalds Cc: Linux API Cc: Peter Zijlstra Cc: Tycho Andersen Link: http://lkml.kernel.org/r/3e678474ec14e0a0ec34c611016753eea2e1b8ba.1475257877.git.luto@kernel.org Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman commit 57b796481cd8fa9883ba3fa1114b74e5736c6afd Author: Johannes Weiner Date: Tue Feb 2 16:57:29 2016 -0800 proc: revert /proc//maps [stack:TID] annotation commit 65376df582174ffcec9e6471bf5b0dd79ba05e4a upstream. Commit b76437579d13 ("procfs: mark thread stack correctly in proc//maps") added [stack:TID] annotation to /proc//maps. Finding the task of a stack VMA requires walking the entire thread list, turning this into quadratic behavior: a thousand threads means a thousand stacks, so the rendering of /proc//maps needs to look at a million combinations. The cost is not in proportion to the usefulness as described in the patch. Drop the [stack:TID] annotation to make /proc//maps (and /proc//numa_maps) usable again for higher thread counts. The [stack] annotation inside /proc//task//maps is retained, as identifying the stack VMA there is an O(1) operation. Siddesh said: "The end users needed a way to identify thread stacks programmatically and there wasn't a way to do that. I'm afraid I no longer remember (or have access to the resources that would aid my memory since I changed employers) the details of their requirement. However, I did do this on my own time because I thought it was an interesting project for me and nobody really gave any feedback then as to its utility, so as far as I am concerned you could roll back the main thread maps information since the information is available in the thread-specific files" Signed-off-by: Johannes Weiner Cc: "Kirill A. Shutemov" Cc: Siddhesh Poyarekar Cc: Shaohua Li Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit fe0111391b214eeffdf6b380341ab0a1b97e6279 Author: Eric Biggers Date: Mon Feb 19 23:48:12 2018 -0800 crypto: x86/cast5-avx - fix ECB encryption when long sg follows short one commit 8f461b1e02ed546fbd0f11611138da67fd85a30f upstream. With ecb-cast5-avx, if a 128+ byte scatterlist element followed a shorter one, then the algorithm accidentally encrypted/decrypted only 8 bytes instead of the expected 128 bytes. Fix it by setting the encryption/decryption 'fn' correctly. Fixes: c12ab20b162c ("crypto: cast5/avx - avoid using temporary stack buffers") Cc: # v3.8+ Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 289156b8842c231008f5e979cc94d7b3a9792da8 Author: Herbert Xu Date: Mon Mar 26 08:53:25 2018 +0800 crypto: ahash - Fix early termination in hash walk commit 900a081f6912a8985dc15380ec912752cb66025a upstream. When we have an unaligned SG list entry where there is no leftover aligned data, the hash walk code will incorrectly return zero as if the entire SG list has been processed. This patch fixes it by moving onto the next page instead. Reported-by: Eli Cooper Cc: Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit bf6bb814e34c26116d62e467f36c8d282e9bab4d Author: Alexander Gerasiov Date: Sun Feb 4 02:50:22 2018 +0300 parport_pc: Add support for WCH CH382L PCI-E single parallel port card. commit 823f7923833c6cc2b16e601546d607dcfb368004 upstream. WCH CH382L is a PCI-E adapter with 1 parallel port. It is similair to CH382 but serial ports are not soldered on board. Detected as Serial controller: Device 1c00:3050 (rev 10) (prog-if 05 [16850]) Signed-off-by: Alexander Gerasiov Cc: stable Signed-off-by: Greg Kroah-Hartman commit d22df065dae66f6a892af8802961801deaa90356 Author: Oliver Neukum Date: Mon Jan 8 09:21:07 2018 -0500 media: usbtv: prevent double free in error case commit 50e7044535537b2a54c7ab798cd34c7f6d900bd2 upstream. Quoting the original report: It looks like there is a double-free vulnerability in Linux usbtv driver on an error path of usbtv_probe function. When audio registration fails, usbtv_video_free function ends up freeing usbtv data structure, which gets freed the second time under usbtv_video_fail label. usbtv_audio_fail: usbtv_video_free(usbtv); => v4l2_device_put(&usbtv->v4l2_dev); => v4l2_device_put => kref_put => v4l2_device_release => usbtv_release (CALLBACK) => kfree(usbtv) (1st time) usbtv_video_fail: usb_set_intfdata(intf, NULL); usb_put_dev(usbtv->udev); kfree(usbtv); (2nd time) So, as we have refcounting, use it Reported-by: Yavuz, Tuba Signed-off-by: Oliver Neukum CC: stable@vger.kernel.org Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit 89b1fb2ce4cf086aee7e67b01ff92ba1b8aeddf1 Author: Colin Ian King Date: Tue Feb 27 16:21:05 2018 +0000 mei: remove dev_err message on an unsupported ioctl commit bb0829a741792b56c908d7745bc0b2b540293bcc upstream. Currently the driver spams the kernel log on unsupported ioctls which is unnecessary as the ioctl returns -ENOIOCTLCMD to indicate this anyway. I suspect this was originally for debugging purposes but it really is not required so remove it. Signed-off-by: Colin Ian King Cc: stable Signed-off-by: Greg Kroah-Hartman commit cbd80224e4f4b51d75f0402b1523ae50c1492158 Author: Johan Hovold Date: Tue Mar 6 09:32:43 2018 +0100 USB: serial: cp210x: add ELDAT Easywave RX09 id commit 1f1e82f74c0947e40144688c9e36abe4b3999f49 upstream. Add device id for ELDAT Easywave RX09 tranceiver. Reported-by: Jan Jansen Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit febce02f048cb31d84f554a5b050d21a47d27846 Author: Clemens Werther Date: Fri Mar 16 10:20:46 2018 +0100 USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator commit 6555ad13a01952c16485c82a52ad1f3e07e34b3a upstream. Add device id for Harman FirmwareHubEmulator to make the device auto-detectable by the driver. Signed-off-by: Clemens Werther Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit fcd722f910a5ccc5f54a6478f736d6e477418ff2 Author: Major Hayden Date: Fri Feb 23 14:29:54 2018 -0600 USB: serial: ftdi_sio: add RT Systems VX-8 cable commit 9608e5c0f079390473b484ef92334dfd3431bb89 upstream. This patch adds a device ID for the RT Systems cable used to program Yaesu VX-8R/VX-8DR handheld radios. It uses the main FTDI VID instead of the common RT Systems VID. Signed-off-by: Major Hayden Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 30fb2960e073cc3bf9985b59ca1337ab98d396e9 Author: Mauro Carvalho Chehab Date: Wed Mar 28 15:12:37 2018 -0300 media: v4l2-compat-ioctl32: initialize a reserved field The get_v4l2_create32() function is missing a logic with would be cleaning a reserved field, causing v4l2-compliance to complain: Buffer ioctls (Input 0): fail: v4l2-test-buffers.cpp(506): check_0(crbufs.reserved, sizeof(crbufs.reserved)) test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit 6a2185e29ebfaa760887c5185917bb240f5e983d Author: Mauro Carvalho Chehab Date: Wed Mar 28 15:12:36 2018 -0300 media: v4l2-compat-ioctl32: use compat_u64 for video standard Instead of using the "v4l2_std_id" typedef, use compat_u64, as otherwise it fails to properly handle some ioctls. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit fe1d928469cc7fcde4a079f52d6e67dc1445fb52 Author: Ricardo Ribalda Date: Wed Mar 28 15:12:35 2018 -0300 media: media/v4l2-ctrls: volatiles should not generate CH_VALUE Volatile controls should not generate CH_VALUE events. Set has_changed to false to prevent this happening. Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit 5f5fe19a886db65a5a9a8b4cc27473e0a5ce7916 Author: Hans Verkuil Date: Wed Mar 28 15:12:34 2018 -0300 media: v4l2-ctrls: fix sparse warning The warning is simple: drivers/media/v4l2-core/v4l2-ctrls.c:1685:15: warning: incorrect type in assignment (different address spaces) but the fix isn't. The core problem was that the conversion from user to kernelspace was done at too low a level and that needed to be moved up. That made it possible to drop pointers to v4l2_ext_control from set_ctrl and validate_new and clean up this sparse warning because those functions now always operate on kernelspace pointers. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit 5829f6608f339153d8975d7f69bdbf3ab49167ff Author: Daniel Mentz Date: Wed Mar 28 15:12:33 2018 -0300 media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logic commit a1dfb4c48cc1e64eeb7800a27c66a6f7e88d075a upstream. The 32-bit compat v4l2 ioctl handling is implemented based on its 64-bit equivalent. It converts 32-bit data structures into its 64-bit equivalents and needs to provide the data to the 64-bit ioctl in user space memory which is commonly allocated using compat_alloc_user_space(). However, due to how that function is implemented, it can only be called a single time for every syscall invocation. Supposedly to avoid this limitation, the existing code uses a mix of memory from the kernel stack and memory allocated through compat_alloc_user_space(). Under normal circumstances, this would not work, because the 64-bit ioctl expects all pointers to point to user space memory. As a workaround, set_fs(KERNEL_DS) is called to temporarily disable this extra safety check and allow kernel pointers. However, this might introduce a security vulnerability: The result of the 32-bit to 64-bit conversion is writeable by user space because the output buffer has been allocated via compat_alloc_user_space(). A malicious user space process could then manipulate pointers inside this output buffer, and due to the previous set_fs(KERNEL_DS) call, functions like get_user() or put_user() no longer prevent kernel memory access. The new approach is to pre-calculate the total amount of user space memory that is needed, allocate it using compat_alloc_user_space() and then divide up the allocated memory to accommodate all data structures that need to be converted. An alternative approach would have been to retain the union type karg that they allocated on the kernel stack in do_video_ioctl(), copy all data from user space into karg and then back to user space. However, we decided against this approach because it does not align with other compat syscall implementations. Instead, we tried to replicate the get_user/put_user pairs as found in other places in the kernel: if (get_user(clipcount, &up->clipcount) || put_user(clipcount, &kp->clipcount)) return -EFAULT; Notes from hans.verkuil@cisco.com: This patch was taken from: https://github.com/LineageOS/android_kernel_samsung_apq8084/commit/97b733953c06e4f0398ade18850f0817778255f7 Clearly nobody could be bothered to upstream this patch or at minimum tell us :-( We only heard about this a week ago. This patch was rebased and cleaned up. Compared to the original I also swapped the order of the convert_in_user arguments so that they matched copy_in_user. It was hard to review otherwise. I also replaced the ALLOC_USER_SPACE/ALLOC_AND_GET by a normal function. Fixes: 6b5a9492ca ("v4l: introduce string control support.") Signed-off-by: Daniel Mentz Co-developed-by: Hans Verkuil Acked-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 89ef0f4315e58faea6c26414a00e6c59fb6b3b2e Author: Hans Verkuil Date: Wed Mar 28 15:12:32 2018 -0300 media: v4l2-compat-ioctl32.c: don't copy back the result for certain errors commit d83a8243aaefe62ace433e4384a4f077bed86acb upstream. Some ioctls need to copy back the result even if the ioctl returned an error. However, don't do this for the error code -ENOTTY. It makes no sense in that cases. Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 9e73a907c79159a6fc53739dee3dd53e437af962 Author: Hans Verkuil Date: Wed Mar 28 15:12:31 2018 -0300 media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer type commit 169f24ca68bf0f247d111aef07af00dd3a02ae88 upstream. There is nothing wrong with using an unknown buffer type. So stop spamming the kernel log whenever this happens. The kernel will just return -EINVAL to signal this. Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 4cbb719aafa20391d10850356ac2c94d080e58f0 Author: Hans Verkuil Date: Wed Mar 28 15:12:30 2018 -0300 media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32 commit a751be5b142ef6bcbbb96d9899516f4d9c8d0ef4 upstream. put_v4l2_window32() didn't copy back the clip list to userspace. Drivers can update the clip rectangles, so this should be done. Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 2f3b72f4a34cb9638bec185229a1b586566df909 Author: Daniel Mentz Date: Wed Mar 28 15:12:29 2018 -0300 media: v4l2-compat-ioctl32: Copy v4l2_window->global_alpha commit 025a26fa14f8fd55d50ab284a30c016a5be953d0 upstream. Commit b2787845fb91 ("V4L/DVB (5289): Add support for video output overlays.") added the field global_alpha to struct v4l2_window but did not update the compat layer accordingly. This change adds global_alpha to struct v4l2_window32 and copies the value for global_alpha back and forth. Signed-off-by: Daniel Mentz Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 4de0aa9aa19b1e801e2a72016b0f1e84efb5b17a Author: Hans Verkuil Date: Wed Mar 28 15:12:28 2018 -0300 media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevs commit 273caa260035c03d89ad63d72d8cd3d9e5c5e3f1 upstream. If the device is of type VFL_TYPE_SUBDEV then vdev->ioctl_ops is NULL so the 'if (!ops->vidioc_query_ext_ctrl)' check would crash. Add a test for !ops to the condition. All sub-devices that have controls will use the control framework, so they do not have an equivalent to ops->vidioc_query_ext_ctrl. Returning false if ops is NULL is the correct thing to do here. Fixes: b8c601e8af ("v4l2-compat-ioctl32.c: fix ctrl_is_pointer") Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Reported-by: Laurent Pinchart Reviewed-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 72bdd7e09b206bb4f402bbaa3e511e33112222e9 Author: Hans Verkuil Date: Wed Mar 28 15:12:27 2018 -0300 media: v4l2-compat-ioctl32.c: fix ctrl_is_pointer commit b8c601e8af2d08f733d74defa8465303391bb930 upstream. ctrl_is_pointer just hardcoded two known string controls, but that caused problems when using e.g. custom controls that use a pointer for the payload. Reimplement this function: it now finds the v4l2_ctrl (if the driver uses the control framework) or it calls vidioc_query_ext_ctrl (if the driver implements that directly). In both cases it can now check if the control is a pointer control or not. Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 2a13e9ce92c3a4e44d548996577efadc3bedd6a7 Author: Hans Verkuil Date: Wed Mar 28 15:12:26 2018 -0300 media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32 commit 8ed5a59dcb47a6f76034ee760b36e089f3e82529 upstream. The struct v4l2_plane32 should set m.userptr as well. The same happens in v4l2_buffer32 and v4l2-compliance tests for this. Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ac35609a8c9690f0efe934e9a019c6de1fc380e7 Author: Hans Verkuil Date: Wed Mar 28 15:12:25 2018 -0300 media: v4l2-compat-ioctl32.c: avoid sizeof(type) commit 333b1e9f96ce05f7498b581509bb30cde03018bf upstream. Instead of doing sizeof(struct foo) use sizeof(*up). There even were cases where 4 * sizeof(__u32) was used instead of sizeof(kp->reserved), which is very dangerous when the size of the reserved array changes. Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit 8d0f174d7938f9ca0127060b10a05adce1fae8db Author: Hans Verkuil Date: Wed Mar 28 15:12:24 2018 -0300 media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32 commit 486c521510c44a04cd756a9267e7d1e271c8a4ba upstream. These helper functions do not really help. Move the code to the __get/put_v4l2_format32 functions. Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit 6438cbe87cb0e360fd5f52abea6ebf20f6ab500f Author: Hans Verkuil Date: Wed Jan 24 04:35:48 2018 -0500 media: v4l2-compat-ioctl32.c: fix the indentation commit b7b957d429f601d6d1942122b339474f31191d75 upstream. The indentation of this source is all over the place. Fix this. This patch only changes whitespace. Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Cc: # for v4.15 and up Signed-off-by: Sasha Levin Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit e4746977e0a60293fa92f6b408116af68f1edbd9 Author: Hans Verkuil Date: Wed Jan 24 08:37:04 2018 -0500 media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUF commit 3ee6d040719ae09110e5cdf24d5386abe5d1b776 upstream. The result of the VIDIOC_PREPARE_BUF ioctl was never copied back to userspace since it was missing in the switch. Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Cc: # for v4.15 and up Signed-off-by: Sasha Levin Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit 1024f43f8e1fae67bd10567c63010b26d8c8cb4c Author: Ricardo Ribalda Date: Mon Jun 20 09:47:22 2016 -0300 vb2: V4L2_BUF_FLAG_DONE is set after DQBUF commit 3171cc2b4eb9831ab4df1d80d0410a945b8bc84e upstream. According to the doc, V4L2_BUF_FLAG_DONE is cleared after DQBUF: V4L2_BUF_FLAG_DONE 0x00000004 ... After calling the VIDIOC_QBUF or VIDIOC_DQBUF it is always cleared ... Unfortunately, it seems that videobuf2 keeps it set after DQBUF. This can be tested with vivid and dev_debug: [257604.338082] video1: VIDIOC_DQBUF: 71:33:25.00260479 index=3, type=vid-cap, flags=0x00002004, field=none, sequence=163, memory=userptr, bytesused=460800, offset/userptr=0x344b000, length=460800 This patch forces FLAG_DONE to 0 after calling DQBUF. Reported-by: Dimitrios Katsaros Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit d5d86369040432a90e248a30806f596428f854a3 Author: Hans Verkuil Date: Tue Jan 30 03:50:01 2018 -0500 media: v4l2-ioctl.c: don't copy back the result for -ENOTTY commit 181a4a2d5a0a7b43cab08a70710d727e7764ccdd upstream. If the ioctl returned -ENOTTY, then don't bother copying back the result as there is no point. Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Cc: # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 2369620165f6716e4c983dc24eb103970bb9098d Author: Paolo Bonzini Date: Wed Jul 5 10:30:56 2017 +0200 scsi: virtio_scsi: always read VPD pages for multiqueue too commit a680f1d463aeaeb00d22af257a56e111967c2f18 upstream. Multi-queue virtio-scsi uses a different scsi_host_template struct. Add the .device_alloc field there, too. Fixes: 25d1d50e23275e141e3a3fe06c25a99f4c4bf4e0 Cc: stable@vger.kernel.org Cc: David Gibson Signed-off-by: Paolo Bonzini Reviewed-by: Fam Zheng Reviewed-by: Stefan Hajnoczi Signed-off-by: Martin K. Petersen Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit 39c292e2f63c41ffe783b417260b4d6a0aec78be Author: Szymon Janc Date: Mon Feb 26 15:41:53 2018 +0100 Bluetooth: Fix missing encryption refresh on Security Request commit 64e759f58f128730b97a3c3a26d283c075ad7c86 upstream. If Security Request is received on connection that is already encrypted with sufficient security master should perform encryption key refresh procedure instead of just ignoring Slave Security Request (Core Spec 5.0 Vol 3 Part H 2.4.6). > ACL Data RX: Handle 3585 flags 0x02 dlen 6 SMP: Security Request (0x0b) len 1 Authentication requirement: Bonding, No MITM, SC, No Keypresses (0x09) < HCI Command: LE Start Encryption (0x08|0x0019) plen 28 Handle: 3585 Random number: 0x0000000000000000 Encrypted diversifier: 0x0000 Long term key: 44264272a5c426a9e868f034cf0e69f3 > HCI Event: Command Status (0x0f) plen 4 LE Start Encryption (0x08|0x0019) ncmd 1 Status: Success (0x00) > HCI Event: Encryption Key Refresh Complete (0x30) plen 3 Status: Success (0x00) Handle: 3585 Signed-off-by: Szymon Janc Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman commit 42b41149e2459edb50d583ac732b4941d898bae8 Author: Florian Westphal Date: Sat Mar 10 01:15:45 2018 +0100 netfilter: x_tables: add and use xt_check_proc_name commit b1d0a5d0cba4597c0394997b2d5fced3e3841b4e upstream. recent and hashlimit both create /proc files, but only check that name is 0 terminated. This can trigger WARN() from procfs when name is "" or "/". Add helper for this and then use it for both. Cc: Eric Dumazet Reported-by: Eric Dumazet Reported-by: Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 63d1e53df8de96085e423a973bb557d6d6b350f3 Author: Florian Westphal Date: Fri Mar 9 14:27:31 2018 +0100 netfilter: bridge: ebt_among: add more missing match size checks commit c8d70a700a5b486bfa8e5a7d33d805389f6e59f9 upstream. ebt_among is special, it has a dynamic match size and is exempt from the central size checks. commit c4585a2823edf ("bridge: ebt_among: add missing match size checks") added validation for pool size, but missed fact that the macros ebt_among_wh_src/dst can already return out-of-bound result because they do not check value of wh_src/dst_ofs (an offset) vs. the size of the match that userspace gave to us. v2: check that offset has correct alignment. Paolo Abeni points out that we should also check that src/dst wormhash arrays do not overlap, and src + length lines up with start of dst (or vice versa). v3: compact wormhash_sizes_valid() part NB: Fixes tag is intentionally wrong, this bug exists from day one when match was added for 2.6 kernel. Tag is there so stable maintainers will notice this one too. Tested with same rules from the earlier patch. Fixes: c4585a2823edf ("bridge: ebt_among: add missing match size checks") Reported-by: Signed-off-by: Florian Westphal Reviewed-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 6be3251dafdc2a75afee5241dc9b2bde91c4ebc2 Author: Steffen Klassert Date: Thu Feb 1 08:49:23 2018 +0100 xfrm: Refuse to insert 32 bit userspace socket policies on 64 bit systems commit 19d7df69fdb2636856dc8919de72fc1bf8f79598 upstream. We don't have a compat layer for xfrm, so userspace and kernel structures have different sizes in this case. This results in a broken configuration, so refuse to configure socket policies when trying to insert from 32 bit userspace as we do it already with policies inserted via netlink. Reported-and-tested-by: syzbot+e1a1577ca8bcb47b769a@syzkaller.appspotmail.com Signed-off-by: Steffen Klassert [use is_compat_task() - gregkh] Signed-off-by: Greg Kroah-Hartman commit 5ca716eed669601b321c66139d626d5b42a011dd Author: Greg Hackmann Date: Wed Mar 7 14:42:53 2018 -0800 net: xfrm: use preempt-safe this_cpu_read() in ipcomp_alloc_tfms() commit 0dcd7876029b58770f769cbb7b484e88e4a305e5 upstream. f7c83bcbfaf5 ("net: xfrm: use __this_cpu_read per-cpu helper") added a __this_cpu_read() call inside ipcomp_alloc_tfms(). At the time, __this_cpu_read() required the caller to either not care about races or to handle preemption/interrupt issues. 3.15 tightened the rules around some per-cpu operations, and now __this_cpu_read() should never be used in a preemptible context. On 3.15 and later, we need to use this_cpu_read() instead. syzkaller reported this leading to the following kernel BUG while fuzzing sendmsg: BUG: using __this_cpu_read() in preemptible [00000000] code: repro/3101 caller is ipcomp_init_state+0x185/0x990 CPU: 3 PID: 3101 Comm: repro Not tainted 4.16.0-rc4-00123-g86f84779d8e9 #154 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0xb9/0x115 check_preemption_disabled+0x1cb/0x1f0 ipcomp_init_state+0x185/0x990 ? __xfrm_init_state+0x876/0xc20 ? lock_downgrade+0x5e0/0x5e0 ipcomp4_init_state+0xaa/0x7c0 __xfrm_init_state+0x3eb/0xc20 xfrm_init_state+0x19/0x60 pfkey_add+0x20df/0x36f0 ? pfkey_broadcast+0x3dd/0x600 ? pfkey_sock_destruct+0x340/0x340 ? pfkey_seq_stop+0x80/0x80 ? __skb_clone+0x236/0x750 ? kmem_cache_alloc+0x1f6/0x260 ? pfkey_sock_destruct+0x340/0x340 ? pfkey_process+0x62a/0x6f0 pfkey_process+0x62a/0x6f0 ? pfkey_send_new_mapping+0x11c0/0x11c0 ? mutex_lock_io_nested+0x1390/0x1390 pfkey_sendmsg+0x383/0x750 ? dump_sp+0x430/0x430 sock_sendmsg+0xc0/0x100 ___sys_sendmsg+0x6c8/0x8b0 ? copy_msghdr_from_user+0x3b0/0x3b0 ? pagevec_lru_move_fn+0x144/0x1f0 ? find_held_lock+0x32/0x1c0 ? do_huge_pmd_anonymous_page+0xc43/0x11e0 ? lock_downgrade+0x5e0/0x5e0 ? get_kernel_page+0xb0/0xb0 ? _raw_spin_unlock+0x29/0x40 ? do_huge_pmd_anonymous_page+0x400/0x11e0 ? __handle_mm_fault+0x553/0x2460 ? __fget_light+0x163/0x1f0 ? __sys_sendmsg+0xc7/0x170 __sys_sendmsg+0xc7/0x170 ? SyS_shutdown+0x1a0/0x1a0 ? __do_page_fault+0x5a0/0xca0 ? lock_downgrade+0x5e0/0x5e0 SyS_sendmsg+0x27/0x40 ? __sys_sendmsg+0x170/0x170 do_syscall_64+0x19f/0x640 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7f0ee73dfb79 RSP: 002b:00007ffe14fc15a8 EFLAGS: 00000207 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0ee73dfb79 RDX: 0000000000000000 RSI: 00000000208befc8 RDI: 0000000000000004 RBP: 00007ffe14fc15b0 R08: 00007ffe14fc15c0 R09: 00007ffe14fc15c0 R10: 0000000000000000 R11: 0000000000000207 R12: 0000000000400440 R13: 00007ffe14fc16b0 R14: 0000000000000000 R15: 0000000000000000 Signed-off-by: Greg Hackmann Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit 5520490d27f410f73014aee6052d44130e2db42c Author: Florian Westphal Date: Mon Feb 12 14:42:01 2018 +0100 xfrm_user: uncoditionally validate esn replay attribute struct commit d97ca5d714a5334aecadadf696875da40f1fbf3e upstream. The sanity test added in ecd7918745234 can be bypassed, validation only occurs if XFRM_STATE_ESN flag is set, but rest of code doesn't care and just checks if the attribute itself is present. So always validate. Alternative is to reject if we have the attribute without the flag but that would change abi. Reported-by: syzbot+0ab777c27d2bb7588f73@syzkaller.appspotmail.com Cc: Mathias Krause Fixes: ecd7918745234 ("xfrm_user: ensure user supplied esn replay window is valid") Fixes: d8647b79c3b7e ("xfrm: Add user interface for esn and big anti-replay windows") Signed-off-by: Florian Westphal Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit 502990185f76a3f3816e3c1e2c130001dc9923cb Author: Masami Hiramatsu Date: Thu May 25 19:38:17 2017 +0900 kprobes/x86: Fix to set RWX bits correctly before releasing trampoline commit c93f5cf571e7795f97d49ef51b766cf25e328545 upstream. Fix kprobes to set(recover) RWX bits correctly on trampoline buffer before releasing it. Releasing readonly page to module_memfree() crash the kernel. Without this fix, if kprobes user register a bunch of kprobes in function body (since kprobes on function entry usually use ftrace) and unregister it, kernel hits a BUG and crash. Link: http://lkml.kernel.org/r/149570868652.3518.14120169373590420503.stgit@devbox Signed-off-by: Masami Hiramatsu Fixes: d0381c81c2f7 ("kprobes/x86: Set kprobes pages read-only") Signed-off-by: Steven Rostedt (VMware) Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit 2883c668105d7829aee746d12ce0407b22c345a4 Author: Ben Hutchings Date: Thu Jan 11 17:01:36 2018 +0000 xhci: Fix ring leak in failure path of xhci_alloc_virt_device() This is a stable-only fix for the backport of commit 5d9b70f7d52e ("xhci: Don't add a virt_dev to the devs array before it's fully allocated"). In branches that predate commit c5628a2af83a ("xhci: remove endpoint ring cache") there is an additional failure path in xhci_alloc_virt_device() where ring cache allocation fails, in which case we need to free the ring allocated for endpoint 0. Signed-off-by: Ben Hutchings Cc: Mathias Nyman Cc: Wang Han Signed-off-by: Greg Kroah-Hartman commit 15075ddaadee365837c7ae5d00299e6890b8289b Author: Ben Hutchings Date: Thu Mar 8 15:59:07 2018 +0000 Revert "led: core: Fix brightness setting when setting delay_off=0" This reverts commit 20f6d9c2af33da892a0e03ffd6249c7ab81edfb7, which was commit 2b83ff96f51d0b039c4561b9f95c824d7bddb85c upstream. The bug that it should fix was only introduced in Linux 4.7, and in 4.4 it causes a regression. Reported-by: Jacek Anaszewski Cc: Matthieu CASTET Signed-off-by: Ben Hutchings Cc: Wang Han Signed-off-by: Greg Kroah-Hartman commit 7d14bc73d4d93db22b27493a405996857fb0748f Author: Krzysztof Opasiak Date: Thu Jan 19 18:55:28 2017 +0100 usb: gadget: f_hid: fix: Prevent accessing released memory commit aa65d11aa008f4de58a9cee7e121666d9d68505e upstream. When we unlock our spinlock to copy data to user we may get disabled by USB host and free the whole list of completed out requests including the one from which we are copying the data to user memory. To prevent from this let's remove our working element from the list and place it back only if there is sth left when we finish with it. Fixes: 99c515005857 ("usb: gadget: hidg: register OUT INT endpoint for SET_REPORT") Cc: stable@vger.kernel.org Tested-by: David Lechner Signed-off-by: Krzysztof Opasiak Signed-off-by: Felipe Balbi Cc: Jerry Zhang Signed-off-by: Greg Kroah-Hartman commit fee92f39627a0eeb011bcfb90ac34212d5946d5e Author: Felipe F. Tonello Date: Mon Aug 8 21:30:06 2016 +0100 usb: gadget: align buffer size when allocating for OUT endpoint commit e0466156ee2e944fb47a3fa00932c3698a6d2c67 upstream. Using usb_ep_align() makes sure that the buffer size for OUT endpoints is always aligned with wMaxPacketSize (512 usually). This makes sure that no buffer has the wrong size, which can cause nasty bugs. Signed-off-by: Felipe F. Tonello Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman commit 7757f7309913e77ef71f73e58b7ed4807bd51c0c Author: Felipe F. Tonello Date: Mon Aug 8 21:30:04 2016 +0100 usb: gadget: fix usb_ep_align_maybe endianness and new usb_ep_align commit 16b114a6d7973cf027e4c2b23eae1076eaf98c25 upstream. USB spec specifies wMaxPacketSize to be little endian (as other properties), so when using this variable in the driver we should convert to the current CPU endianness if necessary. This patch also introduces usb_ep_align() which does always returns the aligned buffer size for an endpoint. This is useful to be used by USB requests allocator functions. Signed-off-by: Felipe F. Tonello Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman commit ab34ca160fb80df1ea86f64e7690c6d4a5ee045d Author: Felipe F. Tonello Date: Mon Aug 8 21:30:05 2016 +0100 usb: gadget: change len to size_t on alloc_ep_req() commit 69bb99738b5c6d56d2b1a75db9cbb4d187453c1a upstream. Length of buffers should be of type size_t whenever possible. Altough recommended, this change has no real practical change, unless a driver has a uses a huge or negative buffer size - it might help find these bugs. Signed-off-by: Felipe F. Tonello Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman commit 70fa9b508c19a47110c96f20bac460b90310c847 Author: Felipe F. Tonello Date: Tue Nov 10 17:52:05 2015 +0000 usb: gadget: define free_ep_req as universal function commit 079fe5a6da616891cca1a26e803e1df2a87e9ae5 upstream. This function is shared between gadget functions, so this avoid unnecessary duplicated code and potentially avoid memory leaks. Reviewed-by: Robert Baldyga Signed-off-by: Felipe F. Tonello Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman commit 25eac84ca257885a52aab0338005f76235c93d10 Author: Richard Narron Date: Wed Jan 10 09:12:16 2018 -0700 partitions/msdos: Unable to mount UFS 44bsd partitions commit 5f15684bd5e5ef39d4337988864fec8012471dda upstream. UFS partitions from newer versions of FreeBSD 10 and 11 use relative addressing for their subpartitions. But older versions of FreeBSD still use absolute addressing just like OpenBSD and NetBSD. Instead of simply testing for a FreeBSD partition, the code needs to also test if the starting offset of the C subpartition is zero. https://bugzilla.kernel.org/show_bug.cgi?id=197733 Signed-off-by: Richard Narron Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 8f7db030a6398638515c645184ad261d9ea58559 Author: Linus Torvalds Date: Mon Mar 26 15:39:07 2018 -1000 perf/hwbp: Simplify the perf-hwbp code, fix documentation commit f67b15037a7a50c57f72e69a6d59941ad90a0f0f upstream. Annoyingly, modify_user_hw_breakpoint() unnecessarily complicates the modification of a breakpoint - simplify it and remove the pointless local variables. Also update the stale Docbook while at it. Signed-off-by: Linus Torvalds Acked-by: Thomas Gleixner Cc: Cc: Alexander Shishkin Cc: Andy Lutomirski Cc: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Vince Weaver Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman commit 46b7dc0470bcec486d7514a427478e1761add0c1 Author: Dan Carpenter Date: Tue Mar 27 16:07:52 2018 +0300 ALSA: pcm: potential uninitialized return values commit 5607dddbfca774fb38bffadcb077fe03aa4ac5c6 upstream. Smatch complains that "tmp" can be uninitialized if we do a zero size write. Fixes: 02a5d6925cd3 ("ALSA: pcm: Avoid potential races between OSS ioctls and read/write") Signed-off-by: Dan Carpenter Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit a61083601e592212022640da7a9ce2d787cdd6b8 Author: Stefan Roese Date: Mon Mar 26 16:10:21 2018 +0200 ALSA: pcm: Use dma_bytes as size parameter in dma_mmap_coherent() commit 9066ae7ff5d89c0b5daa271e2d573540097a94fa upstream. When trying to use the driver (e.g. aplay *.wav), the 4MiB DMA buffer will get mmapp'ed in 16KiB chunks. But this fails with the 2nd 16KiB area, as the page offset is outside of the VMA range (size), which is currently used as size parameter in snd_pcm_lib_default_mmap(). By using the DMA buffer size (dma_bytes) instead, the complete DMA buffer can be mmapp'ed and the issue is fixed. This issue was detected on an ARM platform (TI AM57xx) using the RME HDSP MADI PCIe soundcard. Fixes: 657b1989dacf ("ALSA: pcm - Use dma_mmap_coherent() if available") Signed-off-by: Stefan Roese Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 4c4921fcfa75bba08344fc2dae1c01fb1b8eabd3 Author: Linus Walleij Date: Sat Mar 3 23:29:03 2018 +0100 mtd: jedec_probe: Fix crash in jedec_read_mfr() commit 87a73eb5b56fd6e07c8e499fe8608ef2d8912b82 upstream. It turns out that the loop where we read manufacturer jedec_read_mfd() can under some circumstances get a CFI_MFR_CONTINUATION repeatedly, making the loop go over all banks and eventually hit the end of the map and crash because of an access violation: Unable to handle kernel paging request at virtual address c4980000 pgd = (ptrval) [c4980000] *pgd=03808811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] PREEMPT ARM CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc1+ #150 Hardware name: Gemini (Device Tree) PC is at jedec_probe_chip+0x6ec/0xcd0 LR is at 0x4 pc : [] lr : [<00000004>] psr: 60000013 sp : c382dd18 ip : 0000ffff fp : 00000000 r10: c0626388 r9 : 00020000 r8 : c0626340 r7 : 00000000 r6 : 00000001 r5 : c3a71afc r4 : c382dd70 r3 : 00000001 r2 : c4900000 r1 : 00000002 r0 : 00080000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 0000397f Table: 00004000 DAC: 00000053 Process swapper (pid: 1, stack limit = 0x(ptrval)) Fix this by breaking the loop with a return 0 if the offset exceeds the map size. Fixes: 5c9c11e1c47c ("[MTD] [NOR] Add support for flash chips with ID in bank other than 0") Cc: Signed-off-by: Linus Walleij Signed-off-by: Boris Brezillon Signed-off-by: Greg Kroah-Hartman commit f4d8124a4ade232cae1161a6aca86e0c0a1fa4f6 Author: Florian Fainelli Date: Sun Mar 18 12:49:51 2018 -0700 net: fec: Fix unbalanced PM runtime calls [ Upstream commit a069215cf5985f3aa1bba550264907d6bd05c5f7 ] When unbinding/removing the driver, we will run into the following warnings: [ 259.655198] fec 400d1000.ethernet: 400d1000.ethernet supply phy not found, using dummy regulator [ 259.665065] fec 400d1000.ethernet: Unbalanced pm_runtime_enable! [ 259.672770] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00 [ 259.683062] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: f2:3e:93:b7:29:c1 [ 259.696239] libphy: fec_enet_mii_bus: probed Avoid these warnings by balancing the runtime PM calls during fec_drv_remove(). Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 60aa3ac5c1480283691b2663201f2bc1888d8b5f Author: Julian Wiedmann Date: Tue Mar 20 07:59:15 2018 +0100 s390/qeth: on channel error, reject further cmd requests [ Upstream commit a6c3d93963e4b333c764fde69802c3ea9eaa9d5c ] When the IRQ handler determines that one of the cmd IO channels has failed and schedules recovery, block any further cmd requests from being submitted. The request would inevitably stall, and prevent the recovery from making progress until the request times out. This sort of error was observed after Live Guest Relocation, where the pending IO on the READ channel intentionally gets terminated to kick-start recovery. Simultaneously the guest executed SIOCETHTOOL, triggering qeth to issue a QUERY CARD INFO command. The command then stalled in the inoperabel WRITE channel. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 61a3becbba4f0a70f0a11d638015a972302ba501 Author: Julian Wiedmann Date: Tue Mar 20 07:59:14 2018 +0100 s390/qeth: lock read device while queueing next buffer [ Upstream commit 17bf8c9b3d499d5168537c98b61eb7a1fcbca6c2 ] For calling ccw_device_start(), issue_next_read() needs to hold the device's ccwlock. This is satisfied for the IRQ handler path (where qeth_irq() gets called under the ccwlock), but we need explicit locking for the initial call by the MPC initialization. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 6bec10f3e96a1583d30cb204ed4b49b04eb2c9a0 Author: Julian Wiedmann Date: Tue Mar 20 07:59:13 2018 +0100 s390/qeth: when thread completes, wake up all waiters [ Upstream commit 1063e432bb45be209427ed3f1ca3908e4aa3c7d7 ] qeth_wait_for_threads() is potentially called by multiple users, make sure to notify all of them after qeth_clear_thread_running_bit() adjusted the thread_running_mask. With no timeout, callers would otherwise stall. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit c6050863bb2414753d6e0999c03d293733061277 Author: Julian Wiedmann Date: Tue Mar 20 07:59:12 2018 +0100 s390/qeth: free netdevice when removing a card [ Upstream commit 6be687395b3124f002a653c1a50b3260222b3cd7 ] On removal, a qeth card's netdevice is currently not properly freed because the call chain looks as follows: qeth_core_remove_device(card) lx_remove_device(card) unregister_netdev(card->dev) card->dev = NULL !!! qeth_core_free_card(card) if (card->dev) !!! free_netdev(card->dev) Fix it by free'ing the netdev straight after unregistering. This also fixes the sysfs-driven layer switch case (qeth_dev_layer2_store()), where the need to free the current netdevice was not considered at all. Note that free_netdev() takes care of the netif_napi_del() for us too. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann Reviewed-by: Ursula Braun Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 08c5adee2ec696be253486340a60e2216e52ec4b Author: Arkadi Sharshevsky Date: Thu Mar 8 12:42:10 2018 +0200 team: Fix double free in error path [ Upstream commit cbcc607e18422555db569b593608aec26111cb0b ] The __send_and_alloc_skb() receives a skb ptr as a parameter but in case it fails the skb is not valid: - Send failed and released the skb internally. - Allocation failed. The current code tries to release the skb in case of failure which causes redundant freeing. Fixes: 9b00cf2d1024 ("team: implement multipart netlink messages for options transfers") Signed-off-by: Arkadi Sharshevsky Acked-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 112517ee806cf8a0614c60d86e7786c0df0fa396 Author: Vinicius Costa Gomes Date: Wed Mar 14 13:32:09 2018 -0700 skbuff: Fix not waking applications when errors are enqueued [ Upstream commit 6e5d58fdc9bedd0255a8781b258f10bbdc63e975 ] When errors are enqueued to the error queue via sock_queue_err_skb() function, it is possible that the waiting application is not notified. Calling 'sk->sk_data_ready()' would not notify applications that selected only POLLERR events in poll() (for example). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Randy E. Witt Reviewed-by: Eric Dumazet Signed-off-by: Vinicius Costa Gomes Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 4544f23db6149301fbd6596d2e670f471fbc4f78 Author: David Ahern Date: Fri Feb 16 11:03:03 2018 -0800 net: Only honor ifindex in IP_PKTINFO if non-0 [ Upstream commit 2cbb4ea7de167b02ffa63e9cdfdb07a7e7094615 ] Only allow ifindex from IP_PKTINFO to override SO_BINDTODEVICE settings if the index is actually set in the message. Signed-off-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit b22ad56cce33e45dbfa19b41c4d7368a5bf34bde Author: Nicolas Dichtel Date: Wed Mar 14 21:10:23 2018 +0100 netlink: avoid a double skb free in genlmsg_mcast() [ Upstream commit 02a2385f37a7c6594c9d89b64c4a1451276f08eb ] nlmsg_multicast() consumes always the skb, thus the original skb must be freed only when this function is called with a clone. Fixes: cb9f7a9a5c96 ("netlink: ensure to loop over all netns in genlmsg_multicast_allns()") Reported-by: Ben Hutchings Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit a6ca1eddd279cb9bebf83f4473e347a540f3b442 Author: Arvind Yadav Date: Tue Mar 13 16:50:06 2018 +0100 net/iucv: Free memory obtained by kzalloc [ Upstream commit fa6a91e9b907231d2e38ea5ed89c537b3525df3d ] Free memory by calling put_device(), if afiucv_iucv_init is not successful. Signed-off-by: Arvind Yadav Reviewed-by: Cornelia Huck Signed-off-by: Ursula Braun Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit aab60f194f488d9598067919e38e0c8633117b02 Author: Christophe JAILLET Date: Sun Mar 18 23:59:36 2018 +0100 net: ethernet: arc: Fix a potential memory leak if an optional regulator is deferred [ Upstream commit 00777fac28ba3e126b9e63e789a613e8bd2cab25 ] If the optional regulator is deferred, we must release some resources. They will be re-allocated when the probe function will be called again. Fixes: 6eacf31139bf ("ethernet: arc: Add support for Rockchip SoC layer device tree bindings") Signed-off-by: Christophe JAILLET Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 2e017ead9b03445338877e951334cda71ac84b65 Author: Eric Dumazet Date: Tue Mar 6 07:54:53 2018 -0800 l2tp: do not accept arbitrary sockets [ Upstream commit 17cfe79a65f98abe535261856c5aef14f306dff7 ] syzkaller found an issue caused by lack of sufficient checks in l2tp_tunnel_create() RAW sockets can not be considered as UDP ones for instance. In another patch, we shall replace all pr_err() by less intrusive pr_debug() so that syzkaller can find other bugs faster. Acked-by: Guillaume Nault Acked-by: James Chapman ================================================================== BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x3ee/0x5f0 net/ipv4/udp_tunnel.c:69 dst_release: dst:00000000d53d0d0f refcnt:-1 Write of size 1 at addr ffff8801d013b798 by task syz-executor3/6242 CPU: 1 PID: 6242 Comm: syz-executor3 Not tainted 4.16.0-rc2+ #253 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x23b/0x360 mm/kasan/report.c:412 __asan_report_store1_noabort+0x17/0x20 mm/kasan/report.c:435 setup_udp_tunnel_sock+0x3ee/0x5f0 net/ipv4/udp_tunnel.c:69 l2tp_tunnel_create+0x1354/0x17f0 net/l2tp/l2tp_core.c:1596 pppol2tp_connect+0x14b1/0x1dd0 net/l2tp/l2tp_ppp.c:707 SYSC_connect+0x213/0x4a0 net/socket.c:1640 SyS_connect+0x24/0x30 net/socket.c:1621 do_syscall_64+0x280/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit c2b32840e2f62938662ae102a4fe5043b92cdcb6 Author: Lorenzo Bianconi Date: Thu Mar 8 17:00:02 2018 +0100 ipv6: fix access to non-linear packet in ndisc_fill_redirect_hdr_option() [ Upstream commit 9f62c15f28b0d1d746734666d88a79f08ba1e43e ] Fix the following slab-out-of-bounds kasan report in ndisc_fill_redirect_hdr_option when the incoming ipv6 packet is not linear and the accessed data are not in the linear data region of orig_skb. [ 1503.122508] ================================================================== [ 1503.122832] BUG: KASAN: slab-out-of-bounds in ndisc_send_redirect+0x94e/0x990 [ 1503.123036] Read of size 1184 at addr ffff8800298ab6b0 by task netperf/1932 [ 1503.123220] CPU: 0 PID: 1932 Comm: netperf Not tainted 4.16.0-rc2+ #124 [ 1503.123347] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-2.fc27 04/01/2014 [ 1503.123527] Call Trace: [ 1503.123579] [ 1503.123638] print_address_description+0x6e/0x280 [ 1503.123849] kasan_report+0x233/0x350 [ 1503.123946] memcpy+0x1f/0x50 [ 1503.124037] ndisc_send_redirect+0x94e/0x990 [ 1503.125150] ip6_forward+0x1242/0x13b0 [...] [ 1503.153890] Allocated by task 1932: [ 1503.153982] kasan_kmalloc+0x9f/0xd0 [ 1503.154074] __kmalloc_track_caller+0xb5/0x160 [ 1503.154198] __kmalloc_reserve.isra.41+0x24/0x70 [ 1503.154324] __alloc_skb+0x130/0x3e0 [ 1503.154415] sctp_packet_transmit+0x21a/0x1810 [ 1503.154533] sctp_outq_flush+0xc14/0x1db0 [ 1503.154624] sctp_do_sm+0x34e/0x2740 [ 1503.154715] sctp_primitive_SEND+0x57/0x70 [ 1503.154807] sctp_sendmsg+0xaa6/0x1b10 [ 1503.154897] sock_sendmsg+0x68/0x80 [ 1503.154987] ___sys_sendmsg+0x431/0x4b0 [ 1503.155078] __sys_sendmsg+0xa4/0x130 [ 1503.155168] do_syscall_64+0x171/0x3f0 [ 1503.155259] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 1503.155436] Freed by task 1932: [ 1503.155527] __kasan_slab_free+0x134/0x180 [ 1503.155618] kfree+0xbc/0x180 [ 1503.155709] skb_release_data+0x27f/0x2c0 [ 1503.155800] consume_skb+0x94/0xe0 [ 1503.155889] sctp_chunk_put+0x1aa/0x1f0 [ 1503.155979] sctp_inq_pop+0x2f8/0x6e0 [ 1503.156070] sctp_assoc_bh_rcv+0x6a/0x230 [ 1503.156164] sctp_inq_push+0x117/0x150 [ 1503.156255] sctp_backlog_rcv+0xdf/0x4a0 [ 1503.156346] __release_sock+0x142/0x250 [ 1503.156436] release_sock+0x80/0x180 [ 1503.156526] sctp_sendmsg+0xbb0/0x1b10 [ 1503.156617] sock_sendmsg+0x68/0x80 [ 1503.156708] ___sys_sendmsg+0x431/0x4b0 [ 1503.156799] __sys_sendmsg+0xa4/0x130 [ 1503.156889] do_syscall_64+0x171/0x3f0 [ 1503.156980] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 1503.157158] The buggy address belongs to the object at ffff8800298ab600 which belongs to the cache kmalloc-1024 of size 1024 [ 1503.157444] The buggy address is located 176 bytes inside of 1024-byte region [ffff8800298ab600, ffff8800298aba00) [ 1503.157702] The buggy address belongs to the page: [ 1503.157820] page:ffffea0000a62a00 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 [ 1503.158053] flags: 0x4000000000008100(slab|head) [ 1503.158171] raw: 4000000000008100 0000000000000000 0000000000000000 00000001800e000e [ 1503.158350] raw: dead000000000100 dead000000000200 ffff880036002600 0000000000000000 [ 1503.158523] page dumped because: kasan: bad access detected [ 1503.158698] Memory state around the buggy address: [ 1503.158816] ffff8800298ab900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1503.158988] ffff8800298ab980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1503.159165] >ffff8800298aba00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1503.159338] ^ [ 1503.159436] ffff8800298aba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1503.159610] ffff8800298abb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1503.159785] ================================================================== [ 1503.159964] Disabling lock debugging due to kernel taint The test scenario to trigger the issue consists of 4 devices: - H0: data sender, connected to LAN0 - H1: data receiver, connected to LAN1 - GW0 and GW1: routers between LAN0 and LAN1. Both of them have an ethernet connection on LAN0 and LAN1 On H{0,1} set GW0 as default gateway while on GW0 set GW1 as next hop for data from LAN0 to LAN1. Moreover create an ip6ip6 tunnel between H0 and H1 and send 3 concurrent data streams (TCP/UDP/SCTP) from H0 to H1 through ip6ip6 tunnel (send buffer size is set to 16K). While data streams are active flush the route cache on HA multiple times. I have not been able to identify a given commit that introduced the issue since, using the reproducer described above, the kasan report has been triggered from 4.14 and I have not gone back further. Reported-by: Jianlin Shi Reviewed-by: Stefano Brivio Reviewed-by: Eric Dumazet Signed-off-by: Lorenzo Bianconi Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit e717aef0e7ed299b43812cd1a2bcf5888eafad9b Author: Alexey Kodanev Date: Tue Mar 6 22:57:01 2018 +0300 dccp: check sk for closed state in dccp_sendmsg() [ Upstream commit 67f93df79aeefc3add4e4b31a752600f834236e2 ] dccp_disconnect() sets 'dp->dccps_hc_tx_ccid' tx handler to NULL, therefore if DCCP socket is disconnected and dccp_sendmsg() is called after it, it will cause a NULL pointer dereference in dccp_write_xmit(). This crash and the reproducer was reported by syzbot. Looks like it is reproduced if commit 69c64866ce07 ("dccp: CVE-2017-8824: use-after-free in DCCP code") is applied. Reported-by: syzbot+f99ab3887ab65d70f816@syzkaller.appspotmail.com Signed-off-by: Alexey Kodanev Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 6ab380698a5301fa8ccf995d946351cf4047ee52 Author: Greg Kroah-Hartman Date: Fri Mar 30 10:56:51 2018 +0200 Revert "genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs" This reverts commit 093c265afffb0a91a7611c3bb74d0883731a807b which is commit 382bd4de61827dbaaf5fb4fb7b1f4be4a86505e7 upstream. It causes too many problems with the stable tree, and would require too many other things to be backported, so just revert it. Reported-by: Guenter Roeck Cc: Thomas Gleixner Cc: Hans de Goede Cc: Marc Zyngier Cc: Thomas Gleixner Cc: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit d9a6055e21f5f8452d77cbee0d6461b079268bca Author: Johannes Thumshirn Date: Wed May 10 09:53:40 2017 +0200 scsi: sg: don't return bogus Sg_requests commit 48ae8484e9fc324b4968d33c585e54bc98e44d61 upstream. If the list search in sg_get_rq_mark() fails to find a valid request, we return a bogus element. This then can later lead to a GPF in sg_remove_scat(). So don't return bogus Sg_requests in sg_get_rq_mark() but NULL in case the list search doesn't find a valid request. Signed-off-by: Johannes Thumshirn Reported-by: Andrey Konovalov Cc: Hannes Reinecke Cc: Christoph Hellwig Cc: Doug Gilbert Reviewed-by: Hannes Reinecke Acked-by: Doug Gilbert Signed-off-by: Martin K. Petersen Cc: Tony Battersby Signed-off-by: Greg Kroah-Hartman commit e7dc809e8042cf3d2c48ffa616941a8b11d3beba Author: Linus Torvalds Date: Tue Mar 20 12:16:59 2018 -0700 kvm/x86: fix icebp instruction handling commit 32d43cd391bacb5f0814c2624399a5dad3501d09 upstream. The undocumented 'icebp' instruction (aka 'int1') works pretty much like 'int3' in the absense of in-circuit probing equipment (except, obviously, that it raises #DB instead of raising #BP), and is used by some validation test-suites as such. But Andy Lutomirski noticed that his test suite acted differently in kvm than on bare hardware. The reason is that kvm used an inexact test for the icebp instruction: it just assumed that an all-zero VM exit qualification value meant that the VM exit was due to icebp. That is not unlike the guess that do_debug() does for the actual exception handling case, but it's purely a heuristic, not an absolute rule. do_debug() does it because it wants to ascribe _some_ reasons to the #DB that happened, and an empty %dr6 value means that 'icebp' is the most likely casue and we have no better information. But kvm can just do it right, because unlike the do_debug() case, kvm actually sees the real reason for the #DB in the VM-exit interruption information field. So instead of relying on an inexact heuristic, just use the actual VM exit information that says "it was 'icebp'". Right now the 'icebp' instruction isn't technically documented by Intel, but that will hopefully change. The special "privileged software exception" information _is_ actually mentioned in the Intel SDM, even though the cause of it isn't enumerated. Reported-by: Andy Lutomirski Tested-by: Paolo Bonzini Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit b1da147c2749874c348f6afdf67ce404a47cfe7c Author: Linus Torvalds Date: Sat Mar 24 10:43:26 2018 +0100 tty: vt: fix up tabstops properly commit f1869a890cdedb92a3fab969db5d0fd982850273 upstream. Tabs on a console with long lines do not wrap properly, so correctly account for the line length when computing the tab placement location. Reported-by: James Holderness Signed-off-by: Greg Kroah-Hartman Cc: stable Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 49636e34157a189e9c7f0673fe641152be6b3aa8 Author: Andri Yngvason Date: Thu Mar 15 18:23:17 2018 +0000 can: cc770: Fix use after free in cc770_tx_interrupt() commit 9ffd7503944ec7c0ef41c3245d1306c221aef2be upstream. This fixes use after free introduced by the last cc770 patch. Signed-off-by: Andri Yngvason Fixes: 746201235b3f ("can: cc770: Fix queue stall & dropped RTR reply") Cc: linux-stable Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit be889c45a879e08f1624c7fd81facf9fcb172c72 Author: Andri Yngvason Date: Wed Mar 14 11:52:57 2018 +0000 can: cc770: Fix queue stall & dropped RTR reply commit 746201235b3f876792099079f4c6fea941d76183 upstream. While waiting for the TX object to send an RTR, an external message with a matching id can overwrite the TX data. In this case we must call the rx routine and then try transmitting the message that was overwritten again. The queue was being stalled because the RX event did not generate an interrupt to wake up the queue again and the TX event did not happen because the TXRQST flag is reset by the chip when new data is received. According to the CC770 datasheet the id of a message object should not be changed while the MSGVAL bit is set. This has been fixed by resetting the MSGVAL bit before modifying the object in the transmit function and setting it after. It is not enough to set & reset CPUUPD. It is important to keep the MSGVAL bit reset while the message object is being modified. Otherwise, during RTR transmission, a frame with matching id could trigger an rx-interrupt, which would cause a race condition between the interrupt routine and the transmit function. Signed-off-by: Andri Yngvason Tested-by: Richard Weinberger Cc: linux-stable Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit bcddd27ebfd3cb68ed306e67ed2f33d6d6175d9a Author: Andri Yngvason Date: Wed Mar 14 11:52:56 2018 +0000 can: cc770: Fix stalls on rt-linux, remove redundant IRQ ack commit f4353daf4905c0099fd25fa742e2ffd4a4bab26a upstream. This has been reported to cause stalls on rt-linux. Suggested-by: Richard Weinberger Tested-by: Richard Weinberger Signed-off-by: Andri Yngvason Cc: linux-stable Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit 43f8ff29c37bf96b918a8fa1a9a2c13d28603044 Author: Dan Carpenter Date: Mon Mar 19 14:07:45 2018 +0300 staging: ncpfs: memory corruption in ncp_read_kernel() commit 4c41aa24baa4ed338241d05494f2c595c885af8f upstream. If the server is malicious then *bytes_read could be larger than the size of the "target" buffer. It would lead to memory corruption when we do the memcpy(). Reported-by: Dr Silvio Cesare of InfoSect Signed-off-by: Dan Carpenter Cc: stable Signed-off-by: Greg Kroah-Hartman commit 23c8c15439f66ed7453e6490acf7c8b86ca21557 Author: Masami Hiramatsu Date: Sat Mar 17 21:38:10 2018 +0900 tracing: probeevent: Fix to support minus offset from symbol commit c5d343b6b7badd1f5fe0873eff2e8d63a193e732 upstream. In Documentation/trace/kprobetrace.txt, it says @SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol) However, the parser doesn't parse minus offset correctly, since commit 2fba0c8867af ("tracing/kprobes: Fix probe offset to be unsigned") drops minus ("-") offset support for kprobe probe address usage. This fixes the traceprobe_split_symbol_offset() to parse minus offset again with checking the offset range, and add a minus offset check in kprobe probe address usage. Link: http://lkml.kernel.org/r/152129028983.31874.13419301530285775521.stgit@devbox Cc: Ingo Molnar Cc: Tom Zanussi Cc: Arnaldo Carvalho de Melo Cc: Ravi Bangoria Cc: stable@vger.kernel.org Fixes: 2fba0c8867af ("tracing/kprobes: Fix probe offset to be unsigned") Acked-by: Namhyung Kim Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman commit 33a155b5e0f89cdc7105fbaa4667ffbf22bb37fe Author: Arend Van Spriel Date: Wed Feb 28 21:15:20 2018 +0100 brcmfmac: fix P2P_DEVICE ethernet address generation commit 455f3e76cfc0d893585a5f358b9ddbe9c1e1e53b upstream. The firmware has a requirement that the P2P_DEVICE address should be different from the address of the primary interface. When not specified by user-space, the driver generates the MAC address for the P2P_DEVICE interface using the MAC address of the primary interface and setting the locally administered bit. However, the MAC address of the primary interface may already have that bit set causing the creation of the P2P_DEVICE interface to fail with -EBUSY. Fix this by using a random address instead to determine the P2P_DEVICE address. Cc: stable@vger.kernel.org # 3.10.y Reported-by: Hans de Goede Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman commit 6949153ccb2fde17fb76e1ebcfdb8f5727dc58d1 Author: Greg Kroah-Hartman Date: Wed Mar 21 16:45:53 2018 +0100 drm: udl: Properly check framebuffer mmap offsets commit 3b82a4db8eaccce735dffd50b4d4e1578099b8e8 upstream. The memmap options sent to the udl framebuffer driver were not being checked for all sets of possible crazy values. Fix this up by properly bounding the allowed values. Reported-by: Eyal Itkin Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20180321154553.GA18454@kroah.com Signed-off-by: Greg Kroah-Hartman commit 897e06d03877c2f330111be98b59a6c8b3b693dc Author: Hans de Goede Date: Mon Mar 19 16:34:00 2018 +0100 libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version commit d418ff56b8f2d2b296daafa8da151fe27689b757 upstream. When commit 9c7be59fc519af ("libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs") was added it inherited the ATA_HORKAGE_NO_NCQ_TRIM quirk from the existing "Crucial_CT*MX100*" entry, but that entry sets model_rev to "MU01", where as the entry adding the NOLPM quirk sets it to NULL. This means that after this commit we no apply the NO_NCQ_TRIM quirk to all "Crucial_CT512MX100*" SSDs even if they have the fixed "MU02" firmware. This commit splits the "Crucial_CT512MX100*" quirk into 2 quirks, one for the "MU01" firmware and one for all other firmware versions, so that we once again only apply the NO_NCQ_TRIM quirk to the "MU01" firmware version. Fixes: 9c7be59fc519af ("libata: Apply NOLPM quirk to ... MX100 512GB SSDs") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit c77c783b532daf469b45a7cf1d0684d9031db3e1 Author: Hans de Goede Date: Mon Mar 19 16:33:59 2018 +0100 libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions commit 3bf7b5d6d017c27e0d3b160aafb35a8e7cfeda1f upstream. Commit b17e5729a630 ("libata: disable LPM for Crucial BX100 SSD 500GB drive"), introduced a ATA_HORKAGE_NOLPM quirk for Crucial BX100 500GB SSDs but limited this to the MU02 firmware version, according to: http://www.crucial.com/usa/en/support-ssd-firmware MU02 is the last version, so there are no newer possibly fixed versions and if the MU02 version has broken LPM then the MU01 almost certainly also has broken LPM, so this commit changes the quirk to apply to all firmware versions. Fixes: b17e5729a630 ("libata: disable LPM for Crucial BX100 SSD 500GB...") Cc: stable@vger.kernel.org Cc: Kai-Heng Feng Signed-off-by: Hans de Goede Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit 34b98861806eba4d20694a72ceee084794c7146b Author: Hans de Goede Date: Mon Mar 19 16:33:58 2018 +0100 libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs commit 62ac3f7305470e3f52f159de448bc1a771717e88 upstream. There have been reports of the Crucial M500 480GB model not working with LPM set to min_power / med_power_with_dipm level. It has not been tested with medium_power, but that typically has no measurable power-savings. Note the reporters Crucial_CT480M500SSD3 has a firmware version of MU03 and there is a MU05 update available, but that update does not mention any LPM fixes in its changelog, so the quirk matches all firmware versions. In my experience the LPM problems with (older) Crucial SSDs seem to be limited to higher capacity versions of the SSDs (different firmware?), so this commit adds a NOLPM quirk for the 480 and 960GB versions of the M500, to avoid LPM causing issues with these SSDs. Cc: stable@vger.kernel.org Reported-and-tested-by: Martin Steigerwald Signed-off-by: Hans de Goede Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit d829e3ad277a9fa8f1aede7d1619b3a0b00ef81f Author: Ju Hyung Park Date: Sun Mar 11 02:28:35 2018 +0900 libata: Enable queued TRIM for Samsung SSD 860 commit ca6bfcb2f6d9deab3924bf901e73622a94900473 upstream. Samsung explicitly states that queued TRIM is supported for Linux with 860 PRO and 860 EVO. Make the previous blacklist to cover only 840 and 850 series. Signed-off-by: Park Ju Hyung Reviewed-by: Martin K. Petersen Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 3fcf9215889144f5b89164b62ad286ec4d353704 Author: Kai-Heng Feng Date: Sun Feb 18 22:17:09 2018 +0800 libata: disable LPM for Crucial BX100 SSD 500GB drive commit b17e5729a630d8326a48ec34ef02e6b4464a6aef upstream. After Laptop Mode Tools starts to use min_power for LPM, a user found out Crucial BX100 SSD can't get mounted. Crucial BX100 SSD 500GB drive don't work well with min_power. This also happens to med_power_with_dipm. So let's disable LPM for Crucial BX100 SSD 500GB drive. BugLink: https://bugs.launchpad.net/bugs/1726930 Signed-off-by: Kai-Heng Feng Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit ec5a70a81cd28bf3428611f16e004633291c4dce Author: Hans de Goede Date: Fri Feb 16 10:48:20 2018 +0100 libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs commit 9c7be59fc519af9081c46c48f06f2b8fadf55ad8 upstream. Various people have reported the Crucial MX100 512GB model not working with LPM set to min_power. I've now received a report that it also does not work with the new med_power_with_dipm level. It does work with medium_power, but that has no measurable power-savings and given the amount of people being bitten by the other levels not working, this commit just disables LPM altogether. Note all reporters of this have either the 512GB model (max capacity), or are not specifying their SSD's size. So for now this quirk assumes this is a problem with the 512GB model only. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=89261 Buglink: https://github.com/linrunner/TLP/issues/84 Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit 83c164363b8a891cc8d3a3abdfce79ba3956059e Author: Eric Biggers Date: Sat Feb 3 20:33:27 2018 -0800 libata: remove WARN() for DMA or PIO command without data commit 9173e5e80729c8434b8d27531527c5245f4a5594 upstream. syzkaller hit a WARN() in ata_qc_issue() when writing to /dev/sg0. This happened because it issued a READ_6 command with no data buffer. Just remove the WARN(), as it doesn't appear indicate a kernel bug. The expected behavior is to fail the command, which the code does. Here's a reproducer that works in QEMU when /dev/sg0 refers to a disk of the default type ("82371SB PIIX3 IDE"): #include #include int main() { char buf[42] = { [36] = 0x8 /* READ_6 */ }; write(open("/dev/sg0", O_RDWR), buf, sizeof(buf)); } Fixes: f92a26365a72 ("libata: change ATA_QCFLAG_DMAMAP semantics") Reported-by: syzbot+f7b556d1766502a69d85071d2ff08bd87be53d0f@syzkaller.appspotmail.com Cc: # v2.6.25+ Signed-off-by: Eric Biggers Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit 72e377fb1b0b42016abe1f923e7a6ccbdc81cc60 Author: Eric Biggers Date: Sat Feb 3 20:30:56 2018 -0800 libata: fix length validation of ATAPI-relayed SCSI commands commit 058f58e235cbe03e923b30ea7c49995a46a8725f upstream. syzkaller reported a crash in ata_bmdma_fill_sg() when writing to /dev/sg1. The immediate cause was that the ATA command's scatterlist was not DMA-mapped, which causes 'pi - 1' to underflow, resulting in a write to 'qc->ap->bmdma_prd[0xffffffff]'. Strangely though, the flag ATA_QCFLAG_DMAMAP was set in qc->flags. The root cause is that when __ata_scsi_queuecmd() is preparing to relay a SCSI command to an ATAPI device, it doesn't correctly validate the CDB length before copying it into the 16-byte buffer 'cdb' in 'struct ata_queued_cmd'. Namely, it validates the fixed CDB length expected based on the SCSI opcode but not the actual CDB length, which can be larger due to the use of the SG_NEXT_CMD_LEN ioctl. Since 'flags' is the next member in ata_queued_cmd, a buffer overflow corrupts it. Fix it by requiring that the actual CDB length be <= 16 (ATAPI_CDB_LEN). [Really it seems the length should be required to be <= dev->cdb_len, but the current behavior seems to have been intentionally introduced by commit 607126c2a21c ("libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs") to work around a userspace bug in mplayer. Probably the workaround is no longer needed (mplayer was fixed in 2007), but continuing to allow lengths to up 16 appears harmless for now.] Here's a reproducer that works in QEMU when /dev/sg1 refers to the CD-ROM drive that qemu-system-x86_64 creates by default: #include #include #include #define SG_NEXT_CMD_LEN 0x2283 int main() { char buf[53] = { [36] = 0x7e, [52] = 0x02 }; int fd = open("/dev/sg1", O_RDWR); ioctl(fd, SG_NEXT_CMD_LEN, &(int){ 17 }); write(fd, buf, sizeof(buf)); } The crash was: BUG: unable to handle kernel paging request at ffff8cb97db37ffc IP: ata_bmdma_fill_sg drivers/ata/libata-sff.c:2623 [inline] IP: ata_bmdma_qc_prep+0xa4/0xc0 drivers/ata/libata-sff.c:2727 PGD fb6c067 P4D fb6c067 PUD 0 Oops: 0002 [#1] SMP CPU: 1 PID: 150 Comm: syz_ata_bmdma_q Not tainted 4.15.0-next-20180202 #99 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 [...] Call Trace: ata_qc_issue+0x100/0x1d0 drivers/ata/libata-core.c:5421 ata_scsi_translate+0xc9/0x1a0 drivers/ata/libata-scsi.c:2024 __ata_scsi_queuecmd drivers/ata/libata-scsi.c:4326 [inline] ata_scsi_queuecmd+0x8c/0x210 drivers/ata/libata-scsi.c:4375 scsi_dispatch_cmd+0xa2/0xe0 drivers/scsi/scsi_lib.c:1727 scsi_request_fn+0x24c/0x530 drivers/scsi/scsi_lib.c:1865 __blk_run_queue_uncond block/blk-core.c:412 [inline] __blk_run_queue+0x3a/0x60 block/blk-core.c:432 blk_execute_rq_nowait+0x93/0xc0 block/blk-exec.c:78 sg_common_write.isra.7+0x272/0x5a0 drivers/scsi/sg.c:806 sg_write+0x1ef/0x340 drivers/scsi/sg.c:677 __vfs_write+0x31/0x160 fs/read_write.c:480 vfs_write+0xa7/0x160 fs/read_write.c:544 SYSC_write fs/read_write.c:589 [inline] SyS_write+0x4d/0xc0 fs/read_write.c:581 do_syscall_64+0x5e/0x110 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x21/0x86 Fixes: 607126c2a21c ("libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs") Reported-by: syzbot+1ff6f9fcc3c35f1c72a95e26528c8e7e3276e4da@syzkaller.appspotmail.com Cc: # v2.6.24+ Signed-off-by: Eric Biggers Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit d850931005ff6e5dde77b1375ff8ce0a332cb24d Author: Takashi Iwai Date: Thu Mar 22 10:40:27 2018 +0100 ALSA: aloop: Fix access to not-yet-ready substream via cable commit 8e6b1a72a75bb5067ccb6b56d8ca4aa3a300a64e upstream. In loopback_open() and loopback_close(), we assign and release the substream object to the corresponding cable in a racy way. It's neither locked nor done in the right position. The open callback assigns the substream before its preparation finishes, hence the other side of the cable may pick it up, which may lead to the invalid memory access. This patch addresses these: move the assignment to the end of the open callback, and wrap with cable->lock for avoiding concurrent accesses. Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit e88d13e367f26bd2623ff428fcfbf5d3d15e3ad6 Author: Takashi Iwai Date: Thu Mar 22 08:56:06 2018 +0100 ALSA: aloop: Sync stale timer before release commit 67a01afaf3d34893cf7d2ea19b34555d6abb7cb0 upstream. The aloop driver tries to stop the pending timer via timer_del() in the trigger callback and in the close callback. The former is correct, as it's an atomic operation, while the latter expects that the timer gets really removed and proceeds the resource releases after that. But timer_del() doesn't synchronize, hence the running timer may still access the released resources. A similar situation can be also seen in the prepare callback after trigger(STOP) where the prepare tries to re-initialize the things while a timer is still running. The problems like the above are seen indirectly in some syzkaller reports (although it's not 100% clear whether this is the only cause, as the race condition is quite narrow and not always easy to trigger). For addressing these issues, this patch adds the explicit alls of timer_del_sync() in some places, so that the pending timer is properly killed / synced. Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 02dd9876ab94bc045c115c14177088ae3bdfb152 Author: Kirill Marinushkin Date: Mon Mar 19 07:11:08 2018 +0100 ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit commit a6618f4aedb2b60932d766bd82ae7ce866e842aa upstream. Currently, the offsets in the UAC2 processing unit descriptor are calculated incorrectly. It causes an issue when connecting the device which provides such a feature: ~~~~ [84126.724420] usb 1-1.3.1: invalid Processing Unit descriptor (id 18) ~~~~ After this patch is applied, the UAC2 processing unit inits w/o this error. Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0") Signed-off-by: Kirill Marinushkin Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman